Reviews Pull Up Cleat

Tie Boss Pulley Lighting Accessories with 10-Feet Rope, 3/8-Inch

  • EASY AND SAFE: Eliminate the dangers of bungee cord snap backs and poorly tied knots. The patented Jam Cleat system allows constant tension without tying off. This is for heavy duty indoor and outdoor use..
  • PULL AND PLACE TO LOCK: When you need to secure your load, just pull tight and clip in. When ready to release just pull and unlock like a venetian blind. No need for constant knot tying..
  • HOIST THINGS WITH EASE: These are perfect for hoisting and storing things up in a garage. Because they unlock with just a tug of the rope, once installed there is no need for a ladder to raise, lower and lock your stored items. They can be operated with one had so you can raise and lower two simultaneously..
  • DURABLE & WEATHER RESISTANT - Made of heavy-duty Nylon (so they will not rust) the Medium Duty Tie Boss has a 150 lb Working Load Limit. There are no moving parts so it will not rust, freeze or break..
  • INCLUDES: 1 Tie Boss Jam Cleat, 15 Ft of solid braid, polypropylene rope, 1 G-Hook, 1 S-Hook1 S-Hook, Can be used for bike racks, hanging, cargo carriers, storing ladders. This is a must have for campers, kayakers or movers and pilots..
  • LIMITED LIFETIME WARRANTY - We offer a Lifetime warranty on all parts with the exception of the rope..
Check Stock

SPEEDWOW Bed Tie Down Anchors Brackets Box Link with Plates Compatible with 2015-2021 F150 F250 F350 FL3Z99000A64B FL3Z-9928408-AB

  • Compatible with 2015 2016 2017 2018 2019 2020 2021 F150 F250 F350 and Raptor Models. Replace OE# FL3Z99000A64B or FL3Z-9928408-AB. Direct replacement for a proper fit every time..
  • PREMIUM QUALITY - The Box Link Tie Downs with keys and plates is constructed of die-cast zinc with heavy-duty ABS plastic housing and stainless steel lock assembly. Black powder anticorrosive coating, you don't need to worry about the rain or other matters to make them rusted..
  • EASY TO INSTALL-- It is very easy to install and you can complete it within 15 minutes. The installation procedure is at the follows: 1.Take your Box Link cleat, unlock it, and line it up with the insert.
  • 2.Pull out on the bottom of the cleat, and slide the top insert up into place.
  • 3.Once in the desired position, use the special keys to lock the cleat into place..
  • WIDE RANGE FOR USE - The tie down anchors are heavy-duty 1000 lb rings, they are ideal to add tie down points for a truck and let you far away from cargo's swing and noise..
  • SPEEDWOW provide Bed Tie Down Anchors Brackets Box Link have a 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Kayak Hoist – Overhead Pulley System with 125 lb Capacity for Kayak, Canoe, Bike, or Ladder Storage by Rad Sportz

  • KAYAK LIFT - The kayak ceiling hoist easily lifts and stores any style bicycle, ladder, or kayak up to 125lbs overhead. The kayak hanger for garage can accommodate many sizes of kayaks for convenient storage in your garage or shed..
  • EASY INSTALLATION - The heavy-gauge bike hoist for garage ceiling comes with plenty of premium rope for use on ceilings up to 12-feet-tall and can be mounted either parallel or perpendicular to your joists for your convenience..
  • UNIQUE ROPE BRAKE - Designed with an innovative automatic locking brake that pinches the rope with every pull, the canoe hoist allows one person to raise the cargo themselves. A wall cleat is provided to tie off excess rope after lifting your load..
  • FUNCTIONAL STORAGE - This kayak pulley system for garage helps you declutter your shed, and the kayak storage hooks are designed with a rubber coating to protect your kayaks, canoes, or personal watercrafts from scratches..
  • PRODUCT DETAILS - Materials: Rubber, Rope, and Metal. Dimensions: (L) 14" x (W) 12.75" x (H) 10". Weight Capacity: 125lbs. Comes with 1 Bike Hoist, a Cleat to Attach to Wall or Ceiling, and Mounting Hardware. Color: Black..
Check Stock

NovelBee 4 Pack of 6.1 Inch 316 Stainless Steel Folding Cleat,Flip Up Dock Cleat

  • Boat Cleat easy to install and widely use for mooring.
  • Boat Cleat constructed of marine grade stainless steel for durability and resistance to rust and corrosion.
Check Stock

