Reviews Push on Hose Barbs
204Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling
- Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily,just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
- Large quantities: 204 matching kits total, Spray (14 pcs), Micro Drip (12pcs), Tees (50pcs), Drip Emitter (18pcs), Oblique Barbed 4-way Connector (10pcs), Barbed Hose End Plug (20pcs), Hose Elbows Fittings (20pcs), Single barbs (20pcs), Straight Barbs (40pcs).
- High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
- Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
- Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/....
Check Stock190 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling
- Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily,just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
- Large quantities: 190 matching kits total, Spray (8 pcs), Micro Drip (10pcs), Tees (40pcs), Drip Emitter (18pcs), Oblique Barbed 4-way Connector (10pcs), Support Stakes (40pcs), Barbed Hose End Plug (20pcs), Hose Elbows Fittings (20pcs), Single barbs (20pcs).
- High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
- Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
- Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4....
Check StockYuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…
- 【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
- 【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
- 【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
- 【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
- The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
- 【Application Scenarios】:It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..
Check StockFive Oceans FO4277 Brass Fuel Hose Barb 1/4 inches NPT Thread x 3/8 inches Hose, Crafted for Fuel Systems, Sharp-Edged Barbs, For Any Portable Tank
- This Five Oceans Fuel line connector can be installed with confidence using our pipe-to-hose fittings..
- Perfectly crafted for fuel systems, these pipe hose fittings are the ideal use for any portable tank..
- This machined brass fitting features a male 1/4 inches NPT thread and sharp-edged barbs for 3/8 inches hose to provide excellent grip. Brass construction resists corrosion..
- Barbs provide excellent gripping power for fuel line connections.
- We recommend the use of fuel compatible thread sealant to prevent galling and provide the best possible connection.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check StockRain Barrel Connector Kit
- Includes two stainless steel hose clamps, one 3' long x 3/4" diameter hose, two poly hose barbs, and two 1/2" bulk head assemblies.
Check StockGarden Hose Repair Kit 5/8 Inch Fittings Mender 3/4 Male and Female Water Hose End Replacement Set Connector with Zinc Clamp
- ⌘【Heavy Duty】: These 5/8 garden hose repair fittings can fix and secure the ends of damaged hoses for continued use in garden hose assemblies..
- ⌘【Leak Resistant Duty】: This garden hose mender has raised ridges (or barbs) on one end of the fitting that hold it firmly in place when it is inserted into the damaged hose, creating a leak-resistant seal..
- ⌘【Material】: Water hose repair kit connectors are made of brass, and the clamps are made of stainless steel..
- ⌘【Easy to Use】: Easy to connect and disconnect, male hose end repair can be uses to repair and connect the garden hose ends. Fit for ⅝" or ¾" hose fittings..
- ⌘【Package Include】: 4 sets male and female hose end repair connector with clamp, extra 8 pack garden hose washers..
Check StockACDelco 91002 Professional Power Clean Cooling System Flush Tool Kit
- Equipped with a pulsating gun assembly with a pre-set regulator for accuracy.
- Hinders water line backflow to lessen water pump damage.
- Large rubber tip for radiator necks and direct flushing of the engine block.
- Small rubber tip on the whip hose for direct access to the heater core tube stubs.
- 5?8 in and 3?4 in heater hose barbs for flushing heater cores or engine blocks.
Check StockGardrip 60 Pieces Drip Irrigation Elbow Fittings for 1/4 Inch Drip Tubing Barbed Elbow Corner 90 Connectors for Irrigation or Sprinkler Systems
- 【Package Quantity】: Package includes 60 pieces of elbow hose connectors, which let you connect your irrigation systems as you wish.
- 【Barbed Design】: The barbed ends grab tubing, which makes the tube connection more firm, and not easy to fall off, ensure a secure leak-proof connection..
- 【Material】: The drip line elbows are made of high quality engineering plastics, solid and durable, ensure years of using..
- 【Easy to Install】: It is easy to install without any glue, tools or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak..
- 【Wide Application】: These elbow fittings are suitable for garden, lawn, greenhouse, patio and other watering drip irrigation system..
Check StockTippmann Camoflauge Decal Kit for A-5
- Fitting is compatible with 1/8" INTERIOR DIAMETER Hose.
- Fitting is NOT compatible with 1/16" INTERIOR DIAMETER Hose.
Check StockTSTabc Inline beer filter Home Brewing Hose Barb in-Line Strainer 180 micron 80 mesh Water & Beer Filtering White
- Removes sediment.Perfect for large batches and dry hopped beers..
- No Taste-spoiling aeration or chemicals. Save time and beer..
- Include 6 hose barbs 1/2"(12mm) hose barb, 3/8"(9mm)hose barb, 1/4"(6mm)hose barb available..
- Screen: 180 micron / 80 mesh Max Operating Temperature: 65C/150F Max Operating Pressure: up to 150 psi.
Check StockDa by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T
- Packaging Includes:2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
- Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
- Solid Connections:The T shaped hose barb can be solid connected to the hose(Fit hose witch inner diameter of 10mm),The pipe clamps can create a tight seal on flexible or semi-rigid hose..
- Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
- Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
Check StockJoywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)
- 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
- 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
- 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
- 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
- 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check StockDixon PTLS10040 FNPT Poly T-Line Strainer, 40 Mesh, 1\ ID, Polypropylene
- Improves the taste and clarity of your beer by filtering trub, krausen, hops, and proteins..
- Saves time and beer, pays for itself in a few batches, get more beer out of each batch, easier and quicker than cold crashing or additives..
- Made of high quality material, rugged and durable for repeated use, the maximum operating temperature is 150℉..
- Easy to use and clean, gravity fed using your racking siphon, no need to pressurize or pump, fewer parts to clean, fits 3/8in inner diameter siphon tubing (standard size)..
- Perfect for large batches and dry hopped beers. Include 2 hose barbs, 1/2in(12mm) hose barb, 1/4"(6mm)hose barb available..
Check Stock