Reviews Push on Connectors

Razor E100 Scooter 24 Volt Controller - with 7 Connectors for Razor E100 and E125 (Versions 10+), E150 (Versions 1+), E175 (Versions 18+) Razor Part #W13111612015

  • ► Razor Factory Original Replacement 24 Volt Control Module with 7 connectors and 4 pin throttle connector.
  • ► COMPATIBLE ONLY WITH: Razor E100 - E125 Versions 10 and up, E150 Version 1 and up, and E175 Version 18 and above.
  • ► VERSION SPECIFIC CONTROLLER: This Control Module has 7 connectors (5 plastic connectors & 2 metal connectors)..
  • ► IMPORTANT INSTALLATION INFORMATION: The E100 Series Razor Scooter is a PUSH START Scooter. You need to Push the Scooter, Twist the Throttle and then the Motor will Engage.
  • ► IMPORTANT PRODUCT INFORMATION: Your E100 / E125 / E150 / E175 Version is determined based on your 8-digit Product Serial ID code. The Serial Number can be found below the Barcode on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"= version 1, "02"= version 2, etc.).
Check Stock

Insertion and Flaring Tool for RG-6 Coaxial Cable

  • Simplifies coax installation by allowing connectors to push on quickly & easily.
  • Works great for RG6, RG6 Quad, RG59 Type F connectors (sold separately).
  • Great for threading Male F connectors onto Female F base.
  • F barrel allows for stronger grip & more leverage.
  • Comfortable three-pronged design eliminates stress on your hands.
Check Stock

Baby Trend Secure 35 Infant Car Seat Base, Black

  • Compatible with Baby Trend Secure 35 and Secure 32 infant car seats, Flex Loc and EZ Flex Loc infant car seats. This base is not compatible with Ally 35 Baby Trend infant car seats.
  • Integrated latch system, with easy "push-on" compact latch connectors, built-in latch connector storage.
  • Built-in belt lock-off for installing with vehicle belts.
  • Push-button release latch connectors and adjuster allow for quick, easy vehicle-to-vehicle transfer.
Check Stock

3M Scotchlok Moisture Guard Weatherproof, UV-Resistant Connector for 2-3 Wires, 16-14 AWG (solid/stranded), 25 per bag

  • 【Safe and Reliable】Rated Voltage: 250V/4KV.
  • Rated Current: 32A. Glutoad lever wire connectors selected high quality flame-retardant insulating material, no corrosion, anti-aging, resistance high temperature, against electrical shock and long service life. Internal shrapnel copper material, and better conductive properties..
  • 【Time and Effort Saving】Glutoad lever electrical connectors can quickly connect and disconnect wires. If you want to replace wires, only need to pull up the orange levers, pull out the unneeded wires and replace them. There is a test hole in every Glutoad electrical wire connector surface, it can be used to check whether the wires have electricity or not..
  • 【Space Saving】Glutoad lever terminal connectors are compact, simple, reliable and reusable. When you combine the wires, you don't need to worry about twisting between the wires..
  • 【Easy to Use】First, strip the wire according to 0.35-0.47inch, then push the orange lever up to 90° and push in the wires, last push the lever down. When the wire is inserted into the Glutoad wire splice connector and locked, the wires will not come loose..
  • 【Widely Used】Glutoad wiring connectors kit can meet your different demands because they have 3 different conductors (2 3 5 Port). T....
Check Stock

Mxzzand 3in Industrial Robot Parts Accessories Omnidirectional Wheel Metal 2Pcs for Industry Production with 10pcs Driven Roller

  • Among the many items in this kit are: Linkbot-I robot, 1 Linkbot Wireless Dongle, 3 Snap Connectors, 2 3.5" Wheels, 2 4" Wheels,1 Ball Caster, 1 Push Scoop, 1 Hacky Sack, 1 36" USB Cable, 1 7" USB Cable, 1 8"x10" Resealable Bag, 1 Year Linkbot Warranty.
  • 1 Sketch Pack, 12 Snap Connectors, 1 Gripper Pair, 2 Bridge Connectors, 3 Cube Connectors, 1 L Connector, 1 U Connector. 2 Snap Connector Caps, 2 3" Rectangle Connectors, 2 4" Rectangle Connectors, 2 5" Rectangle Connectors, 2 T Connectors, 8 Colored Foam Cubes, various screws and nuts.
  • 2 Arduino-Uno-Compatible Boards, 1 USB A-B Cable, 1 Joystick, 1 RGB LED, 1 Ultrasonic Distance Sensor, 8 Red LEDs, 8 Green LEDs, 8 Blue LEDs, 8 Yellow LEDs, 2 7-Color LEDs, 2 GRB LEDs, 12 220 Ohm Resistors, 12 10k Ohm Resistors, 1 LDR VT90N2 Photoresistor, jumper wires, 3 10k Potentiometers, 1 Fullsize Breadboard, 6 Push Buttons.
  • 1 9V Battery Holder, 1 Mini Breadboard, 1 Linkbot-Arduino Cable, 1 2-in-1 Dual Phillips/Slotted Screwdriver, 3 Snap Connectors, 1 Cube Connector, 1 L Connector, 3 Mounting Plates, 2 Sensor Bracket, 1 Li-ion Rechargeable Battery,.
  • 1 Color Sensor, 2 Short Distance IR Distance Sensors,1 RGB LED Module with Common Positive Lead (Common Anode), 2 RGB LED Module with Common Negative Lead (Common Cathode....
Check Stock

UTMALL Electrical Service Tool Connector Removal Tool for VAG VW Audi Porsche

  • For the removal for VAG / Porsche connectors.
  • Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
  • Fits directly onto the push and pull connectors.
Check Stock

