Reviews Punch And Die Set

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

  • Dimple Die for 1-1/4” Actual Hole Size.
  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
  • For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
  • Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock

Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch Driver Die Set

  • Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall).
  • Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction..
  • Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts.
Check Stock

PIKWO Hand Press Heavy Duty Eyelet Grommet Machine Rivet Press Punch Tool Kit with 3 Dies and 900 Pcs Grommets Self Piercing Grommet Maker Labor Saving Corsetry Class Recommended

  • [Whats In The Package]3 Interchangeable Dies & Grommets: Including #0 (1/4", 6 mm), #2 (3/8", 9.5 mm), #4 (1/2", 12 mm) dies & 900 grommets (300 each....
  • [Improve Your Efficiency]There is a snap-ring incorporated onto the stem of the top die and it holds the grommet in place,no nees to hold the grommet....
  • [Make A Perfect Grommet]Self piercing grommet machine with our die set and nickel plated grommets will punch a hole and set the grommets in one....
  • [Labor Saving]Mounted to a tabletop or just stand alone. Gets grommets to be set further into the material, not just along the Edge. Press the Lever,....
  • [Application]Our grommet machine can be used as a punch machine, eyelet machine, and rivet machine. It can help you to punch the grommets for Banners,....
Check Stock

1 Ton Aviation Power Punch Kit Sheet Metal Hole Punching 7 Sizes Die DIY Repair

  • Durable power punch tool for punching accurate round holes through all types of materials.
  • From thin brass metal to plastic sheet through 16 gauge mild steel..
  • Package comes with seven quick-change, durable heat treated punch-and-die sets..
  • Sizes from 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 9/32". Punch opens up to 1/4".
  • Set completes with a durable plastic storage case.
Check Stock

Greenlee 7304 Knockout Punch Driver Kit

  • Set contains 4 punch and die sets, and high impact plastic case.
  • Use with battery-powered, hydraulic, ratchet or manual drivers.
  • Properly assembled through pilot holes, they will make clean, fast and accurate holes.
Check Stock

Klein Tools 53728SEN Punch Set, Optimized Design 10-Guage Mild Steel Knockout Punch Set with Black Finish, 1/2-Inch

  • Punch Set optimized design reduces wrench effort.
  • Also cuts aluminum, fiberglass and plastic.
  • Set includes 1/2-Inch (13 mm) punch and die with 3/8-Inch (9.5 mm) draw stud.
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

Hand Press Grommet Machine, Heavy Duty Industrial Grommet Eyelet Tool Kit Table Mount Rivet Press Hole Punch Tool with 3 Dies and 900 Grommets

  • This 3 die hand press grommet machine is an essential equipment for dress makers, arts & crafts, sign shops and manufacturers, ideal for craft and industrial use.
  • Made of cast iron, built to last. This manual eyelet punch grommet machine is smart which is very easy to operate because of the simple structure, also convenient for shipping.
  • Specially designed for banners, signs, awnings, posters, curtains, digital printing, scrapbooking, corsets, belts, bags, shoes, etc, widely used as punch machine, eyelet machine, snap fastener machine, rivet machine.
  • The rivet press hole punch tool machine can be mounted to a tabletop or stand alone, which can fit anywhere as you want, just install with the die in suitable size.
  • Package includes 1 x Grommet Machine, 3 sets x Dies, 3 bags x Grommets (Total 900 pcs). The eyelet punch tool can exchange different die sets and 3 different dies can meet most needs.
Check Stock

uxcell Grommet Tool Kit 100 Sets 1/2\ Copper Grommets Eyelets with 3 Install Tools, 2 Colors 12mm Inside Dia.

  • The grommet kit contains 100 sets of eyelets, 1 base, 1 punch, and 1 install tool..
  • Grommets Size (approx): 5mm/0.2" inside diameter, 10mm/0.4" outside diameter..
  • Made of copper material and electroplated finished, strong and durable..
  • Get what you need in 1 set, easy to set the grommets in place with the hole punch and setting die..
  • Perfect Tools for repairing and decoration, suitable for belts, tents, shoes, clothing, curtains, handbags, leather, and DIY crafts..
Check Stock

Lord & Hodge 1073A-1 Grommet Kit

  • Number of Grommet Sets Per Kit: 24 Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die..
  • A handy, compact, economical kit complete with tools and 12 rustproof brass grommets for immediate replacements or repairs in canvas or plastic..
  • Easy to follow instructions #0, 1/4" inner diameter Manufacturer: Lord & Hodge..
  • Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die. No. 1073A 0: 1 4.
Check Stock

uxcell Grommet Tool Kit 100 Sets 3/8\ Copper Grommets Eyelets with 3pcs Install Tools, 10mm Inside Dia. Gold Tone

  • The grommet kit contains 100 sets of eyelets, 1 base, 1 punch, and 1 install tool..
  • Grommets Size (approx): 10mm/0.4" inside diameter, 17mm/0.67" outside diameter..
  • Made of copper material and electroplated finished, strong and durable. With a clear box, convenient for storing small grommets..
  • Get what you need in 1 set, easy to set the grommets in place with the hole punch and setting die..
  • Perfect Tools for repairing and decoration, suitable for belts, tents, shoes, clothing, curtains, handbags, leather, and DIY crafts..
Check Stock

uxcell Grommet Tool Kit 50 Sets 1/2\ Copper Grommets Eyelets with 3pcs Install Tools, 12mm Inside Dia. Bronze Tone

  • The grommet kit contains 50 sets of eyelets, 1 base, 1 punch, and 1 install tool..
  • Grommets Size (approx): 12mm/0.47" inside diameter, 21mm/0.83" outside diameter..
  • Made of copper material and electroplated finished, strong and durable. With a clear box, convenient for storing small grommets..
  • Get what you need in 1 set, easy to set the grommets in place with the hole punch and setting die..
  • Perfect Tools for repairing and decoration, suitable for belts, tents, shoes, clothing, curtains, handbags, leather, and DIY crafts..
Check Stock