Reviews Propeller Shaft Support Bearing

DJI Mavic 2 Low-Noise Propellers for Mavic 2 Zoom, Mavic 2 Pro Drone Quadcopter Accessory Replacement - Part 13 (Bundle: 2 Pairs)

  • AB forward and reverse propellers，is suitable for motors with shaft diameter of 0.8MM, such as 614,615,716, etc. Please note that 716 has two kinds of motors, one with shaft diameter of 0.8mm and the other with shaft diameter of 1.0 mm. Our mini propeller is only suitable for motors with shaft diameter of 0.8MM, and the propeller blades are 46 mm long..
  • Mini propeller, durable and light，Made of nylon material,Well-made and well-balanced, strong toughness and not easy to break..
  • Quick installation and disassembly without using other tools. When installing, you need to cross the same two together. If the A side is installed on the B side, it can't fly. It needs to be readjusted and the size needs to be the same as your own product before it can be used..
  • This is a propeller with a length of 46 mm/1.8 inch, and its central shaft hole is 0.8 mm/0.03 inch. It needs to be accurately matched to the size of the central hole of your product and the length of the propeller blade before it can be used correctly. Please carefully match the specifications you need..
Check Stock

Bettomshin Drive Shaft w Propeller and Universal Joint for RC Boat, L200mm Shaft, L150mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

  • 【Parameters】- Shaft length: 20cm/7.8".
  • Suit for motor shaft diameter: 3.17mm/0.12".
  • 【High Quality】- RC boat propeller shaft kit is made of stainless steel,corrosion-resistant,wear-resistant and good sealing..
  • 【Feature】- There is bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in whirl..
  • 【Application】- The propeller shaft is suitable for the different types of boats ,simulation compatible with DIY RC model, such as RC boat toy ,RC submarine and so on..
Check Stock

BACOENG Stainless Steel 115 Volt Inline Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 1/2” x Outlet 1/2” MPT

  • SPECIFICATIONS: 1/2inch MPT Inlet&Outlet.
  • FDA FOOD COMPLIANT - Stainless steel is used in professional setups because it is a durable, food-grade metal that can withstand caustic chemicals and can be effectively sanitized..
  • EASY TO USE: Prime by running liquid through pump prior to turning on.
  • The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
  • Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
  • MATERIAL PERFORMANCE: Pump extraction medium temperature changes should be controlled within 100℃, high temperature does not exceed 120℃. Shaft bearing adopt special ceramics material which make it characterize strong resistance for abrasion and corrosion..
  • MAGNETIC: Fully sealed pump motor with connecting magnetic shaft and magnetic propeller.
  • Magnetically coupled for enhanced operation.
Check Stock

Electric Trolling Motor w/Battery Indicator Propeller Hanger Bracket Of Outboard Engine Aluminum Alloy Propeller Propeller For Outboard Engine Marine Motor Propeller

  • Strong and Durable: Stainless steel propeller outer tube, steel shaft bearing and aluminum alloy blade are very strong and wear-resistant, ensuring a long service life..
  • Multi-function Electric Drill: In addition to being the power source for the propeller, configured with a wide range of drill heads, the electric drill can be used alone for drilling work..
  • Good Heat Dissipation: Multiple cooling holes on the electric drill head provide excellent ventilation and heat dissipation for consistent performance over long periods of use..
  • Powerful Thrust: The electric drill with a maximum torque of 2.6 N.M provides 25 lbs of thrust to the boat for stable high-speed travel. A streamlined three-blade propeller reduces drag and balances thrust for optimum performance..
  • Flexible Direction Control: The twin gear design and reverse gear function allows for different steering needs for flexible directional control of travel..
Check Stock

iFlight 4pcs XING 2306 2450KV Brushless Motor 4S for QAV FPV Racing Drone Quadcopter (Unibell)

  • New version unibell XING 2306 2450KV Motor provides the most incredible power and thrust in the lightest weight,sturdy structure and high-quality materials make iFlight XING performs like a beast.
  • The iFlight XING series motor is characterized by support 4S. The 4mm Titanium alloy shaft and high-quality N52H magnets surrounded by high-temperature resistant windings.
  • These 4 pack 2306 brushless motor used standard M3 16mmx16mm mounting pattern at the bottom,160mm cable length for different frames and setups.
  • There is a non-slip design on the contact surface between the motor and the propeller to increase friction and to improve durability.
  • Multiple heat dissipation holes are designed to dissipate heat continuously.
  • Each motor has been dynamic balanced, crush resistant damping bearing, eliminate vibration effectively.
Check Stock

