Reviews Qrp Radio Kitss

XIEGU G1M Portable QRP HF Transceiver SDR Transceiver Four Bands SSB CW AM Mode 5 Watt

  • [Mini 5 Watt QRP Transceiver] Receiving capability 0.5-30 MHz general coverage and transmitting capabilities on four most popular amateur radio bands, the G1M is a highly portable QRP transceiver and has a clear and bright OLED screen..
Check Stock

8 Band Radio Transceiver LCD SDR Full Mode HF SSB QRP Transceiver Shortwave QRP SSB CW with BNC Antenna Connector Support USB LSB CW AM FM (no Power)

  • RADIO TRANSCEIVER-- Shortwave QRP SSB CW radio transceiver, with clear LCD display, support connection to computer, use FT8, JS8, FT4 and other mode software to control digital..
  • REASONABLE DESIGN-- Headphone and power button and microphone jack are on the front panel for easy connection of headphone and power button, with larger touch area and more comfortable key experience..
  • WITH SPEAKER-- Upgraded built in speaker effect, stable sound and less interference, fast change of QRP CW frequency, and support CW side volume adjustment..
  • HIGH EFFICIENCY-- The transceiver has an 8 band design, covering 80m, 60m, 40m, 30m, 20m, 17m, 15m and 10m frequency, which has high transmission efficiency..
  • OTHER FUNCTIONS-- This radio transceiver has multiple interfaces, with built in speaker with cavity and BNC antenna interface, and all LPF parts use 100v c0g/np0 capacitors..
Check Stock

I'm Radio-Active With Tower Antenna Funny Ham Radio T-Shirt

  • I'm Radio-Active Funny Ham Radio Design With Tower Antenna.
  • Are you a ham radio operator? Love all of amateur radio - a good ragchew, CW, QRP, DX / DXing, contests, HF / VHF/ UHF or other frequency, digital radio and digital modes? Have your own rig, maybe even a nice tower or antenna? Great ham radio gift!.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Tecsun H501 Digital Worldband AM/FM Shortwave Longwave Radio with SSB Reception, Dual Speakers, & MP3 Player, Matte Black

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

JUNSHUNTONG HF VFO for Ham SDR QRP Transceiver,20K-220MHz RF Generator Superheterodyne Receiver Debugger,Tcxo Clock,S-Meter, 20 Band presets

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

1-30 MHZ Manual Antenna Tuner kit for HAM Radio QRP DIY Kit

  • This antenna tune kit comes with the standing wave directions..
  • Using a T-type topology network, shortwave 1-30MHz..
  • Can withstand the transmit power of 15W..
  • The tuning range of approximately 30-300 ohms..
  • Very convenient for QRP communication, to ensure high efficiency radio transceiver in communication, but also allows you to fully enjoy the fun of....
Check Stock

1:1 Mini Balun, Consumer Electronics with Stable Performance for HF Shortwave Antenna for Outdoor QRP Station and Furniture

  • 【High Quality】The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
  • 【Feature】The withstand power of the 1:1 mini balun is 100W SSB, with small size and easy to disassemble, carry and store, can bring you more convenient..
  • 【Application】The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories..
  • 【Product Parameter】The QRP mini balun size is approximately 91 x 36 x 26mm / 3.6 x 1.4 x 1in (including terminals), and the housing size is approximately 61 x 36 x 26mm / 2.4 x 1.4 x 1 inch..
  • 【Quality Assurance】This video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check Stock

Mini Balun Consumer Electronics Suitable for HF Shortwave Antenna for Outdoor QRP Station and Furniture (1:9)

  • CHARACTERISTIC: The withstand power of the mini balun is 100W SSB, smoothly operation and good performance, with small size and easy to disassemble, carry and store..
  • PRACTICAL: The QRP mini balun is a bidirectional balanced to unbalanced converter, very practical, can be used for unbalanced output of sound reinforcement level audio equipment, etc..
  • HIGH QUALITY: The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
  • WIDE USE: The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories. For long‑term outdoor use, the upper and lower covers of the shell must be bonded and sealed with silica gel..
  • QUALITY ASSURANCE: The video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check Stock

SDR Transceiver Radio Receiver HF QRP 8 Band SSB CW Shortwave Radio Receiver Transmitter Aluminium Alloy for DIY Radio Communication(US Plug)

