Reviews Quick Connect Clamps

Dumble Heavy Duty Jumper Cable and Quick Connect Heavy Duty Jumper Cables 1 Gauge Jumper Cables for Cars Trucks 30ft

  • BE PREPARED: Keep the Dumble RV Supplies | Quick Connect Jumper Cable 800 Amp Jumper Cables Long Jumper Cables 30 ft Jumping Cable for Cars in your trunk or car emergency kit so you can safely boost jump your vehicle whenever need.
  • Car jump start cable has 800 Amps peak engine starting current at 12V DC end and 100 Amps at 110V AC service end (175A-600V for disconnect use only – not for interrupting current).
  • FITS YOUR VEHICLE: 1 gauge thick professional grade copper wire to handle more amps and lose less when jumping.
  • 30-foot (9.1m) long cables for car or even tow truck.
  • 4-inch x 5.75-inch (10.2cm x 14.6cm) overall clamp size with 0.25-inch to 1.7-inch (0.6-4.3cm) jaw opening to access tight spots and clamp to top and side post batteries on your vehicle (works for electronic ignitions and other vehicles as long as polarity is correctly observed and battery terminals are accessible).
  • PERMANENT INSTALLATION: Battery booster cable has 4 color-coded clamps to prevent crossing wires – 2 red positive (+) and 2 black negative (-).
  • Connect 5.75-foot (1.8m) long permanent eyelet ring terminal ends to functioning battery and 24.25-foot (7.4m) long alligat....
Check Stock

Homebrew Pin Lock Disconnect Pin Lock Barb Quick Disconnect with Free Hose Clamp for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect Barb type (3 pcs), Pin Lock Liquid Disconnect Barb type (3 pcs), Worm Clamps 6 pcs.
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Worm Clamps.
  • 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 3/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
  • 4.Use: The Pin Lock Barb Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stock

Worx Clamping Sawhorses & Pegasus Work Table

  • Product 1: [WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two.
  • Product 1: [CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer.
  • Product 1: [LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store.
  • Product 1: [CONNECT MULTIPLE TABLES] Create a whole work counter when you link 3 or more Pegasus’ together. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs.
  • Product 2: [CUSTOM MADE CLAMPS] These two sawhorses come with integrated bar clamps to fasten big or small projects securely in both vertical and horizontal positions.
Check Stock

HighFree Oil Change Pump Extractor 12V 60W Oil Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump with Hose for Boat Tubes Truck RV ATV Yellow Yellow

  • 【12V 60W Oil Extractor Pump】Included: 1 x Pump.
  • 【Specification】: Oil Diese extractor pump's Voltage: DC12, Maximum current: 5A, Maximum power: 60W. Perfect for quick and easy oil changes that....
  • 【Quick and Clean】Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple....
  • 【Note】This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. But pls note that NOT suitable for extracting:....
  • 【Easy to Use】You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the....
Check Stock

OKOOLCAMP Oil Change Pump Extractor -12V 60W Marine Oil Extractor Pump for Boat Truck RV ATV Diesel Scavenge Suction Pump 60W

  • Quick and Efficient- Oil Extractor Pump, a good helper for quick and clean oil changing. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃):....
  • Premium Quality-Pure copper motor and conductive clips, with good electrical conductivity, corrosion resistance and rust resistance. Fully enclosed....
  • Easy to Use-Install the oil transfer pump inlet and outlet hoses, tighten the hose clamps, connect the power clamps to the vehicle battery and turn on....
  • Operation Tips-Except ENGINE OIL/DIESEL/BIODIESEL, this oil extractor CAN NOT extract WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. Before use,....
  • Widely application-This professional oil suction pump is lightweight, portable and easy to operate, it provides quick and clean oil changes, saving....
Check Stock

WMYCONGCONG Oil Quick Change Pump Extractor 12V 60W Fluid Extractor Motor Oil Diesel Transfer Pump for Car Boat Motorbike Quad RV ATV and Other Vehicles

  • 12V 60W Oil diesel extractor pump's perfect for quick and easy oil changes that you can do at home, help your oil-cleaning task, time-saving..
  • Ideal for motorcycles, cars, quads, truck, boat, forklift, generator, tractor, scooter and other 12v vehicles. But NOT suitable for gasoline/petrol.....
  • Easy to use, just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps to the car....
  • Efficient for fast and clean oil changes, It is very suitable for pumping motor oil, diesel and heating oil, and can be used in equipment such as car....
  • Package Content: 1 x 12V 60W Oil Extractor Pump.
Check Stock

