Reviews Quality Low Carbon Steel

Single Tab Weld Nut with Target - Spot Weld Nuts #8-32 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (50)

  • C1010 High-Welding Quality, Low Carbon Steel, C1010 High-Welding Quality, Low Carbon Steel.
  • Compare to Buckeye Fasteners SKU: ND 3324.
  • Compare to Paulin Industries Part #: 08-3324.
Check Stock

15' Long hand forged Damascus steel Eagle Kukri Knife, 10 inch long full tang blade, Bull horn scale with steel bolster, Cow hide Leather sheath with belt loop

  • 15" Long hand forged Damascus steel full tang blade Eagle Kukri Knife. Full tang blade goes through all the handle as well in a single piece so full tang blades are durable and stronger than non full tang blades.
  • Natural Bull horn scale with steel bolster. Handle Length is 5 inches with inserting hole. Up to standard Eagle Kukri Knife Comes with a fine quality extra thick and robust leather sheath.
  • Up to standard Eagle Kukri Knife comes with a fine quality extra thick and robust leather sheath that has belt inserting loop..
  • Approximately 6 mm Thick Twist pattern Damascus steel. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel . The sheath has belt inserting loop and can be worn on belt.
  • Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

15" Long hand forged Damascus steel Hunting Bowie Knife, 2 tone Black Dollar wood with Brass finger guard, Cow Hide Leather sheath with belt loop

  • Overall 15" Long Bowie knife. 9.5" long blade Hand forged Damascus steel blade with 9 Inches cutting edge..
  • 5.5" long Black 2 tone Dollar wood with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Ladder pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

16" Long hand forged Damascus steel Hunting Bowie Knife, Bull horn and wood scale with Brass finger guard & Pommel, Cow Hide Leather sheath with belt loop

  • Overall 16" Long Bowie knife. 10.5" long blade Hand forged Damascus steel blade with 9.5 Inches cutting edge..
  • 5.5" long Black Horn and wood scale with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Twist pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

Bobco Metals Hot Rolled Steel Base Plate A36 6\ X 6\ - 4 Holes 1/2\ Diameter - Rounded Corners - 1/4\ Thick - 8 pcs

  • 1095 blade steel specifications: 1.57 inches wide * 12 inches long * 0.16 inches thick,Weight: 0.8 lb * 3.
  • Create your own custom knife that will last a lifetime. Made from high carbon steel, this AbbottoKaylan knife billet sharpens easily, resists chipping, and holds a great edge..
  • 1095 spring steel is a kind of high carbon steel, which has the characteristics of heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc..
  • The highest quality of high carbon steel is 1095, which has a carbon content of 1.03%. After heat treatment, it can reach the hardness of HRc58-60. The toughness is very good, but it is not rust resistant. Large-scale felling knives and military knives such as the American "KA-BAR" army knives during World War II used 1095 as the blade material..
Check Stock

Gun Brushes 12 Piece Gun Cleaning Kits Includes Double-Ended Brush Cleaning Picks Cleaning Patches 6 Inch Cotton Swabs and 20ML Oiler

  • 【100 Pcs Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..
  • 【50 Pieces cleaning patches 2.95X2.95 inches 7.5X7.5cm】Quality cotton patches for cleaning your gun.Can be used in combination with picks, copper tips, etc.Great for holding solvents and moving out fouling.
  • Do a good job of soaking up carbon fouling, dirt, grime, left-over lubricant, etc..
  • 【20ML/0.67OZ Spiked Empty Oil Can】Easy to squeeze. The precision tip is made of rust-proof metal, and the small tip cover can well prevent the liquid from drying up..
  • 【Double-sided Two-color Cleaning Cloth】Cotton flannel cloth, High quality cotton blend, low pile.which can clean the surface of the gun..
  • 【High Quality Low Price】This gun brush set is very practical and inexpensive, and it's packaged in a clear zipper bag so you can carry it around in a backpack or tool box..
Check Stock