  • Reliable Work: A pocket sized 8 band SSB CW QRP transceiver designed with built in lithium battery, built in microphone, PTT button and extremely low RX current consumption, it is a good partner for SOTA, POTA or any other portable activities..
  • Better Design: This QRP SSB CW shortwave transceiver has a large screen, built in battery, charger, built in microphone and speaker. It can be connected to an automatic button. It can also be decode CW coding..
  • IRF Launch Tube: With durable IRF series launch tube, can be used to connect antenna, which is on the instrument base..
  • Simple Structure: All aluminum buttons and translucent silicone buttons, the original transformer qcx circuit is greatly simplified, and the installation components are reduced by 50%. No complicated windings. There is no wiring procedure..
  • High Efficiency: High power efficiency and simple design, thanks to eer electronic level transmitters, also very convenient to carry..
Check Stock

45W HF Power Amplifier For YASEU FT-817 ICOM IC-703 IC-705 Elecraft KX3 QRP Ham

  • hf power amplifier，for QRP transceiver， Improve signal。Can be used both as a base and mobileunit,Extremely Small Compact and lightweight ， Full integration with the FT-817 using the supplied interface cable, The amplifier incorporates various protection circuits such as high VOLTAGE，front mounted LED display..
  • This amplifier can be successfully used with other QRP rigs such as the ICOM IC-703(and Elecraft KX3)..
  • YAESU FT-817ND Quick operating manual: 1. Connect power cord to DC power supplier, Red to "+", Black to" -" 2. Connect ACC cable to FT-817 ACC and amp 3. Adjustment “BAND ADJ” button， Select the band..
  • 4. Connect antenna to amp "ANT" and "input" from FT-817 antenna out. Notice! The antenna you used that should well tuned, the SWR should less than 1:1.5 5. Open the power on both power supplier and AMP. The power indicate on. 6. Power on FT-817, the band indicate on Amp shoule be on..
  • 7. Press PTT, the TX indicate on Amp should be on.Notice! If working on FM or SSTV for long operating time, should lower the output power on FT-817, say 2.5W or 1W..
Check Stock

Emergency Weather Radio with NOAA/AM/FM, Solar Hand Crank Radio with 5000mAh Rechargeable Battery, Survival Portable Radio with LED Flashlight,Battery Operated, SOS Alarm for Home or Emergency(Green)

  • Reliable Work: A pocket sized 8 band SSB CW QRP transceiver designed with built in lithium battery, built in microphone, PTT button and extremely low RX current consumption, it is a good partner for SOTA, POTA or any other portable activities..
  • Better Design: This QRP SSB CW shortwave transceiver has a large screen, built in battery, charger, built in microphone and speaker. It can be connected to an automatic button. It can also be decode CW coding..
  • IRF Launch Tube: With durable IRF series launch tube, can be used to connect antenna, which is on the instrument base..
  • Simple Structure: All aluminum buttons and translucent silicone buttons, the original transformer qcx circuit is greatly simplified, and the installation components are reduced by 50%. No complicated windings. There is no wiring procedure..
  • High Efficiency: High power efficiency and simple design, thanks to eer electronic level transmitters, also very convenient to carry..
Check Stock

Magnus VT-4000 Tripod System with Fluid Head

  • Supports 8.8 lb (4 kg) | 65mm Ball Diameter | 2-Stage Leg Design.
  • Height Adjustment Range - 27.6" to 59" | Middle Spreader | Fixed Counter Balance.
  • Fixed Pan / Tilt Drag | +20/-25mm Slide Range | Lightweight Tripods | With Quick Release Plate.
  • In The Box: VT-QRP400 Quick Release Plate, Carrying Case, Allen Keys (2), Limited 1-Year manufacture Warranty.
Check Stock

Magnus VT-100 Tripod System with 2-Way Pan Head

  • Supports 4.4 lb | 2-Way Pan Head | 3-Section Leg Design.
  • Height Range - 18.6 to 59" | Separate Pan/Tilt Locks | Mid-Level Spreader.
  • Built-In Bubble Level | With Quick-Release Plate | Gear-Driven Center Column.
  • Whats In The Box: VT-QRP10 Quick-Release Plate, Carrying Case With Shoulder Strap, Limited 1-Year Warranty.
Check Stock