Reviews Ptfe Liner 3d Printer

uxcell a12100600ux0244 J Type 90mm x 1.5mm Temperature Controller Earth Thermocouple Probe 2M

  • Package: 1pc 2m Teflon PTFE Tube, necessary 3D printer parts..
  • Size: 3x4mm (IDxOD), Fit for 3mm filament.
  • Function: Used for 3D Printer J-head hotend RepRap Rostock Bowden Extruder Long Distance Feeding..
  • Material: Made of PTFE material, With smaller friction coefficient in plastic, is an ideal oil-free lubrication material..
  • Feature: Corrosion Resistance, High and Low Temperature Resistant, Self-Lubricating, Non-Sticky Surface..
Check Stock

Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting

  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS,....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 1 Meter in length PTFE tubing. F1RST LAYER is an authorized distributor of Creality and Capricorn 3D Printing products. Please contact us directly for....
Check Stock

3D Printer Parts Accessories Tool Set Cleaner Kit 41PCS with E3D Nozzles Cleaning Needles Tweezers Heater block and Cover,Tube Throat for Ender 3 Pro/Ender 5/ CR-10/10S

  • Aluminum Heater Block: Works perfect with nozzle and nozzle throat..
  • Stainless Steel Throat: 3D printer parts aluminum heater block extruder hotend kit is replacement parts for Ender 3 /Ender 3 Pro / Ender 5 /Ender 5....
  • 0.4mm Brass Nozzles: The 3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy....
  • PTFE Teflon Bowden Tube : PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS,....
  • Excellent Cleaning Needles: The E3D nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break.....
Check Stock

SIQUK 2 Pcs PTFE Teflon Tube 2M 4 Pcs PC4-M6 Quick Fitting 4 Pcs PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament

  • CHPOWER PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL..
Check Stock

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament 2.0mm ID/4.0mm OD 1.5 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....
Check Stock

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) 2.0 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality..
  • LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping..
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!.
Check Stock

Creality Ender 5 Pro Creative FDM 3D Printer Upgrade Silent Mainboard Metal Extruder Frame with Capricorn Bowden PTFE Tubing 220x220x300mm for Adult Designer Home and School Use

  • 【Creality Ender 5 Pro 3D Printer 】With three upgrade Features, V1.1.5 Silent Mainboard, Metal Extruder Frame, Premium PTFE Tube. Solid cube frame....
  • 【V1.1.5 Silent Mainboard】Ender 5 Pro Upgrade Motherboard CV1.1.5 Silent Mainboard with TMC2208 Driver, Marlin 1.1.8 and Bootloader installed,....
  • 【Metal Extruder Frame】The metal extruder have better stronger pressure to pushing filament into printer nozzle, and longer lasting heat, will not....
  • 【Premium PTFE Tube】Upgrade Capricorn Bowden PTFE Tubing, High Temperature Resistance-Heat, good flexibility, abrasion resistance, chemical....
  • 【Printing Support】With 1 year warranty, good customer service, if you have any question , please feel free to contact us, we will reply to you as....
Check Stock

Genuine Capricorn Premium Bowden Tubing XS Series Bowden Tubing for 1.75mm Filament with Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings for Creality Ender 3/Pro Ender 5 CR-10/10S 3D Printer 1 Meter

  • Creality Capricorn Tube----100% Original Capricorn XS Series tubing.Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives..
  • Lower Friction----High lubricity additives make XS Series tubing the lowest friction bowden tubing on the market. It developed specifically for 1.75mm filament with an extremely precise internal diameter.The inside diameter of bowden liner is one of the critical feature for the successful print..
  • High Temperature Resistant----High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.The maximum operating temperature up to 280!.
  • Upgrade Your 3D Printer----Capricorn Premium XS bowden Tubing is officially authorized and guaranteed quality.Using Original Capricorn XS Series tubing make less friction and more responsiveness,means you can save more time.It's really a great way to upgrade your 3D printer with a reasonable prices!.
  • Brass Pneumatic Connector----The PC4-M6 and PC4-M10 pneumatic connector is made of brasss, with small metal teeth,which can tightly coupled.Therefore, it's never leakaged filament during printing..
Check Stock

PTFE Bowden Tube 1M 1PCS+ 6pcs KJH04-M6 Fittings + 6pcs JP4-01 Pneumatic Fittings with PTFE Tube Cutter for 3D Printer 1.75mm Filament

  • 3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate....
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 6 * JP4-01 and 6 * KJH 04-M6 bowden tube fitting to secure PTFE in extruder and hotend..
  • Easy to Install: the pneumatic fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube....
  • Compatibility: fit for 3D Printer 1.75mm Filament and other devices..
Check Stock

Creality Official Capricorn Bowden PTFE Tubing Teflon Tube XS Series 1 Meter for 1.75mm Filament with Mold Spring,Pipe Cutter,M6 M8 Pneumatic Joint for Ender 3/3 Pro/5 CR-10/10S/20/20 Pro

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance....
  • LOW FRICTION:Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to....
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems....
Check Stock

Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing

  • It's 100% Creality Original and Creality-Capricorn PTFE Tubing..
  • Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM..
  • Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer..
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when....
Check Stock

Aystkniet Official Creality Ender 5 Pro 3D Printer, DIY FDM 3D Printers for Home and Adults, Upgraded Silent Mother Board Metal Feeder Extruder and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm

  • Super Quiet: Unlike the cheap 3d printer, the silent board of the ender 5 pro was really great, no jerking motions or sounds from the motors which includes the newest Creality V4.2.2 silent Mainboard with TMC 2208 stepper motor drivers..
  • Better Extruder Kit: Durable Metal Extruder provides strongers pressure while pushing filament through the nozzoles which will bolster the overall printig performance..
  • Capricorn Tubing: Capricorn Premium PTFE Tube makes the Creality Ender 5 pro 3-d printer better suited to print with flexible filaments and other exotic materials..
  • Brand Power Supply: Ender 5 pro 3d printing machine built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes..
  • Easy to Build: Creality Ender 5 Pro 3D Printer was easy to assemble, You woul printing in about an hour, especially with the good supplementary setup videos on YouTube..
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • 3D Printer Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Check Stock