Reviews Ptc Thermistor

Ohaus 30500530, Guardian 5000 HP Hotplate and Stirrer, Ceramic 7\ x 7\ Top Plate, 120V

Digital Multimeter, NCV Contactless Multi Tester, Battery Tester, Auto-Ranging Tests, Current, Voltage, Resistance, Continuity, Diode, Frequency, Overload Protection, LED Light, 2 Test Leads

• ▲Large Backlit Display : With 2.2 inch large backlight display and flashlight, convenient for you to work in dark places.
• Rubber cover (removable) protects multimeter from drops, wear-resistant, anti-static and non-slip.
• ▲Overload Protection : Ammeter is equipped with two fuses and a PTC thermistor to prevent damage to the circuit.
• ▲Automatic Sleep : The instrument will automatically sleep after 15 minutes of inactivity to extend battery life.
• ▲Auto-Ranging Measures : Automatic range selection, 2/3 readings per second, 2000 effective counts.
• ▲Data Retention : When the measurement reading is unstable, press the HOLD button to fix the reading, and the data hold button is convenient for reading and recording.
• ▲Overload Protection : There are two fuses on the internal circuit board of the instrument,two PTC thermistor protection circuits to prevent circuit damage due to wrong measurement.
• ▲Package Content : 1 x Digital Multimeter, 2 x Test Leads, 3 x AAA Batteries, 1 x User Manual.
• ▲24-Month Warranty : We provide 24 months unconditional warranty and lifetime after-sales service.

uxcell NTC Thermistor Resistors 10D-9 2A 10 Ohm Inrush Current Limiter Temperature Sensors Pack of 20

• [Small Probe]: NTC thermistor can measure the gap temperature that other thermometers cannot..
• [High Sensitivity]: The thermistor is high sensitivity and wide operating temperature range(-50℃~125℃), which is easy to use..
• [Widely Used]: Thermistors can be used as electronic circuit components for instrument circuit temperature compensation and temperature difference cold junction temperature compensation..
• [Good Stability]: Thermistor has good stability and strong overload capacity..
• B3950 100K 1% 60mm Thermistor. The model can be judged according to the length of the thermistor cable..

Ametherm SL22 1R020 (Pack of 2) NTC THERMISTOR,ICL 1 OHM 20% 20A 22MM, (Also SG100, SG301)

• Pack With: Package of 10pcs 1% accuracy 10K thermistor, 60mm / 2.4in line length..
• High Sensitivity: The thermistor is high sensitivity and wide operating temperature range, which is easy to use..
• Wide Use: Thermistor can be used as electronic circuit component for instrument line temperature compensation and temperature difference cold junction temperature compensation..
• Small Size: The NTC thermistor is able to measure the gap temperature that other thermometers can't measure..
• Good Stability: The thermistor has good stability and strong overload capability, easy to process into complex shapes..

Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend 100K 3950

• M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span.
• DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor.
• Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " &"Hotend "All In ONE"....
• For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use.

Thermistor for Dometic 3851210025 Refrigerator,RV Refrigerator Sensor Replacement for Dometic Refrigerator RM Series W 2 Wire Thermistor RM1350 2351 2354 2410 2620 2652 2852 2862 3807

• Replacement for Dometic refrigerators 3851210025 thermistor. Replaces Part Numbers: 2931863035 2931863076 3851059042.
• The thermistor for dometic rv refrigerator adopts environmental protection epoxy resin coating and double-layer sealing, with better insulation....
• Fix for Dometic refrigerator temperature is over cold freezing or hot spoiling.Just try to replacing our dometic 3851210025 refrigerator thermistor....
• Compatible with almost all Dometic refrigerators models starting RM with two wire thermistor:RM1350 RM2351 RM2354 RM2410 RM2451 RM2454 RM2551 RM2554....
• The model name of thermistor may be different,details pls see below product numbers.3-year warranty .If you have any question pls feel free to contact....

Anet 5pcs Thermistor NTC 3950 100K ohm Thermistor for RepRap 3D Printer Heatbed or Hot End 3D Printer Kit Accessories - White 5PCS

• Anet ​3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers.
• The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero eAnet 3d printer tc.
• There is a 2 pin female connector on the thermistor for 3D printer.
• Wire length for the thermistor: 1m/47 inches..
• Recommended parameters for the thermistor: R25℃=100K.

Genuine E3D Hotend Thermistor Cartridge Replacement

• Direct replacement of cartridge type thermistor in E3D hotends..
• A custom made thermistor encapsulated into an easy to use cartridge package..
• Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm).

