Reviews Quick Change Insert Tool

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
  • This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inle....
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC2135 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Stainless Steel - fnx 0.006 in/r(0.003-0.008), vc 330 sfm(290-415), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 410 sfm(365-500), fnz 0.016 in(0.009-0.022).
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC3115 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Cast Iron - fnx 0.006 in/r(0.003-0.008), vc 540 sfm(480-650), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 690 sfm(610-840), fnz 0.016 in(0.009-0.022).
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • ...efficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, second, put one end of the oil pipe into the slot and fix it, align the thimble. Then put the oil needle on the stainless steel thimble, next, rotate the thimble until the oil needle meets the tubing core. Rotate the thimble until the oil needle is fully pressed into the core. Finally, oil needle installation is completed..
  • [Wide Applications] Bicycle hydraulic disc brake hose kit is compatible for Shimano 355/395/396/445/446/447/486/505/575. The upgraded needle drive insertion tool is perfect for bike shop bike hydraulic hose tools. Secured double-ended driver is compatible with standard or torqued needles..
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC3115 Grade, Multi-Layer Coating, 2 Cutting Edges, N123J2-0635-RM, 0.1252\ Corner Radius, J Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving iinsert.
  • INSERT SEAT SIZE J = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Cast Iron - fnx 0.009 in/r(0.006-0.011), vc 470 sfm(440-530), fnz 0.019 in(0.009-0.027).
  • Steel - fnx 0.009 in/r(0.006-0.011), vc 600 sfm(550-680), fnz 0.019 in(0.009-0.027).
Check Stock

Thomegoods 3Pcs Multi Quick Change Keyless Chuck Replacement for Dremel 4486 Rotary Tools 3000 4000 7700 8200

  • Accepts accessory rotary bits with 1/32-inch(0.8mm) to 1/8-inch(3.2mm) shanks.
  • Quick change chucks Only fit for rotary tools 3000 4000 7700 8200, NOT fit for other rotary tools.
  • Please note: Only suitable for rotary tool models 275, 285, 398.
  • Also suitable for models 750, 770 and 781 Use with rotary tool models 4000, 400,....
  • Easy and quick to change accessories replacement on multi tool without changing collets.
  • Package Included: 3 x Quick Change Keyless Chucks.
Check Stock

DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch)

  • DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel.
  • DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel.
  • All quick change mandrels feature double set screws with a recessed combination head for quick and easy centering bit changes.
  • All quick change mandrels utillize hardened steel construction and have been tested through 15,000+ cycles to deliver jobsite durability.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications..
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC1125 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Steel - fnx 0.006 in/r(0.003-0.008), vc 560 sfm(500-680), fnz 0.016 in(0.009-0.022).
  • Stainless Steel - fnx 0.006 in/r(0.003-0.008), vc 455 sfm(405-550), fnz 0.016 in(0.009-0.022).
  • Super-alloys & Titanium - fnx 0.006 in/r(0.003-0.008), vc 105 sfm(95-130), fnz 0.016 in(0.009-0.022).
  • Cast Iron - fnx 0.006 in/r(0.003-0.008), vc 390 sfm(350-460), fnz 0.016 in(0.009-0.022).
Check Stock

Sandvik Coromant, QS-410, QS™ Holding System Clamping Wedge (Pack of 1)

  • Benefits of this product family : Easy tool change for reduced downtime.
  • Single screw release of holder simultaneously pulls out the wedge, for easy tool change and set-up.
  • Spring clamping mechanism of the wedge eliminates the risks of tool holder dropping into the machine.
  • No diameter adjustment is necessary thanks to the back stop – close repeatability tolerance for insert edge position.
  • QS holding system can be quickly mounted on the machine with no reconstruction.
Check Stock

Sandvik Coromant, QS-31, QS™ Holding System Clamping Wedge (Pack of 1)

  • Benefits of this product family : Easy tool change for reduced downtime.
  • Single screw release of holder simultaneously pulls out the wedge, for easy tool change and set-up.
  • Spring clamping mechanism of the wedge eliminates the risks of tool holder dropping into the machine.
  • No diameter adjustment is necessary thanks to the back stop – close repeatability tolerance for insert edge position.
  • QS holding system can be quickly mounted on the machine with no reconstruction.
Check Stock

Invisible Glass 95180 Non Elastic Reach and Clean Tool Quick Change Non Elastic Microfibers, Pack of 6

  • NEW AND IMPROVED: Non-Elastic Quick Change Microfibers attach in just seconds to save time and fustration of fitting bonnets. Covers fit Invisible Glass tool Wet Dry Pro and 2-Piece Quick Change tool..
  • WAFFLE WEAVE: Invisible Glass Quick Change Microfibers use a waffle weave texture which absorbs more liquid than standard microfibers.
  • WASHABLE: Simply remove the washable microfiber and throw it in the wash for a consistent streak-free, lint-free clean that leaves any glass looking new.
  • REVERSIBLE: Easily reverse the cleaning cloth for even more glass-cleaning power! Enjoy a remarkable clean that other tools simply can’t match!.
  • REUSABLE: Why waste time and money with streaky paper towels? Our Invisible Glass Quick Change Microfibers are reusable and leave a stunning shine that will make your windows look like new!.
Check Stock

JORGENSEN Oscillating Tool 5°Oscillation Angle, 4 Amp Oscillating Multi Tools Saw, 7 Variable Speed with 16-piece Electric Multitool Blades & Carrying Bag - 70800

  • ...iece Electric Multitool Accessories - Includes 1-5/16" Flush-Cut Wood Sawblade, 1-5/16" Bi-Metal Flush-Cut Universal Sawblade, 2-11/16" Flush-Cut Wood Sawblade, 3-1/2'' Flush Cut Oscillating Tool Blade, Oscillating Scraper Blade, Oscillating Sanding Pad, 10 Pcs Sanding Paper: 60/ 80/ 120/ 180/ 240 grit x2 Pcs.
  • Quick Change - JORGENSEN vibrating saw achieve quick change of the blades. Additional locking bracket protects your finger from clipping in the blade-change-process. Quick-Change Attachments design provides you higher efficiency by saving time.
  • 7 Variable Speed & Wide Applications - 6-speed switches allow users to.
  • JORGENSEN oscillating tool has 7-speed position with 8,000-16,000 OPM, that appropriate output speed can be easily customized to your needs while working. With versatile accessories, you can use this tool to do various household projects, such as cutting, scraping, sanding, cleaning, polishing and more.
  • Ergonomic Design - Slim body engonomic design soft grip provides the best cutting performance for long-time usage, in the meantime provides convenient and stable operation for users.
  • Universal fit system matches most brands of blades or other accessories.
Check Stock

Bxa 250-222 Tool Post Set QC Wedge Type Quick Change Turning and Facing Holders for Lathe Swing 10 -15 8

  • The wedge type tool post set is made of steel, which is firm and durable, not easy to wear and prolong the service life.
  • The quick change tool post set is precisely designed and finely ground to ensure repeatability and precision.
  • Quick change tool holder set is hardened, with high hardness and rigidity, so it is not easy to vibrate during processing.
  • The wedge type tool post set is the main accessory of an ordinary lathe, and different tool holders can be selected according to the processing requirements.
  • Including: 250-222, 250-201, 250-202, 250-204, 250-207, 250-210, 2 x 250-201T tool holder.
Check Stock