A2807 Brushless Motor 1500KV RC Electric Motors 6S Drone Motor for RC Plane FPV Airplane Quadcopter & Fixed Wing

  • Precision balanced rotor, 52H level magnet and 14 pole 12 slot high torque motor design, more efficiency, smoothly and stable.
  • Equipped with CNC 6061-T6 aluminum bell, high RPM imported bearing and high temperature resistant copper wire winding, more strong, durable and long life.
  • The shaft diameter of electric motor is 4mm, motor mount is 19*19mm(M2*4), which is suitable for 7 inch propeller.
  • A2807 brushless motor is characterized by support 4S, which is widely used for FPV, drone, quadcopter, airplane, RC plane, fixed-wing models and so on.
  • Motor size is 1.3 x 0.79in (33.6 x 20mm), cable length 18#AWG 220mm. Package include 4 x A2807 brushless motor and a set of accessories.
Check Stock

FERRODAY Magnetic Drive Pump Wort Pump Food Grade High Temperature Stainless Head Magnetic Pump 15RM with 1/2"NPT thread Home Brew

  • 【Solid Magnetic Pump】 : Fully-sealed magnetic pump, motor with connecting the magnetic shaft and magnetic propeller, all magnetically coupled for enhanced operation. This is a High output volume and quiet operation industrial/ home brew equipment. Great heat resistant up to 120℃/ 248℉..
  • 【Safely Transfer Liquid】 : Transferring liquids is an important part of any brew operation, and the most easy and safe way to transferring liquids is to attach this magnetic pump, the propeller will magnetically circulates liquids for you. Please note: Moving giant vessel with hot wort yourself is not safe..
  • 【Life Time Service】We are committed to offer you high quality product as well as superior service! Please feel free to tell us if any problems, we would try our best to satisfy you. Lifetime technical support..
  • Perfect for transferring and circulation..
  • 【Quiet and Efficient】 : The pump’s main shaft is separated from the impeller, which has damping and anti-Vibration function, aim to reducing the influence of motor vibration on the pump. Realized a high efficiency smooth running, and excellent quiet circulation..
  • 【Easy to Use】 : Prime by running liquid through the pump prior to turning it on.
  •  The liquid travels from the bottom of the valv....
Check Stock

TBVECHI 2-Stroke 3.5 HP Outboard Motor Fishing Boat Engine Outboard Engine CDI system

  • 【Main Parameters 1】Overall length: 83cm/32.68inch. Overall widteh: 36.5cm/14.4inch. Overall height: 22cm/8.7inch. Transom height: 42cm/16.5inch. Short shaft: 40cm/15.7inch..
  • 【Main Parameters 2】Full throttle perating range: 4000-5000r/min. Maximum output:2.5kw(3.5HP). Speed:12km/h(four people). Type:2-stroke. Propeller mark:7-1/45-A(inch). The engine and the propeller ratio:2:1. Fuel to oil ratio: 35:1. Gear ratio: 27/13..
  • 【Warm Note】The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed..
  • 【About the Noise】All the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon..
  • 【♥ Best Services】Sent from the US and can be delivered within 4-7 days. If you have any questions or quality issue, please feel free to contact us. We will do our best to help you solve the problem..
Check Stock

5010 EEE V2.0 370 KV MAD COMPONENTS brushless Motor for The multirotor Quadcopter¡­

  • Maximum hollow design,ultralight weight,fast heat dissipation. Unique stator design, 24N28P configuration.
  • Standardized mounting hole position,compatibility with all kinds of rack. Through the simulation of magnetic flux density and magnetic envelope, the motor has low energy consumption and high efficiency.
  • Durable EZO imported bearing, more stable rotation, more resistant Using high performance arc magnet, the performance is improved by 5%.
  • MAD 5010 EEE brushless motor is the single rotor load of 800-2000g, with 14-24 “carbon propeller. Support Li-ion 6S-12S. The largest thrust of single rotor is up to 5000g.the weight of motor is 158g..
  • Maximum Power 515W Maximum Thrust 3403g Maximum Torque 1.03N*m Recommend ESC AMPX 40A PRO ESC Recommend Propeller FLUXER 15′-20′ Propeller Recommendation 900g-1500g(15′-20′).
Check Stock

