Reviews Ptfe Plastic

Creality Capricorn Bowden Tubing Upgrade 1M Capricorn PTFE Teflon Tube for 1.75mm Filament of Ender 3/3 Pro/5 CR-10 4pcs Hot Bed Mold Springs 2 Pair Pneumatic Coupler 1 Clipper 5pcs 0.4mm Nozzles

  • 100% Original Capricorn XS Series tubing..
  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..
Check Stock

Separating Funnel, 100ml - Pear Shaped - 19/26 Plastic Stopper, Glass Key Stopcock, Stem with Cone - Borosilicate Glass - Eisco Labs

  • 100ml borosilicate glass separatory funnel.
  • Fitted with a 19/26 interchangeable plastic stopper and PTFE stopcock.
Check Stock

Creality Capricorn Bowden PTFE Tubing XS Series 1 Meters 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Ender 3 Ender 3 Pro Ender 3 V2,Ender 5 CR-10/10S 3D Printer

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • If you have any question,please feel free to contact,we will help you.
Check Stock

Slip 2000 EWL30 4oz.

  • EXTRA-THICK LUBRICATION: Slip 2000 EWL-30 has the same properties as the EWL, except it is a lot thicker. It contains a proprietary thickening agent that makes this lubricant consistency like a 30wt motor oil. It was designed for those who love the EWL, b.
  • PROTECTION FROM CORROSION: Slip 2000 Extreme Weapons Lubricant 30 (EWL-30) provides a long-lasting barrier on all metal parts, protecting against corrosion. EWL-30 is designed to give protection against hydrogen sulfide (H2S), mild mineral acids, carbon.
  • WITHOUT PTFE INGREDIENTS: Slip 2000 EWL-30 does not contain any PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
  • REDUCE CLEANUP TIME BY 50%: Slip 2000 EWL-30 does not allow carbon, copper, lead, and plastic to stick and will reduce cleanup time by 50%!.
  • Non-toxic and non-hazardous: Slip2000 products are non-toxic and non-hazardous. All Slip2000 products are created with your health and safety in mind!.
Check Stock

Slip 2000 Gun Lube 4oz Pump

  • Long-lasting lubrication: Slip2000 gun lubricant penetrates into the smallest, tightest areas that regular oils cannot usually reach. This allows it to replenish the lubricant that has been lost, providing a long-lasting protective coating that reduces F.
  • PROTECTION FROM CORROSION: Slip 2000 Gun Lubricant's unique formulation provides a long-lasting barrier on all metal parts that protects against corrosion and that will not attract dust, dirt, or other abrasive contaminants..
  • NO SILICONE OR PTFE INGREDIENTS: Slip 2000 Gun Lube does not contain any silicone or PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
  • Reduce cleanup time by 50%: Slip2000 gun lube does not stick to carbon, Copper, lead, or plastic and will reduce cleanup time by 50%!.
  • Non-toxic and non-hazardous: Slip2000 gun lube is non-toxic and non-hazardous. All Slip2000 products are developed with your health and safety in mind!.
Check Stock

Ted Lele 8Meters 26.2Ft 4mm OD 2mm With Tube cutter PTFE Teflon Bowden Tube for (white) (8M)

  • Package Content : 1pc PTFE Teflon Bowden Tube.
Check Stock

uxcell a12100600ux0244 J Type 90mm x 1.5mm Temperature Controller Earth Thermocouple Probe 2M

  • Package: 1pc 2m Teflon PTFE Tube, necessary 3D printer parts..
  • Size: 3x4mm (IDxOD), Fit for 3mm filament.
  • Function: Used for 3D Printer J-head hotend RepRap Rostock Bowden Extruder Long Distance Feeding..
  • Material: Made of PTFE material, With smaller friction coefficient in plastic, is an ideal oil-free lubrication material..
  • Feature: Corrosion Resistance, High and Low Temperature Resistant, Self-Lubricating, Non-Sticky Surface..
Check Stock