VEITHI 6inch 316 Stainless Steel Folding Cleat Boat Dock Flip Up Cleat Rope Cleat w/Fasteners (4 Pack)

  • 【High-quality Materials】Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.flip up dock cleats 6 inch maximum corrosion resistance and durability in the saltwater environment, folding boat cleat rope cleat work for dock lines,mooring and etc..
  • 【Exquisite Workmanship】Our stainless folding boat cleat is high polished surface, precise, bright and with good flatness.for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks.all of our boat cleats 6 inch folding products are strict tested to ensure the best quality..
  • 【 Flip up dock cleat size】These folding cleats for boats pop up locks down when not needed, and springs up when use it.The stainless boat cleat overall Length 6",the total Width 2-1/8",raised Height 1-3/4", recessed Height 1/2",Bolt hole spacing 3-3/8" (center to center)..
  • 【Collapsible Design】These folding cleats for dock simply fold-down when not in use and flip back up when it comes time to tie off. the fold away feature be a great design, eli....
Check Stock

Boat Cleat, 4 inch Open Base Dock Cleat, All 316 Stainless Steel Boat Mooring Accessories, Include 316 Screws, 2PCS, 4 Inch

  • ▲ Attention: 4 inch is the small Dock Cleat. Size: 4 Inch / 98mm, About 0.17lb/80g (Per Dock Cleat), Screws: 8 ( Screws length 0.78in / 20mm, All 316 Stainless Steel).
  • ✔ Anti-Corrosion Materials: Marine dock cleat made of precision cast 316 marine grade stainless steel, heavy-duty open base boat cleat..
  • ✔ High quality: Highly polished to a beautiful mirror-like finish.All Dock Cleat and Free Installation Accessories are made of Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable..
  • ✔ 316 Stainless steel: All Dock Cleat and Free Installation Accessories are made of Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable. It can stand up to a kind of weather, the dock cleat is very strong..
  • ✔ Worry-Free Service: 24-Hour Customer Supports,30-Day Money Back Guaranteed..
Check Stock

YUSOVE Boat Folding Cleat 4-1/2" 316 Stainless Steel Marine Flip Up Dock Cleat

  • Boat folding cleat marine dock flip up cleats is aperfect choice to replace your plastic,nylon or broken fittings.
  • Folding dock cleat is made of 316 stainless steel,maximum corrosion resistance and durability in the saltwater environment.
  • Marine boat folding cleat size: length 4.5",raised height 1.5",recessed height 0.5",width 1.56".
  • Dock cleat folding,mounting hole to mounting hole: 2.68",easy to install,direct replacement for the old or broken one.
  • Package Includes:1 pcs boat folding cleat,stainless steel M6 mounting fasteners.
Check Stock

VEITHI 316 Stainless Steel Boat Folding Cleats 5 inch Flip up Dock Cleat for Deck and Boat Dock Cleats Folding Cleat Rope Cleat Boat Cleat with Fasteners 4 Pack

  • 【High-quality Materials】Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.flip up dock cleats 5 inch maximum corrosion resistance and durability in the saltwater environment, folding boat cleat rope cleat work for dock lines,mooring and etc..
  • 【Exquisite Workmanship】Our stainless folding boat cleat is high polished surface, precise, bright and with good flatness.for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks.all of our boat cleats 5 inch folding products are strict tested to ensure the best quality..
  • 【 Flip up dock cleat size】These folding cleats for boats pop up locks down when not needed, and springs up when use it.The stainless boat cleat overall length 5",the total width 1-3/4",raised height 1-1/2", recessed height 3.5/8",Bolt hole spacing 2-3/4" (center to center)..
  • 【Collapsible Design】These folding cleats for dock simply fold-down when not in use and flip back up when it comes time to tie off. the fold away feature be a great design, eliminate a tripping hazard. the folding boat cleats stainless steel folded down so swimmer would not be hurt when go ashore and diving off the dock.smooth ed....
Check Stock

VEITHI 316 Stainless Steel Boat Folding Cleats 5 inch, Flip up Dock Cleat for Deck and Boat, Dock Cleats Folding Cleat Rope Cleat Boat Cleat with Fasteners (2 Pack)