BRONSON SPEED CO. G3 Skateboard Bearings - Set of 8

  • IMPACT RESISTANCE, NOT FALLING APART, STRONG RELIABILITY: The material of this skateboard bearing is high carbon chromium bearing steel, which is harder and tougher than carbon steel..
  • GOOD SEALING PERFORMANCE: This skateboard bearing uses RS structure sealing ring, which is better than ZZ structure sealing ring, and has a smaller friction coefficient and smoother than RZ structure sealing ring. It can be used in all kinds of bad weather..
  • SMOOTH AND QUIET: This skateboard bearing uses high-quality lubrication, the sound is small and smoother, and the experience is good..
  • HIGH QUALITY: This skateboard bearing has high processing accuracy, which fully meets the requirements of the use of scooters, and can be used on tools or instruments that require high speed and low noise. For example: vacuum cleaner, fingertip spinning top, etc..
  • LONG SERVICE LIFE: This skateboard bearing has better wear resistance and longer service life than the bearing made of carbon steel..
Check Stock

World Points 1027 Rose Wood Damascus Kitchen Knife Set Professional 6 Piece, Handmade Damascus Steel Chef Knife Set with Chopper/Cleaver And 6 Pocket Original Leather Roll Bag, WP-1027

  • these blades consists of layers of low carbon and high carbon (1095 and 15N20) mixture welded.
  • The High Grade Damascus steel used for these blades consists of layers of low carbon and high carbon (1095 and 15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife..
  • How to care for your new knives: - Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. - After use, wash and dry the blade and apply vegetable oil, or any food safe lubricating oil..
Check Stock

8 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife with 3 Pin Hole & an Inserting Hole Space 4 inches Cutting Edge

  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Overall 8 inches Long hand forged full tang Damascus steel blank blade.
  • 4 inches long cutting edge. Up to standard skinning and Hunting Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Andis Part T-outliner 040710 Cover Screws 04023 2 Screws

  • CARBON-STEEL BLADES: The high-quality carbon-steel blades are precisely toughened for long-lasting cutting. The ideal trimmer will assist you in....
  • LOW NOISE MOTOR: Outstanding machine driving components for professional-grade shaving at home or in the salon, with low noise heavy rotary motor, and....
  • CORD/CORDLESS: It is small and lightweight for greater versatility, you can enjoy consistent power with or without a wire, and you may use this....
  • RECHARGEABLE BATTERY: These electric trimmers have powerful rechargeable lithium-ion batteries that can run for up to 2 hours on a 90-minute charge.
  • What’s Included : Blade Brush, Blade Guard, Dual Voltage Charger.
Check Stock

Replacement Case Screws for Andis T-Outliner 5 Pairs

  • CARBON-STEEL BLADES: The high-quality carbon-steel blades are precisely toughened for long-lasting cutting. The ideal trimmer will assist you in....
  • LOW NOISE MOTOR: Outstanding machine driving components for professional-grade shaving at home or in the salon, with low noise heavy rotary motor, and....
  • CORD/CORDLESS: It is small and lightweight for greater versatility, you can enjoy consistent power with or without a wire, and you may use this....
  • RECHARGEABLE BATTERY: These electric trimmers have powerful rechargeable lithium-ion batteries that can run for up to 2 hours on a 90-minute charge.
  • What’s Included : Blade Brush, Blade Guard, Dual Voltage Charger.
Check Stock

Handmade Double Head Berserker Axe, Large Norse Axe, Hand Forged Steel Axe,Double Blade Axe, Forest Axes Hewing Axe Broad Axe Hunting Axe Dane Axe

  • All of our knives-Swords-Axe are 100% handcrafted. True quality material used to form the blade. The handle materials, blade steels, and leather sheaths are made professionally with no expense spared. Great handle fitting, exception sharp edge, nicely balanced grasp''.
  • Carbon Steel are ferrous alloys based on Iron, Carbon and small level of other alloying elements such as -Manganese or Aluminum. Carbon Steel include soft, non-harden able low carbon or mild Steels such as 1020 as well as harden able high carbon steel such as 1095. Steel alloys are used in a wide variety of Applications in almost every Industrial Segment..
  • We work professionally by mean of a handmade axe. also comes with leather sheath and hold perfect edges thanks!!!.
  • Head width 8.5inches Approx. Average weight without sheath 4000 Gram Approx. Life time Warranty on Manufacturers defect..
Check Stock

AULAKNIV Collect Customized Full Tang Fixed Blade D2 Steel Perfect Tactical Design 12.5" Bowie Knives Tactical,Hunting,Survival,Camping Tools W/Leather Sheath

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock