Reviews Pvc Fiber reinforced Hose Production

VEVOR Discharge Hose, 1-1/2' x 105', PVC Fabric Lay Flat Hose, Heavy Duty Backwash Drain Hose with Clamps, Weather-proof & Burst-proof, Ideal for Swimming Pool & Water Transfer, Blue

  • Heavy-Duty PVC Construction: The discharge hose is made of 0.06 in/1.5 mm thick reinforced PVC fiber, circularly braided, durable, and corrosion-proof, which can serve you for a long time without leakage..
  • Discharge Hose Sizes: Hose Inside Diameter: 1-1/2"/38 mm.
  • Length: 105 ft/32m. Be sure to measure your equipment outlet to ensure proper fit before ordering. It must be 1.5 in or less.
  • Weather-Proof & Burst-Proof: Our backwash drain hose adopts high-strength PVC fiber, explosion-proof and, can withstand harsh weathers. Working pressure: 60 psi.
  • Temperature range: 5°F to 149°F (-15°C to 65°C)..
  • Easy Installation & Use: Our lay flat hose comes with 2 clamps that can be used to connect the hose and pipe. In addition, you can roll the hose up and store it in a dry and shady place after use, compact and portable..
  • Wide Applications: The heavy-duty backwash hose, due to its excellent quality and portability, is widely used for draining swimming pool, filter clean-out, fluid pumping, and draining for industry farm irrigation, quarry, mining, and construction applications, etc..
Check Stock

POOLWHALE Heavy Duty 1-1/2" x 100' Thick 1.2mm Black Backwash Pool Hose with Clamp - Flat Water Discharge Hose - Chemical and Weather Resistant - Drain Clean Swimming Pools & Filters

  • 1.2mm thick discharge hose 1-1/2 inch (38mm) diameter by 100 foot (30.4m) long swimming pool backwash hose with metal hose clamp.
  • Heavy-duty tough hose that's the weather, chemical, and burst resistant reinforced commercial grade PVC hose that is custom made for swimming pools.
  • Built with high tensile strength braided polyester fiber that's circularly woven to provide extra reinforcement from bursting.
  • Pool backwash hose can easily connect to the pump, Rolls up for easy storage when not in use, and stored in a dry place out of direct sunlight for next time,Holds up to extreme weather conditions..
  • Ideal for In-ground and above-ground pool equipment. It not only can be used as a household drain hose but also sump pump discharge hose, trash pump discharge hose for mine, factory, agriculture, and architectural engineering.
Check Stock

Hi-Tech Duravent - 3580300000260 Super Vac-U-Flex Series PVC Vacuum Duct Hose, Grey, 3\ ID, 3-1/2\ OD, 25' Length

  • Hose for material handling, vacuum and suction, or exhaust and ventilation applications.
  • Hose made of PVC with fiber reinforcement for resistance to moisture, ozone, and oil.
  • Coated spring steel wire helix reinforcement for strength and resistance to crushing.
  • Temperature range of -20 to +150 degrees F (-29 to +66 degrees C).
  • Can be used with a variety of coupling options (not included).
Check Stock

DAVCO 3/4' ID × 1' OD - 25 ft Clear Braided Plastic Vinyl Tubing Flexible High Pressure Reinforced PVC Hose

  • ...ubing is used for a wide range of low to high-pressure applications such as delivery water, gas, air, oil, fuel, ideal for your multi-purpose needs from landscape water line to automation machinery and pneumatic lines..
  • [Experienced and professional]. DAVCO is a professional brand that is committed to the water hose production industry. For the past 10 years, our products have been sold all over the world, and countless families have used or products as their solution..
Check Stock

Blue Devil 75-Foot Backwash Hose for Pool with Hose Clamp, 2" W x 75' L

  • The PVC tube and the cover of the hose are extruded simultaneously to ensure maximum bonding and high quality..
  • Manufactured with a continuous high tensile strength polyester fiber circularly woven to provide reinforcement.
  • Formulated with UV Protectors, Working Temperatures - 5 degrees F to 149 degrees F.
  • This hose is very strong, yet relatively lightweight and it resists twisting and kinking..
  • Lay Flat Discharge Hose is resistant to grease, oil and many chemicals and acids..
Check Stock

2-1/2 x 10' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!

  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose..
  • Super flexible hose for maneuvering around all your shop machinery.
  • Clear Vue to see any type of obstruction.
  • Ideal for sawdust collection and other general shop applications.
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type A included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • [HIGH QUALITY]: Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 2" Female Type C Coupler x 2" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • [SIZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE A FITTINGS]: The item include a type A (male adapter x female NPT threaded ) cam and groove hose fitting, you can directly screw onto pump male threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand fil....
Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type F included, Heavy Duty Reinforced Pump Backwash Hose Assembly

  • [HIGH QUALITY]: Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 2" Female Type C Coupler x 2" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • [SIZE]: Backwash pump hose, standard 2 inch diameter, Flat width 3.4 inch.
  • 2 in Aluminum cam lock fittings type C, type E and extra TYPE F adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • [TYPE F FITTINGS]: The item include a type F (male adapter x male NPT threaded ) cam and groove hose fitting, you can directly screw onto pump female threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
  • [NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • [WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand fil....
Check Stock

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

  • 003c/b003e[HIGH QUALITY]:003c/b003e Pump Discharge hose is made of PVC material reinforced with high tensile strength polyester yarn, 3" Female Type C Coupler x 3" Male Type E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • 003c/b003e[SIZE]:003c/b003e Backwash pump hose, standard 3 inch diameter, Flat width 4.85 inch.
  • 3 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • 003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • 003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
Check Stock

4\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose..
Check Stock

4 x 50’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose..
Check Stock

4 x 20’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose..
Check Stock

2.5\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose..
Check Stock