Reviews Pro Lift Ton Low Profile Floor Jack

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

JEGS 80077-1 Replacement Rear Caster For JEGS 3-Ton Aluminum Jack (555-80077)

  • Fits JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack (555-80077).
  • Sold Individually JEGS 80077-1 rear caster is just one of the replacement parts offered for our 555-80077 professional low-profile 3-ton aluminum floor jack. Easily installed, the castor will help keep your jack mobile and safe..
Check Stock

BILT Hard Aluminum and Steel Floor Jack, Low Profile Hydraulic Racing Floor Jack with Dual Piston Rapid Pump, 1.5 Ton Capacity (3,000 lb) , Blue

  • ...ndustrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant..
  • Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground..
  • Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it..
  • Rapid Pump: The high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for controlled descents of your load from any handle position..
Check Stock

Jack Reacher

  • Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity.
  • Constructed of durable, high-strength steel.
  • Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height.
  • Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles.
  • Foam bumper on the handle helps protect your vehicle from damage.
Check Stock

BILT Hard 3 ton Aluminum Racing Steel Floor Jack with 2 Jack Stands Low Profile Hydraulic Dual Piston Rapid Pump 6000 lb Capacity Blue

  • Includes Two Double Locking Jack Stands: It comes with 2 Packages. The heavy-duty jack stands safely support up to 6000 lb., They are constructed with....
  • Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a....
  • Low Profile: The aluminum racing floor jack has a 3-ton/6,000 lb. lifting capacity with a 3-7/8 in. to 19-1/2 in. lifting range, it provides you with....
  • Easy Operation: The 3 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into....
  • Rapid Pump: The high-performance low profile car jack has an exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It....
Check Stock

JEGS 80077-2 Replacement Saddle Pad For JEGS Professional Low-Profile 3-Ton Alum

  • For JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack....
  • Sold Individually The JEGS 80077-2 saddle pad is a replacement for the JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack 555-80077. To prevent slippage this pad is made from flexible rubber with a dimpled surface. Situated in the center of the saddle, this piece also provides a padded surface to protective bodywork and....
Check Stock

Jackco 3 Ton Low Profile Aluminum Racing Floor Jack with 3 Ton Aluminum Jack Stands

  • 3 Ton Aluminum Low Profile Racing Jack: Aircraft billet aluminum construction Dual Plunger for quick lift.
  • 3 Ton Aluminum Jack Stands: Aircraft-grade aluminum Lightweight - less than 5 lbs. each 6 adjusting positions from 9.5” to 15.25”.
Check Stock

Pro-LifT Hydraulic 1.5 Ton Trolley Jack Car Lift with Blow Molded Storage Case - 3000 LBS Capacity Orange

  • Pro-Lift PL2930 Floor Jack is a 1.5 Ton car jack with welded Steel frame construction for strength and duability. It gives you the ability to lift from 5-5/16 inches to 11-3/4 inches..
  • Hydraulic trolley jack is constructed with the heavy duty steel. It features the front wheels with the rear casters for the maneuverability. The large swivel saddle provides you with the easy jack positioning and user safety.
  • This 3000 Lbs trolley jack features an overload valve bypass system to prevent jack damage and user injury, and features the compact lightweight design with the carrier handle to easily transport from one location another..
  • In additional, this 3000 Lbs car jack is packed in a blow mold storage case, which gives you the ability to easy store in your garage or trunk when not in use..
  • This 1.5 Ton car jack is ideal for auto repair services in your home garage and on the road. In addition, it is covered with 1-Year warranty from the date of the purchase..
Check Stock

Heavy duty 3 Ton Floor Jack Low Profile Hydraulic Jack Steel Service Jack Quick Rise With Double Pump Quick Lift

  • 3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm).
  • Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue..
  • Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point..
  • Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle.
  • Low Profile jack complies with ASME PASE/2014 Safety Standard.
Check Stock

K Tool International 2 Ton Extra Low Profile Service Jack; Long Pump Handle, Dual Pump Pistons, Hydraulic Ram Protection, Heavy Duty Steel; KTIXD63105

  • [2 TON CAPACITY]- 2 ton capacity extra long low profile service jack for easy access under low ground clearance vehicles.
  • [LIFT RANGE]- Lift range from 2.75" to 24" provides users with variable lifting capabilities.
  • [LONG PUMP HANDLE]- 45.25" long pump handle for easy pumping under load.
  • [DUAL PISTONS]- Dual pump piston power unit raises saddle to maximum height in 8 full incremental pump strokes with no load.
  • [BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity and over extension of ram.
Check Stock

BIG RED AT830011LR Torin Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump, 3 Ton (6,000 lb) Capacity, Red

  • Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity.
  • Foam bumper on the handle helps protect your vehicle from damage.
  • Constructed of durable, high-strength aluminum and steel.
  • Dual piston quick lift pump allows you to easily raise the jack to the desired height.
  • Lifting range from 3-15/16″ to 18-5/16″ allows you can gain easy access under low-profile vehicles.
  • The aluminum floor jack is equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Convenient side handle makes it easy to carry.
  • Features a built-in safety overload system prevents use beyond load capacity.
  • Includes a limited 1 year manufacturer warranty.
Check Stock

3 Tons Aluminum Racing Floor Jack With Rapid Pump

  • Lift height of 3-1/4 in. to 20 in., ideal for low-profile vehicles to trucks and SUVs.
  • Ball bearing premium rear swivel casters for 360° mobility.
  • Rotating, removable jack saddle adapts quickly to lift accessories.
Check Stock

Torin T83505W Blackjack Hydraulic Low Profile Steel Racing Floor Jack with Single Piston Quick Lift Pump 3 Ton 6,000 lb Capacity Black

  • Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity.
  • Constructed of durable, high-strength steel.
  • Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height.
  • Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles.
  • Foam bumper on the handle helps protect your vehicle from damage.
Check Stock