Arlington NM94-25 Black Button Push-In NM Cable Connector, 3/8 Trade Size, Fits 1/2-Inch Knock Outs, Black, 25-Pack

  • 3/8 Trade Size, Fits 1/2-Inch Knock Outs.
  • Lowest cost NM cable connectors on the market and offer the fastest installation.
  • Disconnect electrical power, insert connector into knockout, push cable in to desired length.
  • Connectors offer easy smooth cable insertion for single or multiple cables and a secure hold.
  • Better cable connectors for one or two cables that install easy, exceeds UL pullout tests.
  • Trade Size 3/8, snaps into ½-inch knock-out to protect cables from rough metal KO edges.
  • Offers the fastest method for installing single or multiple cables.
  • Meets UL listing and CSA requirements for single or multiple cables.
  • Arlington Industries Innovates to make work easy.
Check Stock

Lisle 13120 Electrical Connector Separator

  • Quickly Disconnects Electrical Connectors Without Damage.
  • Engage the tool tip behind the connector clip.
  • The tool is double-ended to fit different access angles.
  • Works on Weather Pack and other automotive electrical connectors.
Check Stock

Electrolux 316202200 Frigidaire Oven/Range Bake Element Black

  • Oven bake heating element with push on terminals..
Check Stock

BETOOLL 8pcs Compression Tester Automotive - Digital Compression Gauge 0-300PSI for Petrol Engine Cylinder Compression Test Tool Kit with Adapters & Hose

  • Smart Digital Gauge: Clear and accurate data showed in backlight display, with 4 different kinds of numerical units in PSI, KPA, Bar, and KG/CM², easy to control with buttons..
  • Scope of Application: Engine cylinder compression test tool kit could be used on cars, trucks, ships, ATVs, UTVs, RVs, motorcycles, snowmobiles, boats, off road vehicles, etc..
  • Quick Release Valve Design: Compression tester with release valve desgin could offer single-handed operation inflation and deflation..
  • Accurate Measurement: Digital compression gauge has 0.5 display resolution instead of normal 5PSI display resolution compression tester..
  • ALL-IN-ONE COMPRESSION TESTER KIT: 1x digital gauge, 1x extension hose, 1x straight push-on connectors, 1 x angled push-on connectors, 4x brass adapters with metric male fittings & O-rings: M10, M12, M14, M18..
Check Stock

SRRB Direct Low Voltage Replacement Landscape Light Wire Cable Connector 6 Pack for Malibu Paradise Moonrays and More

  • 【PACK OF 6 CONNECTORS】Each package contains 3 PAIRS of low voltage outdoor light cable connectors. Enough in each pack to connect 3 landscape fixtures or replace faulty connectors..
  • 【RATED BEST LANDSCAPE CONNECTOR】Poor landscape wire connectors can easily become brittle, causing them to be replaced every other month or year. ✔Our landscape lighting connectors are made from extremely hard nylon plastic with machined terminal steel pins and Zinc coated to ensure your landscape lights work perfectly each, and every time..
  • 【COMPATABLE WITH】Great for 12 or 14 gauge low voltage landscape wiring. ✔Replace old faulty connectors found on outside wall mounts, edge, walkway, garden, fences, downlight, path and patio deck lighting for brands like Moonrays, Paradise, Hinkley, Kichler or Malibu..
  • 【EASY TO INSTALL】NO Splicing/Crimping or tools required! ✔Quickly and easily install two low-voltage cables to your lighting fixture in 5 minutes or less! ✔Taps wires without cutting or crimping, providing a solid and secure connection guaranteed!.
  • 【SUPER LONG LASTING】Best improved design over the push or pinch style connector and completely reusable! ✔NO more poor connections! NO more flicking or bulb out! ✔1 Year hassle free warranty and....
Check Stock

24V Control Module, 7 Connectors, 4-Wire Throttle, Fits for Razor E100(V10+), E125 (V10+), E150 (All Version), eSpark(All Version), Trikke E2 (All Version), Model: ZK2400-DP-LD (ZK2400-DP-FS)

  • COMPATIBLE ONLY WITH: Razor E100 & E125 Versions 10 and up, E150 All Versions, and eSpark(All Versions), Trikke E2 (All Versions).
  • DOES NOT Fit Razor Black Label E100, Power Core E100, E100 Glow Electric Scooters. The Razor Power Core E100, Razor Black Label E100, Razor E100 Glow and the Razor E100 scooter are different models and most parts are not interchangeable among them.
  • Replace Razor part #: W13111612015, Model No: ZK2400-DP-LD (ZK2400-DP-FS). 7 connectors (5 plastic connectors & 2 metal connectors), 4 pin throttle connector.
  • Version Specific Controller: The version number is located on the ID tag which may be found on the battery charger, battery box, handlebar stem, bottom of scooter, or other areas. The 7th and 8th numbers on the Razor ID tag are the version number. (For example: 01 = Version 1, 09 = Version 9, 14 = Version 14).
  • Installation Tips: The E100 series Razor scooter is a PUSH START scooter. You need to push the scooter, twist the throttle and then the motor will engage. Please check the wiring to make sure that it is correct before installing the new controller.
Check Stock

EASTER EGGS.

  • ​Celebrate any special occasion with this Diamond Anniversary Thomas push-along, die-cast train engine.
  • ​Train engine features shiny blue body and sparkly wheels.
  • ​This push-along toy engine is compatible with all TrackMaster tracks (Track sets sold separately and subject to availability.).
  • ​Comes with plastic connectors to attach Thomas to other push-along or motorized TrackMaster engines, vehicles, cargo cars or tenders (Each sold....
  • ​For preschool children ages 3 years and older.
Check Stock