Reviews Q235 Welded Steel Pipe

BestEquip Safety Bollard 36-4.5 Safety Barrier Bollard 4-1/2\ OD 36\ Height Yellow Powder Coat Pipe Steel Safety Barrier with 4 Free Anchor Bolts for Traffic-Sensitive Area

  • Welded Steel Construction: This safety bollard is made of Q235 steel features high hardness, great strength, and durability. Tube Thickness: 0.08 in/2 mm. Height: 36 in/91.4cm. Welded and integral structure enables the bollard post to withstand impact..
  • Yellow Finish 4.5" O.D: The steel pipe safety bollard is highly visible and grabs attention due to its bright yellow finish and a black stripe on the top. The powder-coated finish guards the parking bollard against oxidation, UV rays, and fading or rusting. Diameter: 4.5 in/11.4 cm..
  • Stable Base Plate: Our traffic bollard adopts a sealed bottom design, increasing the grounding area. No need to worry about sand or cement oozing out the bottom. Base Size(L x W): 7.9 x 7.9 in/20 x 20 cm, Base Thickness: 0.2 in/5 mm. More stable and durable, not easy to deform..
  • Easy Installation: This guardian steel bollard is easy to install with four pre-drilled mounting holes in the base. It comes with four anchor bolts and a wrench. Assembly requires minimal energy and time..
  • Wide Application: This steel pipe bollard stands vertical to provide increased visibility and protection to entrances, parking lots, sidewalks, bike paths, and more. They are commonly used in traffic-sensitive areas..
Check Stock

VEVOR Safety Bollard 36 Inch Height Bollard Post 5.5 Inch Diameter Steel Pipe Safety Bollard Post Yellow Steel Bollard Steel Safety Bollard with 8 Anchor Bolts Perfect for Traffic-Sensitive Area

  • Security & Solidity: The welded and integral structure enables this safety bollard to withstand impact, releasing you from the harm caused by vehicle collisions, etc. This 36" height safety bollard, with the pipe diameter of 5.5" and pipe thickness of 0.12", is made of Q235 steel, ensuring high hardness, great strength, and durability..
  • High Visibility: This bollard post adopts striking yellow to alert pedestrians and vehicles, both day and night. The yellow and black around the top further increase visibility. Besides, the powder coating can adequately keep the bollard post away from wear and tear and extend its service life without harming the environment..
  • Stable Base Plate: The thickness of the steel bollard’s baseplate is 0.24", which is totally welded to the pipe. Compared with the hollow ones, ours can significantly increase the grounding area and achieve excellent stability..
  • Easy Installation: Installing this steel safety bollard won’t take you much time. All you need to do is to find the right place, drill the holes, tap into the anchor bolts and tighten them. We will provide you with the anchor bolts and wrench without extra fees..
  • Various Application: This safety barrier bollard is suitable for many applications. It will increase visi....
Check Stock

Big Gun Exhaust 07-1122 Eco System Slip-On Exhaust System (Color: Brushed, Material: Aluminum)

  • Economically priced high quality slip-on exhaust system.
  • USFS forestry approved screen type removable spark arrestor Included Tig welded stainless steel pipe construction 6061 Br+AM15u.
Check Stock

MOTOKU Cylinder Intake and Exhaust Valves kit for Honda Sportrax 400EX TRX400X XR400R 1996-2014

  • Economically priced high quality slip-on exhaust system.
  • USFS forestry approved screen type removable spark arrestor Included Tig welded stainless steel pipe construction 6061 Br+AM15u.
Check Stock

APlusLift HW-10KOH 10,000LB Two Post Overhead Auto Hoist Clear Floor Car Lift with Combo (Symmetric and Asymmetric) Arms / 24 Months Parts Warranty

  • Shipping from nearest warehouses to minimize possible freight damages (AL.
  • Combo (Symmetrical and Asymmetrical) Arm Assembly with Screw-in Pads!.
  • CE Certified Lift Structure and Hydraulic System.
  • 6'9" Lift Height Maximum with Truck Adapters.
  • Carriage Material Q355 Stronger Than Normal Q235 Steel.
Check Stock

APlusLift HW-10KBP 10,000LB Two Post Floor Plate Auto Hoist Car Lift with Combo (Symmetric and Asymmetric) Arms / 24 Months Parts Warranty

