Reviews Profile Brazing Cutter

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

Yonico Top Bearing Slot Cutter Router Bit 1/8-Inch x 5/16-Inch 1/4-Inch Shank 14914q

  • This top bearing slot cutter router bit routes a 1/8" x 5/16" slot. The overall diameter is 1-1/4" and 1/4" shank..
  • Cut slots and grooves for joinery and other general use.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • For use on table mount and handheld router.
  • Silver induction brazing for maximum strength and durability.
Check Stock

Yonico 13141 Thumbnail Table Edge Router Bit with Large 1/2-Inch Shank

  • Add a thumbnail profile edge to any table top.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • For use on table mount and handheld router (Up to 2-1/2" diameter).
  • Silver induction brazing for maximum strength and durability.
Check Stock

Yonico Cabinet Door Edge Router Bits Classical Euro Style 1/4-Inch Shank 12164q

  • Add a classical ogee edge to your drawer and cabinet door fronts using this Yonico 12164 edging Router bit. 1/4" Shank..
  • Add a beautiful profile to door and drawer fronts.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • For use on table mount and handheld router.
  • Silver induction brazing for maximum strength and durability.
Check Stock

Yonico Lock Miter Router Bit 45 Degree - Up to 3/4-Inch Stock 1/2-Inch Shank 15127

  • Join boards at a 90 degree angle with an interlocking profile for a perfectly aligning joints.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • For use on table mount router only - not recommended for use with MDF or plywood.
  • Silver induction brazing for maximum strength and durability.
Check Stock

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
  • Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
  • Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
  • Centurion series regulators with Protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate Gas control.
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

  • Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
  • Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
  • T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
  • Sil-flo is not recommended for ferrous metals such as iron or steel.
Check Stock

Bosch Professional 2607017476 30-Piece Set Router Bit Set for Wood for Router with 1/4 Inch Shank

  • 30 piece cutter set for fine work in soft and hard wood and wood composites..
  • Perfect choice for all carpenters, carpenters, interior decorators and other builders.
  • Long service life due to carbide cutting edges and manufactured according to safety standards DIN EN-847.
  • For routers with 1/4 inch tool holder of all power tool brands.
  • 15 accessories including flush cutter, chamfer cutter, round cutter, profile cutter, and much more - see product description.
Check Stock

Hot Max 24184 Aluminum Brazing Flux for Welding

  • Formulated specifically for torch brazing aluminum.
  • Normally used with 4047, 4043, or 1100 brazing filler alloy.
  • Can also be used for furnace and automatic flame brazing operations.
Check Stock

Lucas-Milhaupt 99088 Flux Cored Aluminum 822

Check Stock

J.W. Harris Company 40022 Stay-Silv White Brazing Flux

  • It is a powder flux formulated for brazing gold and silver..
  • Jar of welding powder brazing flux powder welding cast consumables jewelry weld repair supply.
  • There are 250 grams in this jar, which will definitely meet your needs..
  • The powder melts at 700 degree centigrade.​.
  • Brazing powder improves the weldability of metal in the process of high temperature welding..
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock