Reviews Prototyping Tools

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) Parallel Adjoined Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

sb components Breadboard Breakout for Raspberry Pi Development Expansion Board Module Breakout Breadboard Adapter for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero and Zero W, Raspberry Pi Breadboard Breakout

  • Supports all Raspberry Pi models such as 4B/3B+/3B/2B/B+/A+/Zero and Zero W.
  • No tools or soldering required for installation..
  • Raspberry Pi to breadboard prototyping made easy..
Check Stock

Polly Plastics Moldable Plastic Pellets for Cosplayers and Hobbyists in EZ Grip Jar with Idea Booklet 10 oz

  • HEAT & CREATE – Melt our moldable plastic pellets with hot water (>150F) and mold to any shape you like, by using your hands or using tools..
  • STRONG & REUSABLE – Plastic pellets can be re- melted again and again so you can build, reshape and add to your work as often as needed. Paint it,....
  • IDEA & INSTRUCTION BOOKLET INCLUDED – Learn the many ways you can use our moldable plastic with our 12 page color booklet..
  • MAKE, MEND & MODIFY – Use it for all types of crafts, art projects, home repair, model making, prototyping and more. No need for extruders, molds or....
Check Stock

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

Polly Plastics Moldable Plastic Pellets for Cosplayers and Hobbyists in EZ Grip Jar with Idea Booklet (35 oz)

  • HEAT & CREATE – Melt our moldable plastic pellets with hot water (003e150F) and mold to any shape you like, by using your hands or using tools..
  • STRONG & REUSABLE – Plastic pellets can be re- melted again and again so you can build, reshape and add to your work as often as needed. Paint it, drill it, cut it or attach it to something else..
  • IDEA & INSTRUCTION BOOKLET INCLUDED – Learn the many ways you can use our moldable plastic with our 12 page color booklet..
  • MAKE, MEND & MODIFY – Use it for all types of crafts, art projects, home repair, model making, prototyping and more. No need for extruders, molds or epoxy systems..
Check Stock

REXQualis 840 Pieces Breadboard Jumper Wire Kit with 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • Package Includes: Contains 840 pieces U shape preformed breadboard jumper wires, 6 individual clamshell containers each holding 140 pieces jumper....
  • 14 Different Lengths: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm, meet your various experimental....
  • Easy to Use: Each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard, make prototyping on a breadboard....
  • Wide Application: with variety of sizes and color design, these breadboards wires are ideal for use with any breadboard, prototyping, prototype....
  • We have always cared about the customer experience and improve the product function details, and also provide quick-responding technical support..
Check Stock

Jameco Valuepro 830-Point Solderless Breadboard 6.5 x 2.125 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-202-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 3220-Point Solderless Breadboard 7.3 L x 7.5 W 0.1 Spread Ideal for Prototyping and Classroom Projects - WBU-208-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 2390-Point Solderless Breadboard 6.9 L x 5.8 W 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-206-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Disposable Scalpels No.11 with Plastic Handle, High Carbon Steel, Individually Foil Wrapped, Sterile, Box of 10

  • ...ades #10 Round (used for dermaplaning), 10 Sterile carbon steel blades number #11 (used for extractions), 1 Each (#10 #11 #15) Sterile Stainless Steel Disposable Scalpel Blades (Used for dermaplaning), 1 Standard No. 3 blade handle (Used with Individual Blades).
  • ✅ A TON OF OTHER USES - mycology, comedones removal, prototyping electronics, model making, wood and clay sculpture, desktop work, small cuts and trimming, biology projects in school and labs, arts and crafts, trimming, gardening, vinyl cuts, wood projects, medical procedures, dissection, suture and surgery practice, scalpel for skin, debridement.
Check Stock

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

JAMECO VALUEPRO - WBU-204-R Jameco Valuepro 1660-Point Solderless Breadboard 6.5 L x 4.3 W 0.1 spread Ideal for Prototyping and Classroom Projects - 20774

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing..
Check Stock