Reviews Quick Release Plate For Glidecam

SmallRig AD-01 Video Tripod 73 Heavy Duty Tripod with 360 Degree Fluid Head and Quick Release Plate for DSLR Camcorder Cameras 3751

  • 【Dual-Mode Quick-Release Plate Mount】The fluid head is compatible with two modes of quick-release plates - Mode for DJI RS 2/RS3/RS3 PRO, and for Manfrotto. This dual-mode mount design allows you to switch between the two quick-release plate. Equip with quick release plate for Manfrotto(standard mode), fitted with 1/4"-20 screws and 3/8-16" screws, making the video head compatible with most cameras..
  • 【Stable and Adjustable Tripod】Professional heavy duty aluminum double-tube tripod with built-in bubble level, high-strength aluminum alloy double-row tubes and 75mm bowl bottom, which can provide better stability for the video tripod. The adjustable height of the travel tripod is: 85-186cm/33-73in, and the maximum load is: 8KG/17LBS..
  • 【Professional Fluid Head】Built-in damping and balancing system enable 360° horizontal and +90°/-75° vertical movements.The camera fluid head adopts side-pressed quick release, which can be unlocked by pushing the side button to realize the quick disassembly and installation of the camera..
  • 【Expandability and Easy to Storage】There are three 1/4''-20 threaded holes on the tripod bracket to meet your various needs for expanding external devices such as monitors, video lights, and magic armm etc. The quick relea....
Check Stock

Tripod Level Stand, 1.2M Aluminum Alloy Tripod Level Stand for Automatic Self Leveling Level Measurement Tool with Bag

  • 3-way joint head with standard removable quick release plate.
  • With clever design, quick release flip locks, and non-slip, wear-resisting rubber feet.
  • 4-section legs with brace, adopted of high quality aluminum alloy, strong and durable in use.
  • Suitable for most automatic self leveling level.
Check Stock

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

  • The quick release plate is compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. Also could be mounted with camera or camera cage on the top. It is anti-skid designed..
  • There is off-rail prevention on the quick release base, preventing QR plate from removal accidental. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
  • The 15mm rod riser clamp (with 15mm rods in vertical and horizontal) is adjustable quickly in height or both front and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
  • Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
  • Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw....
Check Stock

NICEYRIG 15mm Shoulder Pad with Quick Release Baseplate for Manfrotto, 15mm Rod Clamp Applicable for Video Camcorder Camera DV/DC Support System DSLR Rig

  • The Camcorder Shoulder support kit is designed for poeple who keep long time shooting to help release pressure. The design of the 15mm shoulder pad integrates with ergonomics, which makes it very soft and comfortable. The shoulder pad improves stability on photographing. Plenty of room and holes for mounting balance weights, V-Mount batteries, etc. A great assisstant for you..
  • Quick release plate kit is mounted on 15mm shoulder pad with two 1/4 screw. Compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod directly. So you could switch your shoulder-shoulder shooting to tripod shooting quickly..
  • There is off-rail prevention on the mounting baseplate, preventing QR plate from removal accidentally. The wingnut with the ability to change the position of the knob to tighten or unscrew to make the QR plate quick release..
  • The 15mm rod clamp also is mounted on the shoulder plate for you adding to your video rig..
  • Made of aluminum alloy and sponge, lightweight and durable. Net weight: 17oz.
Check Stock

NICEYRIG Quick Release Base Plate Compatible with Manfrotto 577 501 504 701 for DSLR Camera 15mm Rail Support System

  • Quick release plate kit is designed to DSLR camera switching four shooting mode quickly as your needs. You could quickly switch between four shooting....
  • Compatible with Manfrotto 577, 501, 504, 701, the quick release plate could replace your Manfrotto quick release plate and be mounted on tripod....
  • There is off-rail prevention on the quick release base, preventing QR plate from removal accidental. The wingnut with the ability to change the....
  • The pack could also be mounted on 15mm shoulder pad with two 1/4 screw, also could serve as a very important part of 15mm rail support system..
  • Made of aluminum alloy, lightweight and durable..
Check Stock

LRONG 1Pc Tripod Quick Release Plate Camera Mounting Adapter Replacement for Quantaray, Sunpak 5800d 7000tm, Targus TG-P60T Tripod Mount QR-57, 4.3cm4.3cm

  • The square size of the bayonet of the quick release plate is 4.3cm*4.3cm/1.73in*1.73in. Please measure whether your gimbal is around 4.3cm*4.3cm/1.73in*1.73in..
  • This quick release plate is common to the following brands and models: Yunteng: 590 600 668 688 690 888 60 80 888.
  • Sony: D680 D580 VCT-50AV VCT-60AV VCT-80AV.
  • Admiralty: EX-638 CX-888 CX-460mini CX-460 CX-470 CX-570 CX-690 CX-444 DF-50..
  • The gimbal is equipped with a portable detachable quick-release plate, which can be easily removed and screwed on the camera before shooting, saving time and effort when hand-held shooting and shooting on a tripod are interchanged..
  • The standard 1/4 nut is firmly combined with the camera screw, and the bottom of the quick release plate can be reinforced with a coin..
  • Package content: 1 quick-release plate for tripod head, bayonet square size is 4.3cm*4.3cm/1.73in*1.73inch..
Check Stock

SMALLRIG Quick Release Shoulder Plate for Sony VCT-14 Tripod Adapter with Rosettes - 2837