HICTOP 100K ohm NTC 3950 Thermistors/Temp Sensor for Reprap Creality Ender 3 Ender 3 Pro CR-10 10S 3D Printer Pack of 5 1m/39.4inches

• HICTOP 3d printer thermistor can be used on both of the heated bed and the extruder for 3d printers.
• The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc.
• There is a 2 pin female connector on the thermistor for 3D printer.
• Wire length for the thermistor: 1m/39.4 inches.
• Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%.

Hot Glue Gun RHAEGON 60W Mini Craft Glue Gun with 50pcs Glue Sticks 7mmx130mm ON/Off Switch No Drips and Leakage Patent Design for Home Repair DIY Art Crafts Festival Decorations and Gifts

• 【2mins Rapidly Heating Up】: Built-in ceramic PTC thermistor heater with 60W to ensure 1-2 minutes rapid heating and keep a constant temperature at....
• 【Convenient Kickstand】: The stand makes it a pleasure to set it down between uses without accidentally burning anything.
• 【No Drips and Leakage】: no dripping, no sloppy overflow when triggering.
• no need for a drip catcher which also saves on the space you need for....
• 【Improved Trigger】: POM & Nylon material combination achieves the goal of mute effect.
• 【Durable and Safe Body】: The body is made of engineering material(PA6 Nylon+30% Glass Fiber). There's several vents on both sides so it doesn't....

Thetford (618548 Thermistor Assembly

• 003cb003ePrice For:003c/b003e Each 003cb003e Thermistor Type:003c/b003e NTC 003cb003e Resistance:003c/b003e 5ohm 003cb003e Thermistor Tolerance:003c/b003e -15% to +15% 003cb003e Thermistor Case Style:003c/b003e Radial Leaded 003cb003e No. of Pins:003c/b003e 2 003cb003e Dissipation Constant:003c/b003e 32.4mW/°C 003cb003e Leaded Process Compatible:003c/b003e Yes 003cb003e Mounting Type:003c/b003e Through Hole 003cb003eRoHS Compliant:003c/b003e Yes.

8577274 Thermistor for Whirlpool Dryers by PartsBroz - Replaces WP8577274, AP6013514, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, WP8577274VP

• ✅ PART NUMBER 8577274: The thermistor is a high-quality exact replacement for part numbers WP8577274, AP6013514, 8577274, 3390292, 3406294, 3976615, 772546, ER8577274, PS11746740, and WP8577274VP..
• ✅ FOR WHIRLPOOL DRYERS: Use the part to fix select Whirlpool, KitchenAid, Kenmore/Sears, and Maytag dryers. Check your dryer manual or reach out to us to confirm compatibility with your model..
• ✅ FIXES COMMON PROBLEMS: Dryer on the fritz? Replacing the thermistor, which regulates temperature in your dryer, can fix dryers that don’t produce enough heat, don’t start, or shut off too soon..
• ✅ SIMPLE DIY FIX: Remove a faulty thermistor and install this new one in under 20 minutes. Helpful tools include a 1/4-inch nut driver, a small flathead screwdriver, and a 1/4-inch socket and ratchet..
• ✅ HIGH-QUALITY PART: Designed to last, this thermistor meets or exceeds all original manufacturer specifications for performance and fit..

279973 & 3392519 & 8577274 Dryer Thermal Cut Off Fuse Kit with Thermistor Control and Thermal Fuse Replacement Part fit for Whirlpool & Kenmore Dryers

• ✅Package Includes: 1 x 279973 Thermal Fuse & Thermostat with Instruction Sheet, 1 x 3392519 Thermal Fuse, 1 x 8577274 Thermistor Control..
• ✅279973 Thermal Fuse & Thermostat – Dryer high limit thermal fuse and high limit thermostat kit. Includes instructions..
• ✅3392519 Thermal Fuse – Dryer non resettable thermal fuse, two 3/16″ wire terminals. This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running..
• ✅8577274 Thermistor Control – Dryer thermistor temperature sensor..
• ✅Replaces Part Number – Thermal Fuse & Thermostat 279973 3391913 3404151 3404152 3977395 8318314 897710 AP3094323 PS334387 EAP334387. Thermal Fuse 3392519 WP3392519 3388651 694511 80005 ET401 G4AP0500 3392519 PS11741460 AP6008325 2986 EAP11741460. Thermistor Control 8577274 WP8577274 3390292 3406294 3976615 772546 8577274 1181075 AP6013514 PS11746740 EAP11746740. the replacement part is a direct replacement for your dryer..
• ✅Buy with Confidence – Order from KONDUONE, you can return or exchange within 3 months, true worry-free shopping experience. If replacement part ever fails on your Dryer simply con....