Reviews Ptfe Packing With Oil

Othmro PTFE Ball, 36mm/1.4\ Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

  • [Features]-PTFE can resist most chemicals, usually high temperature resistance, and has a low friction, non-stick surface, excellent electrical insulation properties, non-flammable, low water absorption..
  • [Function]-Used for chromatographic column packing and mixing beads, PTFE balls can reduce the bumps when corrosive reagents boil..
  • [Advantages]-Compared with other fluoropolymers (such as FEP and ETFE), PTFE can usually withstand higher temperatures..
  • [Temperature Resistance]-PTFE is inert to most liquids and vapors, and can be used from -100 degrees Fahrenheit to 545 degrees Fahrenheit..
  • [Wide Application]-PTFE balls are widely used in chemical, machinery, electronics, ball valves, electrical appliances, aerospace and other fields..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1,6AN PTFE straight hose end*6,6AN PTFE 45 Degree hose end*2,6AN to 3/8" hose adapter fitting*2, AN6 to 3/8"quick disconnect male*1,6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

uxcell PTFE Ball, 22mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

  • PTFE Ball: 22mm/0.87-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock

uxcell PTFE Ball, 36mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs

  • PTFE Ball: 36mm/1.42-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock

uxcell PTFE Ball, 19mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

  • PTFE Ball: 19mm/0.75-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock

uxcell PTFE Ball, 25mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

  • PTFE Ball: 25mm/0.98-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock

uxcell PTFE Ball, 15mm Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 5pcs

  • PTFE Ball: 15mm/0.59-inch Diameter Polytetrafluoroethylene Balls..
  • PTFE resists most chemicals, typically withstands high temperatures, and has a low-friction, nonstick surface.
  • For column packing and as mixing beads, PTFE Balls minimize bumping in boiling of corrosive reagents..
  • PTFE generally withstands higher temperatures than other fluoropolymers, such as FEP and ETFE.
  • Inert to most liquids and vapors, and usable to 550F..
Check Stock

HUYUN Generic Mouse Skatez & Mouse Feet & Mice Feet & mouseskates& for Logitech G602 Come with 2 Sets

  • 1.Packing: X2Sets mouse skates , thickness is only 1mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a....
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my....
Check Stock

HUYUN New Mouse Skates & Mouse Feet & Mice Feet & mouseskates for Razer Deathadder Elite (Comes with 2 Sets)

  • 1.Packing: X2Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a....
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my....
Check Stock

HUYUN New Mouse Skatez & Mouse Feet & Mice Feet & mouseskates Replacement for Logitech G403 G603 G703 Come with 2 Sets

  • 1.Packing: X2Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a....
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my....
Check Stock

HUYUN New Mouse Skates & Mouse Feet & Mice Feet & mouseskates for Razer DeathAdder 2013/RZ01-0015 / RZ01-0121 / RZ01-0084 Come with 4 Sets

  • 1.Packing: X4Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a....
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my....
Check Stock

2 Sets Mouse Skates&Mouse Feet&Mice Feet&Mice Skatez&mouseskates Replacement for Razer Mamba 2015 Chroma 5G / Mamba Tournament Edition Gaming Mouse

  • 1.Packing: X2Sets mouse skates , thickness is only 0.6mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a longer time.
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my opinion, and great value..
Check Stock

HUYUN Generic Mouse Skatez & Mouse Feet & Mice Feet & Mouse Skates & for Logitech G102/G PRO Gaming Mouse(Come with 2 Sets)

  • 1.Packing: X2Sets mouse skates , thickness is only 0.8mm (including rubber layer 0.1mm).
  • 2.Helps Protect Your Original Feet From 100% Original Hotline Games Product,Smooth gliding Ensured From 100% Original Hotline Games Product..
  • 3.PTFE Teflon. (erformance - Made with PTFE Teflon with 3M Adhesive).
  • 4.Competition - New proprietary F4 Silver Treated PTFE to provide a glide smoother than ordinary PTFE, glide feels smoother, and will last for a longer time.
  • 5.Be sure to check out original mouse feet from Tiger Gaming as well, same factory as Razer, better cutting, thicker, slightly smoother glide in my opinion, and great value..
Check Stock