Reviews Push pull Series Connectors

3M Scotchlok Moisture Guard Weatherproof, UV-Resistant Connector for 2-3 Wires, 16-14 AWG (solid/stranded), 25 per bag

  • 【Safe and Reliable】Rated Voltage: 250V/4KV.
  • Rated Current: 32A. Glutoad lever wire connectors selected high quality flame-retardant insulating material, no corrosion, anti-aging, resistance high temperature, against electrical shock and long service life. Internal shrapnel copper material, and better conductive properties..
  • 【Time and Effort Saving】Glutoad lever electrical connectors can quickly connect and disconnect wires. If you want to replace wires, only need to pull up the orange levers, pull out the unneeded wires and replace them. There is a test hole in every Glutoad electrical wire connector surface, it can be used to check whether the wires have electricity or not..
  • 【Space Saving】Glutoad lever terminal connectors are compact, simple, reliable and reusable. When you combine the wires, you don't need to worry about twisting between the wires..
  • 【Easy to Use】First, strip the wire according to 0.35-0.47inch, then push the orange lever up to 90° and push in the wires, last push the lever down. When the wire is inserted into the Glutoad wire splice connector and locked, the wires will not come loose..
  • 【Widely Used】Glutoad wiring connectors kit can meet your different demands because they have 3 different conductors (2 3 5 Port). T....
Check Stock

UTMALL Electrical Service Tool Connector Removal Tool for VAG VW Audi Porsche

  • For the removal for VAG / Porsche connectors.
  • Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
  • Fits directly onto the push and pull connectors.
Check Stock

Razor E100 Scooter 24 Volt Controller - with 7 Connectors for Razor E100 and E125 (Versions 10+), E150 (Versions 1+), E175 (Versions 18+) Razor Part #W13111612015

  • ► Razor Factory Original Replacement 24 Volt Control Module with 7 connectors and 4 pin throttle connector.
  • ► COMPATIBLE ONLY WITH: Razor E100 - E125 Versions 10 and up, E150 Version 1 and up, and E175 Version 18 and above.
  • ► VERSION SPECIFIC CONTROLLER: This Control Module has 7 connectors (5 plastic connectors & 2 metal connectors)..
  • ► IMPORTANT INSTALLATION INFORMATION: The E100 Series Razor Scooter is a PUSH START Scooter. You need to Push the Scooter, Twist the Throttle and then the Motor will Engage.
  • ► IMPORTANT PRODUCT INFORMATION: Your E100 / E125 / E150 / E175 Version is determined based on your 8-digit Product Serial ID code. The Serial Number can be found below the Barcode on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"= version 1, "02"= version 2, etc.).
Check Stock

Lisle 13120 Electrical Connector Separator

  • Quickly Disconnects Electrical Connectors Without Damage.
  • Engage the tool tip behind the connector clip.
  • The tool is double-ended to fit different access angles.
  • Works on Weather Pack and other automotive electrical connectors.
Check Stock

HALO Air tite Housing Remodel 5\

  • Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
  • Insulation contact rated: Designed for insulated ceilings where contact is necessary.
  • Air-Tite rated design meets restricted air flow code requirements which prevents airflow between attic and living areas and saves on both heating and air conditioning costs.
  • Exclusive remodel speed clamps securely lock from 3/8 in. to 2 in. ceilings eliminating the struggle often experienced with recessed housing clips.
  • Compatible with a wide variety of 5 inch Recessed light trims but is best with Halo 5071, 5070, 5054, 5051, 5021, 5020, 5016, 5001, 5000 series models.
  • Compatible with a wide variety of 5 inch LED retrofit trims but is best with Halo quality RL, RA, SLD, LT, SMD, and ML series models (Bulb free with some having a 45 year LED lifespan).
  • Slide-N-Side Junction Box: connectors allow non-metallic sheathed cable for both U.S. and Canada to be installed without tools.
  • High performance E26 Series 5 inch trim options available.
  • Socket bracket adjusts lamp to various trim styles and designs.
  • Three Quick Connect connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
Check Stock

338 pcs DT Deustch Connector Kit,2 3 4 6 8 12 Pin Connectors, Crimping Tool(12-20AWG), DT Connector Removal Tool , Size 16 Solid Terminal Contacts(14-20AWG), Waterproof Automotive Electrical Connector