Dual Drum Clamp with 360° Rotation - V-to-V Ratcheting Clamp - Mounting Bracket with Quick-Release Double Clamp - Extended 8.5” Length - By DRUMTOP

  • DRUMTOP Dual Clamp is an accessory that can be used to attach add-on boom arms or L-arm to existing stands, or to connect various pipes within your kit.
  • It offers the ability to add cymbals, toms, and any other percussion items where it is difficult or impractical to use a full stand.
  • This double mounting bracket allows 360 degree rotation between the two clamps to connect arms, pipes, booms, and other drum accessories.
  • Its extended length of 8.5” allows more space between hardware - It attaches to any stand pipe or arm using its 2 quick-release clamps.
  • Made of high precision cast consisting of tough alloys for consistent, reliable, performance and durability.
Check Stock

SDTC Tech 1-Pack Drain Saddle Valve with 1/4 Quick Connect Plastic Water Filters Valve Clamp for Reverse Osmosis System

  • Package inlcudes 1/4" quick connect drain saddle valve, used with reverse osmosis (RO) systems..
  • 1/4" quick connect fitting with leak proof filter element, allows easy tubing connections, to discharge waste water..
  • Made of POM material, hard texture, abrasion resistance, impact resistance and aging resistance..
  • Fit for 40 - 50 mm OD pipe, can used for under counter water filter systems..
  • Comes with bolts, nuts and clamps, easy to install and can resist 3.0MPa pressure without leakage..
Check Stock

Lotyes Quick Oil Change Pump, DC 12V 60W Oil Diesel Fluid Pump Extractor Transfer Pump & Tubes Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles

  • Efficient Extraction Pump: To pump your motor oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes! Otherwise, the oil change pump may have low suction or jammed. Lotyes oil change pump replaces manual operation and works by connecting the clamps to the vehicles 12V battery. It's high efficiency, rapid and saving effort..
  • Clean and Tidy: An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent leakage during the extraction process..
  • Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on..
  • Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC)..
  • What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk....
Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

  • [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
  • [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
  • [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
  • [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
  • [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check Stock

A Faster Horse

  • [WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two.
  • [CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer.
  • [LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store.
  • [CONNECT MULTIPLE TABLES] Create a whole work counter when you link 3 or more Pegasus’ together. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last.
Check Stock

STEELSOFT Extra Thick (6-ply) Flexible Dryer Vent Duct Hose 4 inch 8 Feet Heavy Duty, 4'' Aluminum Foil Ducting Pipe Tube Dryer Hose Vent Kit with 4 Metal Hose Clamps

  • ...perature, not be easily aged in hot and moist dryer vent ducting condition and not easily ripped! It will not melt under high heat and emit unhealthy plastic smell like other pvc exterior type dryer duct..
  • In Right Size: Our dryer duct hose diameter is slightly larger than 4'' to fit most US standard dryer vent hose connector. Both inner plastic reinforced ends are great for quick installation. The flexible dryer vent hose maintains 4in diameter inside, whether compressed or stretched. Stretch it to 8 ft long or compress a little for 5 feet short..
  • More Hose Clamps: Our dryer vent hose kit is with 4 piece hose clamps. 2 wing nut hose clamps are perfect to dryer vent hose for tight space quick connect or disconnect, as you do not need a tool. For some dryer models, the key type maybe not available so you can use other 2 pcs 5/16" Hex dryer hose clamps optional..
  • Multi-Purpose: STEELSOFT 4 inch flexible duct is very handy for many HVAC applications, such as clothes dryer vent pipe, bathroom exhaust fan, grow tent vent and portable ac unit. It is a durable and heavy duty 4 inch flex duct hose for less replacement!.
Check Stock

Nexel WB9630BSS Stainless Steel Worktable with Backsplash 96 W x 30 D x 35 H

  • [WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two.
  • [CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed....
  • [LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store.
  • [CONNECT MULTIPLE TABLES] Create a whole work counter when you link 3 or more Pegasus’ together. Whether your worksite or workshop is spacious or....
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you....
Check Stock