Reviews Pv Charge Controller

BougeRV Solar Panel Starter Kit 200 Watt, 9BB Mono Cells with 30A 12V/24V PWM Negative Ground Solar Controller, Solar Cables, and Mounting Z-Brackets for Camping and Off-Grid (100W*2)

  • One Purchase For Your Project. Totally 200 watts system, a one-stop installation kit contains 2 pieces of 100-watt solar panels, 1 of 20FT/10AWG solar to controller cable, 1 pair of 14-10AWG M/FF and F/MM Y connectors, 1 pair of 8FT/10AWG controller to battery cable, and 1 set of 8 units mounting z brackets..
  • 1-on-1 Solar Solution by BougeRV Tech Support & Warranty. BougeRV promises an 18-month product warranty & 25-years power warranty and a lifelong friendly service for you. Please contact us whenever you have any problem with BougeRV solar panel. We will provide you with a professional guide to building a solar system..
  • 9BB Cell Design. More Busbar, More Power. BougeRV 100W solar panel uses the high-level 9BB cell design, which has a 22.8% highest conversion rate. Increase the receptive surface of the cell.
  • a narrower ribbon decreases the covered area by 22%. It can charge a 12V or 24/48V battery by connecting several solar panels in series..
  • Negative Ground PWM Controller. BougeRV new version PWM charge controller has a negative ground design, allowing it to be compatible with more vehicle systems without worryi....
Check Stock

Victron Energy SmartSolar MPPT 100V 30 amp 12/24-Volt Solar Charge Controller Bluetooth

  • SmartSolar MPPT 100-Volt 30 amp: A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest....
  • The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0....
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every....
  • Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by....
Check Stock

60 amp MPPT Charge Controller 12V/24V/36V/48V, Solar Charge Controller mppt Max 160VDC Input LCD Backlight Solar Charge for Sealed Gel AGM Lithium Battery

  • 60A MPPT Charge controllelr, 100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller..
  • Fit for 12V/24V/36V/48V battery, USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Flooded/Sealed/Gel battery, User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer..
  • Built-in cooling fan, Fan will ON when temperature 003e45℃ and off 003c 40℃,Porous heat dissipation and fan use BEARING technologies increase life UP TO 5000hrs in normal use..
  • Very detail display with Blacklight---LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters..
Check Stock

EPEVER MPPT Charge Controller 40A 12V/24V Upgrade Tracer4210AN + Remote Meter MT50 Monitor + RTS for Solar Panel Charge Controller Regulator with LCD Display (Tracer4210AN + MT50+RTS)

  • EPEVER 40A MPPT Solar Charge Controller + MT50 Remote Meter + Temp Sensor Cable RTS300R47K3.81A . 40Amp Controller 12V/24V Auto Work , Max. PV input power:520W @12V battery or 1040W @24V battery. Max PV 100V. Common Negative grounding , Compatible with lead-acid and lithium-ion batteries..
  • 40Amp MPPT Charge Controller Tracking efficiency : ≥99.5%, Max. conversion efficiency 98% ,12V/24V Automatic Work System Voltage Recognition Auto-saving function: two voltage disconnect levels ,Charging power and current limitation function..
  • Support Lead-acid: Sealed (default)/ Gel/ AGM/ Flooded / User (9～17V@12V.
  • 18～34V@ 24V) & Lithium: LiFePO4 (4s/12V.
  • 6s/24V), User (9～34V) & User-defined.Battery temperature compensation function（only for Lead-acid battery) , Overheating power reduction function.
  • MT50 Remote Meter Automatic identify the controller, and display relevant parameter data , Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control . RTS Temp sensor acquisition of battery(or controller) temperature for undertaking temperature compensation of control parameters,.
  • 2022 Upgraded version support choose Lithium types by controller buttons directly . You could also contact with vendor(....
Check Stock

Victron Energy BlueSolar MPPT 75V 15 amp 12/24-Volt Solar Charge Controller

  • Victron Energy BlueSolar MPPT 75-Volt 15 amp Solar Charge Controller maintains battery health, extending its life.
  • A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Remotely control and monitor the extensive features of your BlueSolar MPPT solar charge controller by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours(30A)

