Reviews Quick Release Hose Clamps

Hose Clamp, Stainless Steel Hose Clamps for 1 Inch to 2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line, Mechanical, 10 PCS Hose Clamp Set

  • ...sign, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are widely applicable to home, industrial, gardening, mechanical, automotive, electronic, boat, marine, indoor outdoor, perfect for radiator, seal hoses, water pipes, plumbing, fittings, cables, tubes, fuel lines, cars, trucks etc.. Heavy duty metal hose clamps are ideal for installation in tight-fitting or hard to reach places..
  • What You Will Get --- 10 pieces hose clamp, packed in a durable handy case. We are committed to improving customer satisfaction, if you have any questions, please feel free to contact us! We promise unconditional replacement or full refund..
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • ...sign, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are widely applicable to home, industrial, gardening, mechanical, automotive, electronic, boat, marine, indoor outdoor, perfect for radiator, seal hoses, water pipes, plumbing, fittings, cables, tubes, fuel lines, cars, trucks etc.. Heavy duty metal hose clamps are ideal for installation in tight-fitting or hard to reach places..
  • What You Will Get --- 10 pieces hose clamp, packed in a durable handy case. We are committed to improving customer satisfaction, if you have any questions, please feel free to contact us! We promise unconditional replacement or full refund..
Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

  • [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
  • [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
  • [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
  • [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
  • [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check Stock

POWERTEC 70101 4\ Double Wire Hose Clamp | 5 Pack

  • INCLUDES: 4 inch Double Wire Hose Clamps – Pack of 5.
  • APPLICATION: These carbon double wire clamps with zinc coating are perfect for rubber and PVC hoses, and work brilliantly with spiral wire dust collection systems, industrial vacuum cleaners, or even pool pump hoses.
  • Quality: delivers a heavy duty, leak proof and corrosion resistant hose clamping tool Constructed out of premium grade stainless steel built for durability.
  • FUNCTIONALITY: 4” ring hose clamps designed to provide a secure and flexible option for connecting pipes to dust hoods, blast gates and other dust collection fittings.
  • EASY TO USE: Simple release and tighten the screw to adjust the clamp diameter.
Check Stock

POWERTEC 70215 2-Inch Double Wire Hose Clamp | 5-Pack

  • INCLUDES: 2 inch Double Wire Hose Clamps – Pack of 5.
  • APPLICATION: These carbon double wire clamps with zinc coating are perfect for rubber and PVC hoses, and work brilliantly with spiral wire dust collection systems, industrial vacuum cleaners, or even pool pump hoses.
  • QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel built for durability.
  • FUNCTIONALITY: 2” ring hose clamps designed to provide a secure and flexible option for connecting pipes to dust hoods, blast gates and other dust collection fittings.
  • EASY TO USE: Simple release and tighten the screw to adjust the clamp diameter.
Check Stock

POWERTEC 70197 2-1/2-Inch Double Wire Hose Clamp | 5-Pack

  • "INCLUDES: 2.5 inch Double Wire Hose Clamps – Pack of 5".
  • APPLICATION: These carbon double wire clamps with zinc coating are perfect for rubber and PVC hoses, and work brilliantly with spiral wire dust collection systems, industrial vacuum cleaners, or even pool pump hoses.
  • QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel built for durability.
  • FUNCTIONALITY: 2-1/2” ring hose clamps designed to provide a secure and flexible option for connecting pipes to dust hoods, blast gates and other dust collection fittings.
  • "EASY TO USE: Simple release and tighten the screw to adjust the clamp diameter".
Check Stock

Taytools 114943 5-Piece 4” Easy Release Spring Clamps Double Loop Dust Collector Hose Clamps

  • Squeeze both rubber grip ends to expand and release double wire hose clamp.
  • Spring steel maintains pressure to hold hose securely in place.
  • Double-Loop design has tighter grip on hose.
  • Includes five (5) Easy Release hose clamps.
Check Stock

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

  • HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
  • CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
  • WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
  • EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..
Check Stock

STEELSOFT Extra Thick (6-ply) Flexible Dryer Vent Duct Hose 4 inch 8 Feet Heavy Duty, 4'' Aluminum Foil Ducting Pipe Tube Dryer Hose Vent Kit with 4 Metal Hose Clamps

  • ...er is slightly larger than 4'' to fit most US standard dryer vent hose connector. Both inner plastic reinforced ends are great for quick installation. The flexible dryer vent hose maintains 4in diameter inside, whether compressed or stretched. Stretch it to 8 ft long or compress a little for 5 feet short..
  • More Hose Clamps: Our dryer vent hose kit is with 4 piece hose clamps. 2 wing nut hose clamps are perfect to dryer vent hose for tight space quick connect or disconnect, as you do not need a tool. For some dryer models, the key type maybe not available so you can use other 2 pcs 5/16" Hex dryer hose clamps optional..
  • Multi-Purpose: STEELSOFT 4 inch flexible duct is very handy for many HVAC applications, such as clothes dryer vent pipe, bathroom exhaust fan, grow tent vent and portable ac unit. It is a durable and heavy duty 4 inch flex duct hose for less replacement!.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping

  • Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
  • Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
  • All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
  • Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
  • Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock