Reviews Protective Laminates

DAILISEN Self Adhesive Floor & Door Flat Transition Strip Vinyl Floor Edge Trim Laminate Floor Gap Covering Joining Strip 78.7in L x 1.96in W Grey Wood Grain

  • 【Flooring Strips Material and Size】:Made of environmentally friendly flexible PVC material, length: 2m/78.7in, width: 5cm/1.97in..
  • 【Self-adhesive Installation】: The back of the floor gap covering strip is affixed with strong double-sided acrylic tape, which can be installed by tearing off the surface protective film..
  • 【Product application】: The product is mainly used for covering the gaps between wood floors and wood floors, between laminates and laminates, and between wood floors and tiles to prevent floor gaps from expanding and floor movement..
  • 【Installation steps】: Please clean the floor before installation to keep the floor clean. Then peel off the protective film on one side of the tape and install it in the designated position. Press the floor strips while removing the tape until the installation is complete. There is no need to drill holes in the floor or tile during installation, and it will not damage the floor or tile. Can be freely cut as needed..
  • 【Tip】: 4cm wide floor strips are recommended to cover gaps within 1cm, and 5cm floor strips are recommended to cover gaps within 1.5cm. Not recommended for use as a threshold transition strips. During transportation, the tape may be blistered, but it will not affect the use. If y....
Check Stock

Fellowes Laminator Proteus 125 Laminating Machine (5709501) , White

  • Professional six roller laminator for multiple users with high volume needs.
  • Laminates pouches up to 13-Inch wide and 10mm thick.
  • Laminates documents and mounting board up to 1/8-Inch thickness.
  • Heats up in 3 minutes, laminates in about 15 seconds.
  • Speed and temperature settings adjust for individual preference.
Check Stock

THINGAMEJIG QT25.SCRIB Scribing Tool

  • Scribes laminates, painted items, stone, soft metals , timber,.
  • scores the surface and prevents chipping or breakouts on laminates metrical..
  • accurate every time due to locking nut and easy adjustment.
Check Stock

Vic Firth Heavy Hitter Quadropad - Small (HHPQS)

  • Enables quiet practice and an authentic playing experience for marching tenors.
Check Stock

Vic Firth Laminate for Quadropad Large

  • Heavy duty, replaceable mylar laminates simulate the response and feel of a high-tension marching drum.
  • Replacement laminates for Vic Firth Quadropad.
Check Stock

UT Wire 5'Cable Blanket High Capacity Low Profile Cord Cover and Protector, Brown

  • THE MOST COMPACT LOW-PROFILE CORD PROTECTOR - Ultra Slim Low profile Floor cord and wire cover is intended for all types of surfaces such as concrete, tile, stone, vinyl, wood, laminates, and short cut pile carpet etc to keep floors safe from tripping hazards while being clean and tidy of unsightly clutter..
  • ADHESIVE-READY - Cable Blanket comes ready for installation. Simply peel off the pre-attached adhesive and cover your desired cords and stick to the floor..
  • FLEXIBLE CAPACITY - With a flexible protective capacity the Cable Blanket allows you to fit up to 10 ethernet or 5 power strip cables..
  • SOFT & FLEXIBLE - Can easily be cut to any desired length with a sharp pair of house-hold scissors..
  • PRODUCT DIMENSIONS: 60" L x 4" W x 0.125" H.
Check Stock

UT Wire 15FT Cable Blanket High Capacity Low Profile Cord Cover and Wire Protector - Brown

  • THE MOST COMPACT LOW-PROFILE CORD PROTECTOR - Ultra Slim Low profile Floor cord and wire cover is intended for all types of surfaces such as concrete, tile, stone, vinyl, wood, laminates, and short cut pile carpet etc to keep floors safe from tripping hazards while being clean and tidy of unsightly clutter..
  • ADHESIVE-READY - Cable Blanket comes ready for installation. Simply peel off the pre-attached adhesive and cover your desired cords and stick to the floor..
  • FLEXIBLE CAPACITY - With a flexible protective capacity the Cable Blanket allows you to fit up to 10 ethernet or 5 power strip cables..
  • SOFT & FLEXIBLE - Can easily be cut to any desired length with a sharp pair of house-hold scissors..
  • PRODUCT DIMENSIONS: 180" L x 4" W x 0.125" H.
Check Stock

