Reviews Prototyping Enclosure

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) Parallel Adjoined Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

REXQualis 840 Pieces Breadboard Jumper Wire Kit with 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • Package Includes: Contains 840 pieces U shape preformed breadboard jumper wires, 6 individual clamshell containers each holding 140 pieces jumper....
  • 14 Different Lengths: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm, meet your various experimental....
  • Easy to Use: Each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard, make prototyping on a breadboard....
  • Wide Application: with variety of sizes and color design, these breadboards wires are ideal for use with any breadboard, prototyping, prototype....
  • We have always cared about the customer experience and improve the product function details, and also provide quick-responding technical support..
Check Stock

Jameco Valuepro 830-Point Solderless Breadboard 6.5 x 2.125 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-202-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 3220-Point Solderless Breadboard 7.3 L x 7.5 W 0.1 Spread Ideal for Prototyping and Classroom Projects - WBU-208-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 2390-Point Solderless Breadboard 6.9 L x 5.8 W 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-206-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

JAMECO VALUEPRO - WBU-204-R Jameco Valuepro 1660-Point Solderless Breadboard 6.5 L x 4.3 W 0.1 spread Ideal for Prototyping and Classroom Projects - 20774

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing..
Check Stock

KEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects

  • Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
  • The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
  • Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
  • Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
  • MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check Stock

StarTech.com eSATA Enclosure - for 3.5in SATA HDD - USB 3.0 / eSATA - Trayless - Metal - External Hard Drive Enclosure - HDD Enclosure

  • Easily connect and hot swap 3.5 in. SATA III hard drives, through eSATA or USB 3.0 with this trayless hard drive enclosure.
  • Access your files how you prefer with support for USB 3.0 and eSATA.
  • Simple set up with plug-and-play functionality.
  • With a sleek, metal design this hard drive enclosure is a perfect desktop companion for your Mac or PC.
  • Supports SATA I, II, and III (up to 6Gbps) / eSATA enclosure / Hard drive enclosure / External hard drive enclosure / HDD enclosure / 3.5 hard drive enclosure / SATA enclosure / USB 3.1 enclosure / 3.5 SATA hard drive enclosure / External HDD enclosure / SATA drive enclosure / External SATA enclosure / 3.5 external hard drive enclosure / Hot swap case / HDD case / Hard drive enclosure USB 3 / eSATA hard drive enclosure / SATA external hard drive enclosure / SATA to USB enclosure / 3.5 hard drive enclosure USB 3 / Removable hard drive enclosure.
Check Stock

DEYUE 40PCs PCB Double-Sided Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects

  • 100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering.
  • 0.1" hole spacing for DIP integrated circuits and headers..
  • THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions.
  • MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use.
  • Double sided board with plated-thru holes allows components to be easily soldered to either side of the board.
  • THE FLEXIBILITY OF HAVINg CHOICES  ★  Great assortment with variety of size and perfect for quickly prototyping stackable circuits.
  • PACKAGE COMPONENT  ★  40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs.
  • 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner.
Check Stock

StarTech.com 3.5" External Dual Hard Drive Enclosure Raid USB-C and USB-A SATA 6Gbps 2 Bay USB 3.1 SSD/HDD Enclosure (S352BU313R)

  • Create high performance external storage with a dual SATA HDD RAID array through USB 3.1 (10Gbps).
  • 2-Bay 3.5" HDD Enclosure with RAID support, including RAID 0, RAID 1, JBOD and SPAN (BIG).
  • 2-Bay hard drive enclosure supports SATA I/II/III (up to 6Gbps) and USB 3.1 Gen 2 (backward compatible with USB 3.0 / USB 2.0).
  • Dual 3.5" HDD/SSD/SSHD External Drive Enclosure provides high speed, high-capacity external data storage for your USB-C or USB-A laptop or computer (both USB-C and USB-A cables included).
  • Solid aluminum enclosure with metal hard-drive mounting tray and built-in fan to assist in heat dissipation / 2-drive 3.5" HDD/SSD RAID enclosure / 2-bay 3.5in enclosure / 2-bay 3.5" HDD RAID enclosure / 2-bay 3.5" SSD enclosure / Dual 3.5" HDD enclosure / Dual bay SATA enclosure / 2-bay 2.5" RAID enclosure.
Check Stock

ORICO 4 Bay HDD Raid Enclosure USB External Hard Drive Enclosure Aluminum Magnetic SATA III Disk Storage Case Tool-Free for 2.5/3.5 SSD HDD Support 64TB(4X16TB) for Data Backup NAS Expansion NS400RU3

  • 【4 Bay Raid External Enclosure】-- The 4 bay hdd enclosure can support about 7 kinds of raid modes, you can use the raid function to combine your hard drive or improve your data transmission rate. More raid modes the 4 bay enclosure supports, more convenient in your daily work and life..
  • 【64TB Large Capacity Enclosure】-- The 4 bay sata enclosure can fits 3.5inch and 2.5inch with a bracket SATA SSD and HDD, and each slot can support up to 16TB hard disk, altogether 64TB, good for data storage and nas expansion for enterprises, self-media workers and who works with much data transfer. You can also use it to store large games, work materil, your family memories and backup of camera video..
  • 【Faster Enclosure, 1GB Files for 3 Seconds】-- By adopting high quality chip controller, the drive bay enclosure supports SATA III protocol, the data transfer rate can reach up to 5Gbps(MAX), it can backward compatible with USB2.0/1.0, very stability and easy to carry the huge data interaction of enterprise, reduce the delay..
  • 【Fast Cooling Hard Disk Enclosure】-- The drive bay enclosure is make by 4mm thickness aluminum board body and magnetic enclosure door. There's a cooling fan which the diameter is 92mm built in the usb drive bay enclosure, with a honey....
Check Stock