  • 【High-quality Materials】Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.flip up dock cleats 5 inch maximum corrosion resistance and durability in the saltwater environment, folding boat cleat rope cleat work for dock lines,mooring and etc..
  • 【Exquisite Workmanship】Our stainless folding boat cleat is high polished surface, precise, bright and with good flatness.for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks.all of our boat cleats 5 inch folding products are strict tested to ensure the best quality..
  • 【 Flip up dock cleat size】These folding cleats for boats pop up locks down when not needed, and springs up when use it.The stainless boat cleat overall length 5",the total width 1-3/4",raised height 1-1/2", recessed height 3.5/8",Bolt hole spacing 2-3/4" (center to center)..
  • 【Collapsible Design】These folding cleats for dock simply fold-down when not in use and flip back up when it comes time to tie off. the fold away feature be a great design, e....
Check Stock

Mxeol Black Folding Boat Cleats Flip Up Cleat Stainless Steel 4-1/2 inch W/Fasteners (Matte Black Coating, 4 Packs)

  • Black Folding cleats boat 4-1/2 inch marine stainless steel with back plate and fasteners. Two color options: Mirror Polished Silver and Matte Black Coating.
  • Black flip up cleats dock tie down 4.5 inch can be tied off for mooring, The distance is 2.68" / 68mm from center to center of two holes.
  • Boat cleat folding black stainless steel 4-1/2 inch, Aisi 316 stainless steel.
  • Stainless steel cleat fold down cleats 4.5 inch flip up cleat marine hardware for boat, dock, and kayak.
  • 4 Packs flip up boat cleats black are recessed cleat, raised height: 1-1/2", recessed height: 1/2".
Check Stock

French Cleat Picture Hanger Kit 6 Inch - 3 Pairs - Small Z Bar Hanger Supports 50 lbs - Z Clip Mirror Hanging Hardware

  • Picture Cleat for wood frames up to 20" wide.
  • Cleat Hanger supports up to 50 pounds. Mounting bracket can be used for many wall mount products..
  • Cleats are made of extruded aluminum 1 1/8" wide by 3/64" thick. A french cleat hanger is also called z clip, z bar hangers and wall cleats.
  • French Cleat Kits include all fastening hardware required for installation and easy to follow picture hanging instructions.
  • Includes 6 each of the #8 plastic anchors, #8 x 1" screws, #8 x 1/2" screws, clear bumpers, instructions.
Check Stock

Kingsea Road Bike Cleats and Cover Set, 6° Float Self-Locking Clips Compatible with Shimano and All Three-Hole Cycling Shoes (Red)

  • Comfortable Experience - 6-degree float allows riders to have some lateral movement on the bike. This road cleat can help you reduce the pain and fatigue, save energy and provide a safe and comfortable ride..
  • Rubber Cleat Covers - The cleat covers prevent the cleat from wearing and Prevents mud and dirt from building up inside the cleats. And the anti-skid design ensure your safety when walking on a slippery road surface..
  • Premium Material - This road bike cleat is made of high-quality nylon plastic and stainless steel, durable, high strengths and lightweight. And the cleat cover is made of high-quality rubber, wear-resistant and easy to attach..
  • Compatibility - Our road bike cleats and covers set compatible with Shimano SPD-SL pedals, and most of popular cycling road bike shoes..
  • Customer Service Friendly - If you are not satisfied with our road bike cleat sets, we will provide a 100% full refund and customer service support within 24 hours. If you have any questions, please feel free to contact us..
Check Stock

Powernail 50F Pneumatic 18 Gauge Trigger Pull L-Cleat Flooring Nailer (Installs 3/8\ to 3/4\ Hardwood & Engineered)

  • Put the Hammer Down! This 18-gauge flooring nailer takes all of the intimidation out of a floor installation with the pull of a trigger. No mallet is required to operate this tool, but it still drives an 18-gauge floor cleat! It is perfect for today's top brands of engineered flooring..
  • Install the widest variety of Wood Floor. Featuring Powernail's patented FLEX Foot technology, this 18-ga floor nailer is fully adjustable and installs engineered wood flooring from 3/4" to 3/8"..
  • Protect your floor! This Powernailer's adjustable foot will not scratch or damage prefinished floor, nor will it loosen half-way through an installation. The Flex foot keeps this tool off of the subfloor so when adhesive is used your tool will not drag or catch..
  • This trigger-pull cleat nailer is sold as a kit and includes one model 50F nailer, one large tapping block and a Heavy-Duty Carrying Case..
  • Install your floor with a nail designed specifically for floors! The Powernail Model 50F drives 18-gauge, L-shaped Floor Cleats (Floor Nails) in lengths from 1-3/4" to 1". The model 50F can install traditional tongue and groove Engineered Wood Flooring as well as Interlocking systems. Use with 18-gauge Powernail PowerCleats or similar brands 18-ga L-shaped steel cleats..
Check Stock