  • Improved design from APlusLift HW-10KBP model.
  • Shipping from nearest warehouses to minimize possible freight damages (AL.
  • Combo (Symmetrical and Asymmetrical) Arm Assembly with Screw-in Pads!.
  • CE Certified Lift Structure and Hydraulic System.
  • 6'9" Lift Height Maximum with Truck Adapters.
  • Carriage Material Q355 Stronger Than Normal Q235 Steel.
Check Stock

APlusLift HW-10KOH-A 10000LB Two Post Overhead Clear Floor Car Lift Auto Hoist with Combo (Symmetric and Asymmetric) Arms / 24 Months Parts Warranty

  • Shipping from nearest warehouses to minimize possible freight damages (AL.
  • Combo (Symmetrical and Asymmetrical) Arm Assembly with Screw-in Pads!.
  • CE Certified Lift Structure and Hydraulic System.
  • 6'9" Lift Height Maximum with Truck Adapters.
  • Carriage Material Q355 Stronger Than Normal Q235 Steel.
Check Stock

YOST Vises 750-DI Multi-Jaw Rotating Combination Bench & Pipe Vise with Swivel Base

  • Extreme-Duty Casting Clamp force: 13,400 lbs. and Torque rating: 316 Ft-Lb.
  • Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises.
  • Jaw Width: 5" (12.7CM) x Jaw Opening: 5" (12.7CM) x Throat Depth: 4" (10.2CM) x Pipe Capacity: 0.125”D x 3.5"D (0.32CM x 8.9CM).
  • Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface.
  • 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.No-pinch main screw handle.
  • Machined Q235 steel main screw 0. 75"D with rolled single acme threads at 4 threads per inch.
  • Replaceable Hardened Steel Serrated (Top) Jaws and EXCLUSIVE SELF-ALIGNING Pipe Jaws.
  • 0.51"D x 9. 5" (1.3CM x 24.1CM) Long handle with rubber bumpers.
  • Base mounting tabs: (4) x 9/16"D (14MM), mounting hardware not included..
Check Stock

APlusLift HW-10KBP-A 10,000LB Two Post Floor Plate Auto Hoist Car Lift with Combo (Symmetric and Asymmetric) Arms / 24 Months Parts Warranty

  • Improved design from APlusLift HW-10KBP model.
  • Shipping from nearest warehouses to minimize possible freight damages (AL.
  • Combo (Symmetrical and Asymmetrical) Arm Assembly with Screw-in Pads!.
  • CE Certified Lift Structure and Hydraulic System.
  • 6'9" Lift Height Maximum with Truck Adapters.
  • Carriage Material Q355 Stronger Than Normal Q235 Steel.
Check Stock

Top Notch Parts Replacement Big Bore Cylinder Complete Head Polished Ports Performance Camshaft For 99 00 01 02 03 04 05 06 07 08 Honda Trx400ex TRX 400ex 440cc

  • Economically priced high quality slip-on exhaust system.
  • USFS forestry approved screen type removable spark arrestor Included Tig welded stainless steel pipe construction 6061 Br+AM15u.
Check Stock

DNA Motoring FXP-FESC01 Flex Pipe Connector [For 03-08 Ford Escape 3.0L V6]

  • Made of high quality T-304 stainless steel with flex.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • Slips over factory exhaust pipe to be clamped or welded to repair broken flex section.
  • 2"diameter 2-bolt inlet to 2. 125" factory sized pipe outlet.
Check Stock

4" U Bolt Saddle Exhaust Clamp - Zinc Plated Flat Band

  • 4 inch U bolt Clamp with Welded Saddle is made in Zinc-Plated Steel.
  • This double-edge Clamp provides superior strength and sealing-ability, Zinc plated for corrosion resistance provides longer life.
  • Heavy duty welded saddle design for extra strength and Flat band for 360-degree seal.
  • Flat Band prohibiting pipe distortion and damaged, better protect pipe ends.
  • Tested to the highest heavy duty standards to having equal performance with OE brand in durability, safety and reliability.
Check Stock

Custom Threaded Exhaust Adaptor Flange Kit Diy Generator Fits HONDA GX390

  • Heavy duty threaded exhaust flange kit for use on Honda GX390 engines. This is an un welded DIY kit so you can choose the length of the threaded pipe to work best for your application. Great for custom exhaust setups on generators, go karts, mini bikes, or garden equipment. Flange is CNC cut from heavy 1/4" steel plate to prevent warping, outlet pipe is 1" NPT pipe thread that matches exhaust port perfectly for maximum flow. Length of outlet pipe piece is 2.5"..
  • Comes complete with stainless steel mounting hardware for a quality installation..
Check Stock