  • 【Widely Applied 】Include genuine 338pcs DT series 2 3 4 6 8 12 pin electrical connector components, widely applied in Construction, Truck, Bus, Off-highway, Agriculture, Mining, Emergency Vehicles, Forestry, Recreational Marine, Motorcycle etc..
  • 【Deutsch Connectors】all DT connectors are made of Flame Retardant Nylon(PA66),Waterproof and dustproof, durable, safe installation..
  • 【16# connects】 100 pairs, total 200 pieces, Male Pins 0460-215-16141/Female Sockets 0462-209-16141 . Solid Contacts Wire Gauge 14-20 AWG. Solid terminals have strong stability and conductivity, easy to crimping with wire and installing into connector..
  • 【Professional Crimper】4-way indent crimping tool，smooth precision ratchet ensures the same accurate crimps every time, wire size 12-20AWG..
  • 【Wedge Lock Removal Tool】Multi-use tool : a small hook on one end to remove the wedge lock, and a small screwdriver on the other end to push back the locking fingers and release the contact on several Deutsch series connectors such as: DT, DTM, DTP, DTP, DRB, DTV and STRIKE Series.
Check Stock

TOPENS MK01 Mounting Hardware Fasteners Bracket Release Key Set for TOPENS Swing Gate Opener Replacement

  • The brackets and hardware included are used for the TOPENS A3/A5/A8 series swing gate openers. One set is for one actuator, and two sets are for the AD/PW/AT/KD series dual swing gate openers. One release key included is used for the A/AD/PW/KD702 series swing gate openers, and another release key is for KD902/AT series swing gate openers and RK700/CK700 DSR/DK series sliding gate opener..
  • Including 1 x PSO Part (Used in Push-to-Open Installation Mode for Opening Outwards), 1 x Post Pivot Bracket (Used in Pull-to-Open Installation Mode for Opening Inwards), 2 x Post Bracket, 1 x Gate Bracket, bolts, pins, nuts etc. for TOPENS swing gate openers..
  • The galvanized steel bracket set is used to connect the arm of the TOPENS Swing Gate Opener to the gate post..
  • Pull/Push-to-open gate bracket allows the arm (actuator) to open into/away from the property, easy DIY installation..
  • 【Outstanding Customer Service】- Backed by a 12-month TOPENS Warranty, and free product return & exchange service within 30 days. Our complimentary TopensCare+ Customer Support provides you comprehensive system solutions. Simply contact us via our service Email for any concerns during product installation and use. We are quite sure that you will be super-impressed with HIGH QUALITY of....
Check Stock

Kwikset Juno Half-Dummy Door Knob with Microban Antimicrobial Protection in Satin Nickel - 97880-668

  • Satin nickel Juno door knob can be used on interior doors where a push/pull door handle function is required.
  • Single dummy/inactive door knob for use on interior doors where only a push/pull function is required.
  • Kwikset dummy knob easily installs in minutes with just a screwdriver.
  • Kwikset door hardware products come with a lifetime mechanical and finish warranty.
  • Kwikset hardware with Microban product protection stops microbes at the door keeping hardware 99. 9% cleaner than unprotected surfaces.
  • For use on interior doors where a push/pull function is required.
  • Installs in minutes with just a screwdriver.
  • Kwikset knobs are available in multiple styles and finishes.
Check Stock

Kwikset 97880-667 Juno Half-Dummy Door Knob with Microban Antimicrobial Protection in Antique Brass

  • Antique brass Juno door knob can be used on interior doors where a push/pull door handle function is required.
  • Single dummy/inactive door knob for use on interior doors where only a push/pull function is required.
  • Kwikset dummy knob easily installs in minutes with just a screwdriver.
  • Kwikset door hardware products come with a lifetime mechanical and finish warranty.
  • Kwikset hardware with Microban product protection stops microbes at the door keeping hardware 99. 9% cleaner than unprotected surfaces.
  • For use on interior doors where a push/pull function is required.
  • Installs in minutes with just a screwdriver.
  • Kwikset knobs are available in multiple styles and finishes.
Check Stock

Kwikset Tustin Right-Handed Half-Dummy Lever with Microban Antimicrobial Protection in Venetian Bronze