BOSCH U503 3-Piece Assortment U-shank Jig Saw Blade Set for Laminate Flooring

  • Includes two U1BIF special for laminates, and one U1AOF special for scrolling in laminates.
  • Precisely ground teeth for clean, fast cuts in laminate flooring and other abrasive materials.
  • U-shank design fits some professional and most consumer jig saw brands.
Check Stock

FastCraft 14pc Multi Tool, Oscillating Tool Kit, PRO Saw Model 86225-1 (5.0Amp PEAK GUARANTEED POWER Rated 2.4A Keyless Blade Change 6 Speeds 3-4 Angle Cutting + 13pc Blades/Carbide PRO Grade - BULK PACKAGING [No Box] FastCraft the High End Brand at Costco

  • ... metals like cast iron, and fiberglass.
  • --- (2) Bi-metal steel blade (wood/plastic/soft metal) - Best for cutting: hard/soft wood, demolition (nail-embedded wood), sheet metal and pipe cutting, plastic, drywall.
  • (1) 3-1/2" Bi-metal half moon blade (wood/plastic/soft metal) - Best for cutting: soft metal, wood, wood laminates, softer plastics, drywall, carpet,.
  • --- (2) 3-1/2" HCS SK5 steel half moon saw blades (wood/plastic) - Best for cutting: wood, wood laminates, softer plastics, drywall, carpet, (5) HCS SK5 steel saw blades (wood/plastic) - Best for cutting: wood, wood laminates, softer plastics, drywall, carpet.
  • (2) HCS sk5 steel E-Cut saw blades (wood/plastic) - Best for cutting: wood, wood laminates, softer plastics, drywall, carpet. Bulk Packaging [No Clamshell Packaging].
Check Stock

CMT P10080 5/8\ Bore ITK Melamine & Ultra Finish Saw Blade, 10\ x 80 Teeth

  • For crosscuts, fine finish on two-sided laminates without using scoring blades.
  • Use on radial arm, miter and table saws for cutting wood, moldings, melamine, laminates, chipboard.
  • 0.094 kerf thickness, 0.063 plate thickness, 10Degree hook angle.
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed.
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion.
Check Stock

Yakamoz 1/2\ Shank Panel Top & Bottom Bearing Flush Trim Pattern Router Bit Woodworking Cutter

  • Shank Diameter: 1/2 Inch, Cutting Diameter: 3/4 Inch, Blade height: 2-1/2 Inch.
  • Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects..
  • Carbide Tipped - Micro grain grade provides increased strength and utmost resistance.
  • Use on hand-held routers, laminate trimmers, and table-mounted portable routers..
  • Great performance on all hardwoods, softwoods, plastic laminates and veneered plywood..
Check Stock

BOSCH T101AO 5-Piece 3-1/4 In. 20 TPI Clean for Wood T-Shank Jig Saw Blades,Silver

  • Pointed teeth reduce splintering on both sides of the workpiece.
  • For use on double-sided laminates, laminated substrates, mdf, hard and soft woods, and plywood.
  • 20 TPI pointed tooth profile and narrow blade body optimized for clean, curved cuts and scrolling.
  • T-shank design eliminates the set-screw mounting hole for longer life and better durability.
Check Stock

6.56 FT PVC Carpet & Floor Edging Trim Strip-Threshold Transition Strips-Self Adhesive-Suitable for Threshold Transitions with a Height Less Than 5 mm Black

  • Thresholds Transition Strip/Edging Trim Strips: Threshold transitions and edge trims for carpets and thin floors, laminates..
  • Self-adhesive: The product comes with double-sided tape, which can be pasted and installed by tearing off the protective film on the back of the tape..
  • Dimensions: Length 2m, Width 35mm, Height 7mm, suitable for sill transition and edge trimming between 4.5 - 5mm height..
  • Material: Flexible PVC material, easy to install, no need for screw drilling, easy to cut..
  • Reminder: Please measure your threshold height carefully before purchasing, please make sure that the threshold height is in the range of 4.5 - 5mm. Before installation, please ensure that the ground is clean, flat and dry, and do not install on uneven surfaces..
Check Stock