  • 【Quick Release Design】SmallRig Shoulder Pad Pro 2837 is designed for SONY VCT-14 quick release baseplate, which fits the camera through a quick release plate for Manfrotto 501. Users can realize a rapid switch between shoulder shooting and tripod shooting through the shoulder pad..
  • 【15mm LWS rod adapter】The front and rear ends of the dual rod system have a standard diameter of 15mm and a spacing of 60mm. Moreover, the front-end dual rod system can save 24mm for up-regulating, which can guarantee the spacing between the lens center of FX9, FS5, for URSA MINI, for CANON C300, and other devices to be 85mm as the standard..
  • 【M6 Rosette】Both sides of the shoulder pad are standard M6 rosette mount, which can be installed with the original control handle of 1810 or FX9 machines..
  • 【Center Gravity Adjustable】This item can be adjusted forward about 80mm through the built-in quick release plate in order to facilitate users to adjust the equipment’s center gravity and install the following focus and matte box.
  • the front two tubes can be adjusted together with the quick release plate, so there is no need to remove the equipment such as follow focus and matte box..
  • 【Extra Mounting Points】The right side of 2837 is reserved with a 1/4 "-20 threaded....
Check Stock

UTEBIT 50mm Arca Swiss Quick Release Plate Aluminum QR Clamp Adapter Set with 3/8'&1/4' Screw Hole and Built-in Bubble Level Compatible for Manfrotto DSLR Camera Tripod Ball Head Monopod

  • 【Arca-Swiss quick release plate】Straight-grain knobs (non-apron design, no idling). Compared with ordinary quick release boards, it is more slip resistant and anti-dropping. Compatible with Arca-Swiss standard quick release plate of Manfrotto be free. ※Clamping range: 40-45mm.
  • 【Build In Bubble Level】There are three levels of level included (both sides of the quick release plate & the side of the locking knob), to help you perceive your position more accurately..
  • 【Corrosion resistance & anti-skid】 The quick release plate is made of high-strength aluminum alloy material, which has undergone anodized surface treatment, which is corrosion-resistant and wear-resistant.
  • it has a non-slip function, which can well protect the camera. ※L-shaped inner hexagonal small wrench is included. The design is simple and light. Both ends of the (wrench) can be used..
  • 【With ruler & 3/8 to 1/4 screw】you can use the attached 1/4 screw to directly connect to a tripod/monopod for indoor and outdoor photography..
  • 【Size & Product List】1xMount:7.6x5cm,1xQuck release plate:3.7x5cm,1xHexagon wrench. Please look carefully that the size suits yours..
Check Stock

SMALLRIG Universal Quick Release Tripod Adapter Plate for Sony VCT-14-2169

  • 【FOR TRIPOD SHOOTING】The tripod adapter plate with V-wedge front is for Sony VCT-14 standard, you can use with standard VCT-14 shoulder plate,....
  • 【SAFETY LOCKING SYSTEM】There is no slack and the camcorder is locked solidly to the baseplate since a spring-loaded rear pin is equipped to....
  • 【QUICK RELEASE INSTALL】Features a safety release lever on the side for quick release, and it’s completely hands-free to lock into place.
  • 【EXTRA MOUNTING HOLES】Comes with plenty of 1/4"-20 and 3/8"-16 threaded holes on the bottom for adapting different quick release plate.
  • 【FULL-METAL CONSTRUCTION】All-metal construction is extremely solid, which reduces the potential risk of breaking. Meanwhile, the smooth coating....
Check Stock

SLIK Pro CF-834 4-Section 65' Carbon Fiber Tripod Black (615-923)

  • Ths Slik Quick Release Plate is a spare or replacement quick release plate for the DQ-10 quick release adapter, and the SBH-100 DQ and SBH-120 DQ Ballheads..
  • It features a 1/4 inch-20 camera screw and a secure cork pad..
Check Stock

Fiddler On the Roof

  • ✅This MEKNIC Camera Quick Release Plate is a replacement camera plate that fits the Arca-type quick release element of ball head models. For camera....
  • ✅Alloy aluminum material for this MEKNIC camera tripod mounting plate, Advanced CNC precision machine provide precise dimension to fit perfectly,....
  • ✅Special anti-slip rubber pads enhance the grip between each plate and the mounted gear, and protect the gear from any damage due to mounting.....
  • ✅Compatible with 1/4″-20 camera screw.Compatible with Standard for Tripod Ball Head for Camera Tripod Ballhead..
  • ✅Two studs on the bottom of the plate help prevent the camera and plate from sliding all the way forward or backward out of the ball head, in case....
Check Stock

Heavy Hands [Explicit]

  • EXTRA HEAVY DUTY & PORTABLE: The repair stand is made of aluminum with heavy duty alloy and strong head and clamps. It is light weighted, and compact when folded. It is very convenient, durable and well-designed. Max Bike weight: 50kg or 110 lbs.
  • HEIGHT ADJUSTED: Quick Release Adjustable (1m-1.5m or 39"-59" Fully extended). The height, tilt, and angle all have quick release with strong skewers. So that is very helpful to get the bike in the optimal working position for you..
  • ROTATED HEAD: Smart design: head rotated:360 Degree by quick release and turning knob. The teeth and clamp are well made and heavy duty. It could hold max. 50 kg or110 lbs bike at any angle..
  • TOOL PLATE: Foldable magnetic tool plate included. Simply attach or remove the tool plate by hand for quick easy set up and storage..
  • DURABLE: It has been approved to be one of most reliable and durable bicycle repair stands available for home or shop uses. We can offer 5 years warranty on the rack and keep enough parts for any claim in our warehouse..
Check Stock

BlackRapid RFH-1E0 Fastenr Tripod FR-T1 Black

  • Make your Manfrotto RC2 Quick Release Plate R-Strap ready with Manfrotto RC2 Quick Release Plates.
  • Eliminates the need to remove the quick-release plate.
  • Works with all current R-Strap models, allowing you to move between handheld.
  • Includes replacement bolt, C-clip, spacing washers and instructions.
Check Stock