  • Venetian bronze Tustin door lever can be used on interior doors where a push/pull door handle function is required.
  • Single dummy/inactive door lever for use on interior doors where only a push/pull function is required.
  • Kwikset dummy lever easily installs in minutes with just a screwdriver, this wave lever meets ADA/ANSI A117.1 requirements, ensuring accessibility to all disabled persons.
  • Kwikset door hardware products come with a lifetime mechanical and finish warranty.
  • Kwikset hardware with Microban product protection stops microbes at the door keeping hardware 99. 9% cleaner than unprotected surfaces.
  • For use on interior doors where a push/pull function is required.
  • Installs in minutes with just a screwdriver.
Check Stock

JRready DRK-328 Extraction Tool to remove pin and socket contacts from Multimate connectors (TE 305183)， Inner diameter of brace tube:0.129

  • Applications: The ET-01 removal tool is designed to be used to remove individual Deutsch size 16 solid and stamped and formed pins and socket contacts from front-release connectors (such as DT, DTM, DTP, DTV, DRB, DRCP, and STRIKE* connectors)..
  • Configuration: Multi-use tool with a small hook on one end to remove the wedgelock, and a small screwdriver on the other end to push back the locking fingers and release the contact..
  • Material: Hardened & rust-proof stainless steel body, super handy terminal removal tool for replace or repair worn electrical connections , to let you separate the wires from their terminals without causing damage to either..
  • Deutsch’s DT Series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, rectangular, thermoplastic housing and integrated latch for mating. The DT Series kit features various plugs and receptacles for 2, 3, 4, 6, 8 and 12 cavity arrangements with contact size 16 (13 amps), as well as wedgelocks to assure contact alignment and retention..
  • An alternative for the Deutsch extraction-removal tool DT-RT1..
Check Stock

HALO E27RICAT E26 Series Recessed Lighting Shallow Remodel Insulation Contact Rated Air-Tite Housing, 6\

  • Can be installed from below the ceiling in home remodel applications, ideal for those who have limited or no access to their ceiling.
  • Insulation contact rated: Designed for insulated ceilings where contact is necessary.
  • Shallow recessed can for ceilings with 2 x 6 joist construction, fits perfectly in tight spaces.
  • Exclusive remodel speed clamps securely lock from 3/8 in. to 2 in. ceilings eliminating the struggle often experienced with recessed housing clips.
  • Compatible with a wide variety of 6 inch recessed light trims, but is best with HALO 426, 420, 353, 310, 301, 172, 78, 71, 70, and 30 series models.
  • Compatible with a wide variety of 6 inch LED retrofit trims, but is best with HALO quality RL, RA, SLD, LT, SMD, and ML series models (bulb free with some having a 45 year LED lifespan).
  • High performance E26 Series 6 inch trim options available.
  • Slide-N-Side Junction Box: connectors allow non-metallic sheathed cable for both U. S. and Canada to be installed without tools.
  • Socket bracket adjusts lamp to various trim styles and designs.
  • Three "Quick Connect" connectors eliminate the need for separate wire nuts - simply strip supply wires and push in.
Check Stock

Creative Outdoor Push Pull Collapsible Folding Wagon Stroller Cart for Kids | Titanium Series Plus | Beach Park Garden & Tailgate (Solid Black)

  • ...n use. Simply fold it up and store it in the trunk of your car, closet, or garage. When you need it - pull it out and expand..
  • ✔️ TRAY & REMOVABLE COOLER & CANOPY: The accessory tray folds up and clips to the wagon. The cooler and canopy are both removable and instantly provide cold beverages and shade. TITANIUM SERIES Push Pull Folding Wagon comes standard with the following brand new features: suspension springs, rear door for hauling oversized items, fold-up tray to support oversized items, rear basket, removable cooler, adjustable push handle, wheel brakes, and five-point safety harness..
  • ✔️SAFETY AND EASE OF USE: No other foldable wagon has the option to not only pull the wagon with the extendable handle, but also push it with the padded, adjustable push handle. suspension springs for comfortable, plush ride locking foot-activated brakes on all four wheels two 5-point child seat belt safety harnesses to keep toddlers safe 360 degree swivel front wheels for maximum maneuverability locking latch to keep wagon securely folded in folded position. Some assembly required..
Check Stock