  • ☀【Dual USB】: This 30a solar charger controller compatibility with 12V 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization, Float), the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • ☀【LCD Display 】: Backlight LCD display PV/Battery/Load charge and discharge parameter. Adjustable Floating voltage/LVD/LVR/Load Timer for this charge controller according to needs.ADD Feature: Charge and Discharge Current, cumulative power generation and discharge power query.
  • ☀【Lead-acid Batteries】: Solar Charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • ☀【PWM Charge Controller Protection】:Dual MOSFET Reverse current /overheat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial, commercial etc.
  • ☀【Easy to Install and Operate】: The charge controller should connect the battery first, then the solar panel, an....
Check Stock

weideer 4 String PV Combiner Box and 20A Solar Charger Controller 12V/24V Adjustable LCD Display for Solar Panel System

  • Product name:4 String PV Combiner Box with 3 Digit Combination Lock Mounting Plate(The current and voltage of each pin of the combiner box is up to 15A/250V DC.12V system up to 720W, 24V system up to 1440W, 48V system up to 2880W.) Product configuration:10Awg Cables.
  • 32A Fuse Holder Base.The fuse base has an LED indicator, if the fuse is burned out, the LED will light up.
  • 63A 2 Pole Miniature Circuit Breaker.Play the role of circuit protection and lightning protect.
  • Controller size:32.29mm*101.94mm*122mm/1.27in*4in* 4.8in.
  • Max.pv input power:260W(12V)520W(24V) Build-in industrial micro controller.
  • Large-screen LCD display/charging and discharging current display/cumulative power generation and discharge power query/ temperature display/light control + delay control/adjustable charge and discharge parameters, with power-off memory and other functions. Dual USB output, the maximum current of 2.5A.
Check Stock

EpRec 30A 12V 24V PWM Solar Charge Controller Compatible with Lead Acid/ Lithium-ion/ Lithium Iron Phosphate Battery

  • 【Upgraded Solar Panel Controller】This 30a solar charge controller compatibility with 12V 24V system.Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float),the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • 【LCD Display】Backlight LCD display PV/Battery/Load charge and discharge parameter.Dual USB can give your electronic product max 5V 2.5A..
  • 【Intelligent Control】This solar controller fit for lithium-ion/ lithium iron phosphate /Lead-acid batteries(OPEN,AGM,GEL,) with mutiple load timer(Load should be DC).It has a wide range of applicability and automatically identifies daytime/night.For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
  • 【Safe to Use】PWM charge controller Protection:Dual MOSFET Reverse current /over heat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial,commercial etc..
  • 【Customer First】12 months honor warranty from EpRec and 24hrs after service.Your satisfaction is our priority..
Check Stock

Victron Energy SmartSolar MPPT 100V 50 amp 12/24-Volt Solar Charge Controller (Bluetooth)

  • SmartSolar MPPT 100-Volt 50 amp: A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
  • The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

Victron Energy SmartSolar MPPT 150V 35 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

  • SmartSolar MPPT 150-Volt 35 amp, Battery Voltage: 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
  • The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

Victron Energy SmartSolar MPPT Tr 250V 100 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

  • SmartSolar MPPT Tr 250-Volt 100 amp, Battery Voltage: 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
  • The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

Victron Energy SmartSolar MPPT TR VE.Can 250V 100 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

  • SmartSolar MPPT Tr VE Can 250-Volt 100 amp, Battery Voltage: 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from solar panels, and stores it in batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
  • The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto - Max 160VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium Battery【Software Update Version】(MPPT-60A)

  • ❶【Software Update Version】100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller..
  • ❷Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery.User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording..
  • ❸Blacklight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters..
  • ❹Intelligence Fan-on temperature 003e45℃ and off 003c 40℃,Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use..
  • ❺【What You Get】we consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors. copper wires:9....
Check Stock