Loctite 2087067 567 Thread Sealant 50 mL Tube, White

  • MULTI-PURPOSE WHITE PTFE THREAD SEALANT: Uses a unique system of fine-grain PTFE particles to fill cracks and thread imperfections.
  • SOFT SET WITH NO CURE TIME: Forms leak-free joints that can be tested and put into service immediately with no cure time required, and it holds tight against expansion, vibration, and contraction.
  • HEAVY DUTY: Withstands temperatures from -200 degrees Fahrenheit to 500 degrees Fahrenheit, and it has a maximum working hydraulic pressure of 12,000 PSI.
  • COMPATIBILITY: Can be used on all metal, PVC, ABS, and CPVC plastic lines carrying water, steam, caustics, and dilute acids, and it is suitable for use with all liquids and gases except for oxygen.
  • EASY TO APPLY: Brushable and non-separating for easy application, and it will not run or drip from joints.
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters

  • 【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
  • 【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
  • 【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
  • 【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
  • 【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..
Check Stock

Slip 2000 EWG 4oz.

  • Synthetic light Grease: Slip2000 synthetic grease is our Extreme weapons lubricant turned into a light Grease. Egg offers extreme pressure properties that reduce friction and wear on your weapons..
  • Protection from corrosion: egg's unique formulation provides a strong Barrier between all metal parts and protects against corrosion. It features a proprietary anti-wear formulation that is easy to Use and extremely long-lasting..
  • Without PTFE ingredients: Slip2000 egg does not contain any PTFE (Teflon) ingredients. Therefore, it will not burn off like petroleum products and is safe to use on metal, wood, and plastic parts..
  • Excellent for semi-auto and full auto locking: egg is excellent for Use on all semi-auto and full auto locking lugs, sears, bolts and slides/rails for smooth, clean operation in the extreme cold (-100°f). it will hold up under extreme heat (+750°f) as well.
  • Non-toxic and non-hazardous: Slip2000 products are non-toxic and non-hazardous. All Slip2000 products are created with your health and safety in mind!.
Check Stock

Authentic Creality Assembled Hotend Kit for Ender 3 / Ender 3 Pro/Ender 3 V2 with Capricorn PTFE and Upgraded Pneumatic Fittings, Thermistor, Heating Element, MK8 Sock and 4 Extra Nozzles

  • ...e filament is inside. This perfect fir ensures much better results on retaction moves and helps to ensure a steadier and even flow rate from your hotend!.
  • Upgraded Pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fitting is a PC4-M6 and the hotend fitting is PC4-M10. These are the standard sizes for most open source 3D printers and the same sizes used by most Chinese manufacturers..
  • 2 complimentary hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency..
  • F1rst Layer is proud to provide 24/7 customer support and we strive to achieve 100% customer satisfaction. If you have any questions or concerns about this product, please do not hesitate to contact us directly and we will assist with any and all questions..
Check Stock

HANMCE Rubber Sealing Tape Waterproof Tape White, 4in × 5ft (W×L), Outdoor Waterproof Leak Proof Repair Tape for Pools,Sink and Various Pipelines

  • You Will Get: there are 20 rolls of PTFE tapes in blue, with the size of 1/2 inch x 59 feet, sufficient quantity can meet your using and replacement needs.
  • Reliable Material: the plumbing tape is made of PTFE material, which is safe and reliable, high temperature and corrosive resistant, with strong anti aging ability.
  • The tape has good toughness, strong ductility, not easy to break, ensuring the sealing connection is more reliable.
  • Wide Usages: the PTFE thread tape is suitable for most plastic and metal pipe, fitting for both hot and cold water pipe, applied to isolate air and water, forming a tightly seal between the threaded pipes and parts.
  • Convenient to Use: the thread seal tapes are convenient to use.
  • Just clean the 2 threaded connections that need to be sealed.
  • Then wrap the end of the tape around the inner screw joint in the same direction as the rotation direction of the 2 joints.
  • And screw the external thread connector to the internal thread connector wrapped with tape and tighten.
  • Warm Reminders: recommended wrapping the pipe seal tape according to the threading direction, otherwise, it will affect the sealing performance.
  • If the thread sealing is not good, you can increase the thickness of the tape.
Check Stock