Newport Vessels Pontoon-Series 86lb Thrust Saltwater Electric Pontoon Trolling Motor with Deck Mount Bracket & 55 Shaft

  • Mount Bracket: Nearly indestructible mount bracket can be located anywhere on your pontoon or deck boat. Latch door allows motor to be easily removed....
  • Shaft: The 55 Inch Long Fiberglass Shaft is both durable and adjustable.
  • Battery Cables: 66" Battery Cable Leads are made from marine grade copper with tin coating for corrosion resistance, w/ ring battery connectors.....
  • Propeller: Includes a fiberglass reinforced 3 blade propeller for tough environments and all day trolling.
  • Includes: 50 Amp Circuit Breaker, Propeller, Mount Bracket, Installation Hardware.
Check Stock

Gator Head 5-6 Inch Real Alligator Head By Hinterland Trading by Alligator King

  • Be made of resin material, simulates the crocodile head and looks more realistic, Can be used to scare people, or can simulate crocodiles to help....
  • 2.4GHz transmitter, you'll never get any radio interference with this RC boat. 2CH operate, moving forward and backward, turn left and right,....
  • The crocodile head can be disassembled and the ship can be controlled independently. Speed: 10km/h. Charging time: About 2-3h. Use time: About 20 mins.
  • Double Propeller / Water Induction Propeller Shaft, When the propeller shaft touches the water, teh boat can be quickly turned on after sensing the....
  • The charging port is equipped with a waterproof rubber plug, and the bottom of the boat is fully enclosed and waterproof..
Check Stock

86 LBS Thrust Trolling Motor, 24V Transom Mounted Saltwater Electric Outboard Motor 8 Speed w/LED Battery Indicator and Telescoping Handle for Kayak, Inflatable Fishing Boats

  • POWERFUL ELECTRIC TROLLING MOTOR - This 86 lbs thrust 24V motor provides excellent power and efficiency for any boater. It features a 28-inch shaft, a 10 points LED battery meter, a 6 Inch telescoping handle, and 3 blade propeller. The shaft angle and propeller depth can all be adjusted and locked into place when needed..
  • ERGONOMIC EXTENDABLE HANDLE - 8 speeds adjustable tiller (5-sp forward & 3-sp reverse) puts total control at your fingertips for a smooth and easily controlled ride. Also, the 6-inch telescoping handle allows you to get easy and comfortable operation of your electric boat motor..
  • 28-INCH FIBERGLASS COMPOSITE SHAFT - High tensile strength and corrosion resistance adjustable shaft allow for proper depth placement in different water conditions. You can set it to the desired height to comfortably steer by sitting or standing. 28” shaft is more suitable for sitting..
  • 10-POINT LED BATTERY INDICATOR - There is a 10-level LED indicator display of the battery power on the top of the propeller, allowing you to check the power condition at any time and prepare for charging in advance to avoid running out of pow....
Check Stock

E-cowlboy Bearing & Seal Kit with Tool Fit Whirlpool W10435302 & W10447783 Washer Tub Bearing Installation & Removal Tool Complete Package (19 Pcs)

  • Great Compatibility — Works with some Whirlpool Washer / Kenmore Washer / Combo Washer / Maytag Washer (Please be sure that your washer model should match on our product description listing below).
  • Superior Quality — Advanced heavy duty steel process, durability, high precision and hardness. High quality aftermarket shaft, bearings and seals provide a much longer service life. No noises and no leaks..
  • Benefits — Comes with everything required to remove, fix and replace the old parts. Replace bearings and use the PVC seal to reseal the installation. Grease and adhesive kits to ensure parts move smoothly during and after installation..
  • Includes — Tub Bearing Shaft & Seal Kit: Drive Shaft / Spacer Tube / Tub Seal / Top Bearing / Washer / Shaft Nut / Bottom Bearing / Threadlocker / Adhesive and Grease / Tub Press Tool Kit: Top Press Nut / Top Bearing Press / Press Rod / Bottom Bearing Press / Thrust Bearing / Shaft Nut / Locking Bar / Steel Pole and PVC Tube..
  • 100% Satisfaction Guarantee — If you’re not 100% satisfied with E-cowlboy’s washer tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock