Reviews Printed Pcm

Michigan Motorsports Knock Sensor Adapter for 1997-2004 LS1 LS6 Car to LS2 LS3 Knock Sensor

• Knock Sensor Adapter for 1997-2004 LS1 Car to LS2 Knock Sensor.
• This harness allows the dual-wire LS2 knock sensors located on side of the LS2 engine block to be plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars..
• PLEASE NOTE THAT IN ORDER TO USE LS2 KNOCK SENSORS IN A LS1 CAR YOU REQUIRE SPECIAL LS1 PCM SOFTWARE CHANGES OR A LS2 PCM..
• KEY FEATURES: Fully Plug and Play with the factory harness & sensors Military spec. high-temperature Teflon wire (same type used on oxygen sensors) 24" Length High-temperature (1200F) heat treated protective loom All connections crimped using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability..

LAUNCH OBD2 Scanner CRP129E – Engine/ABS/SRS/Transmission Diagnostic Scan Tool with Oil Service/EPB/TPMS/SAS/Throttle Body Reset (Red)

• ...ed DTC’s, Reset/Clear of DTC’s, 02 Monitor Results, Advanced OBD2 Data, Pending DTC’s, EVAP Test, Vehicle Information and Permanent DTC’s. Live OBD2 and manufacturer Extended OBD2 data can be viewed in text or graphical formats. Engine, Transmission, ABS and SRS data can be recorded, stored, played back and printed.
• ✔【Wi-Fi Update】+【AutoVIN+Manual VIN Read: The LAUNCH CRP129E obd2 scanner incorporates Smart AutoVIN technology for quick and accurate vehicle identification without having to manually select . (PS: some cars need to manual select ). Single-click【Vehicle Health Diagnostic Report can be stored, printed and shared via email. Use the “Feedback” feature to help build a solutions database available from LAUNCH. Live data graphing support up to 4 PID’s. Graphs can be separated, overlaid or merged..
• ✔【Extensive Coverage】: Abbas, Acura, Alfa Romeo, Audi, Bentley, Benz, BMW, BMW-Brilliance, Bugatti, Buick, Cadillac, Chevrolet, Chrysler, Citroen, Dacia, Daewoo, Dodge, Fiat, Fiat, Ford, Faking, General Motors (GM), Honda, Hyundai, Infiniti, Isuzu, Isuzu Thailand, Jaguar, Jeep, KIA, Lancia, Land Rover, Lexus, Lincoln, Maybach, Mazda, Mini Cooper, Nissan, Opel, Peugeot, Porsche, Renault, Rolls-Royce, Saab, Seat,....

OREI Digital to Analog Audio Converter - Optical SPDIF/Coaxial to RCA L/R with 3.5mm Jack Support Headphone/Speaker Output DA21

• Converts coaxial or optical digital audio input to analog stereo output over RCA and 3.5mm mini jack. Will not convert Dolby Digital Signal. Make sure to change to TV Output To PCM.
• Supports all popular sample rates including 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz, at up to 24-bit resolution.
• This Device will not convert Dolby Sound. It is only a converter not a Decoder. So make sure your device does not require Dolby conversion..
• TROUBLE SHOOT - If your getting a Clicking Sound - Most likely your TV output is not set to PCM. Please change it PCM. Or if your getting Screeching or No Sound - Most likely you are trying to decode Dolby Sound to Analog. You will need a DA34 or DA34X.
• INCLUDES DA21 Converter, Power supply, User Manual.
• KINDLY NOTE : The DA21 will only support PCM audio output mode.It doesn't support Dolby, DTS, 5.1ch or 7.1 ch audio signals..

HiFi DAC+Sound Card Pifi DAC + PCM5122 DAC I2S Interface Analogue Output Signal Digital Audio Card Compatible with Raspberry Pi B + a + 2B Raspberry Pi 3B (64-bit)

• Good performance: PCM5122 integrates a negative charge pump, and the output does not require a DC blocking capacitor.
• very good ability to suppress noise in the frequency band. Since the load support is as low as 1K, PCM510xA can drive a variety of parallel products..
• Ensure the continuity of signal impedance: Sound card Pifi DAC’s gold-plated RCV double clip and gold-plated 3.5 mm jack socket (recommended by amplifier). It is perfectly compatible with the official PI HAT size of the Raspberry Pi, based on the high gold plating process of the circuit board, and the arc line (high-end HIFI DAC adopts the arc line), which better guarantees the continuity of signal impedance and reduces signal reflection and refraction..
• Pifi DAC + PCM5122 DAC: Pifi DAC + PCM5122 DAC, I2S interface, analog output signal, compatible with Raspberry Pi B + a + 2B Raspberry Pi 3B (64 bit). Provide infrared receiving interface..
• Get rid of the current sound: The RPI+DAC HiFi kit uses an insulated power supply design to isolate the Raspberry Pi nutrition from the DAC part of the independent power supply, and the beads do not interfere with each other, and get rid of the sound of electric current. With this RPI+DAC HiFi kit, you can easily get m....

4K@60HZ HDMI Audio Extractor, HDMI 2.0b Audio Splitter Converter, HDMI to HDMI + Optical Toslink SPDIF + 3.5mm Stereo Audio with Control Output Analog Volume Knob Compatible for PS5/4/3/Blu-ray player

• ... product is an HDMI extractor and HDMI splitter with control output analog volume knob, you can control HDMI extractor volume. Note: This unit does not support the ARC function..
• 3 AUDIO MODE SETINGS- HDMI audio extractor splitter have Pass, 2.0CH, 5.1CH 3 kinds of audio mode options. 3.5mm audio output supports 2CH PCM LPCM stereo audio.
• Optical SPDIF output supports 2CH PCM, 5.1CH Dobly Digital, Dobly TrueHD, DTS-HD, DTS.(Please set audio format on HDMI Source to PCM/ LPCM format to use If your device can't support these formats)PCM Setting Path: Device homepage -- system setting -- image and sound -- voice setting -- digital audio output -- PCM..
• WIDE COMPATIBILITY- HDMI to Optical Audio Adapter suitable for various HDMI source devices to meet different needs. HDMI input: Blu-ray/ DVD/ HD player, cable/satellite box, Fire TV, Apple TV, PS3/PS4/PS5, Xbox, PC/laptop, HD camera, HD DVR etc. HDMI Output: Full HD TV, Monitor, Projector. Audio format: Speaker, Amplifier, Soundbar, D-o-l-b-y Digital, Dobly TrueHD, PCM 5.1/2.0.(Not suitable for passive speakers，An amplifier is required for use with this speaker).

Insignia Optical/Coaxial Digital-to-Analog Converter – Black

• PROZOR 192KHz Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed).
• Input Audio Connector: 1 x Toslink, 1 x RCA (Coaxial).
• Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack.
• Powered by 5.5mm USB Power Cable (Power Adapter is NOT Included).
• Do Not Use Other Plugs, It Can Only Use 5V 1A Plug.
• Up to 192KHz/24bit: Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz.
• 24bit S/ PDIF Incoming Bit Stream on Left and Right Channels.
• Supports Uncompressed 2 channel LPCM or PCM Digital Audio Signal Output.
• Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM）.
• Can be Used for PS3, PS4, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc.

PAC LP3-4 L.O.C. PRO Series 4-Channel Line Output Converter

• PROZOR 192KHz Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed).
• Input Audio Connector: 1 x Toslink, 1 x RCA (Coaxial).
• Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack.
• Powered by 5.5mm USB Power Cable (Power Adapter is NOT Included).
• Do Not Use Other Plugs, It Can Only Use 5V 1A Plug.
• Up to 192KHz/24bit: Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz.
• 24bit S/ PDIF Incoming Bit Stream on Left and Right Channels.
• Supports Uncompressed 2 channel LPCM or PCM Digital Audio Signal Output.
• Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM）.
• Can be Used for PS3, PS4, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc.

DAC-M1 Bluetooth DAC Amplifier,Audio Converte Video System with ESS9038Q2M XMOS XU208 Chips,BT,Coaxial,Optical Fiber,USB Input,32Bit/768kHz DSD512 Decoder Separator for Home Theater Game Music Black

• It adopts ESS9038Q2M decoding chip, with XMOS XU208 USB chip and professional FX-AUDIO- customized driver.Can support PCM PCM 32Bit/768kHz DSD512,even if your audio file only supports 16Bit-24Bit/44.1-192kHz. Ultra-low distortion of 0.00025% parameters can also bring you a different listening experience..
• Can support PCM PCM 32Bit/768kHz DSD512,even if your audio file only supports 16Bit-24Bit/44.1-192kHz. Ultra-low distortion of 0.00025% parameters can also bring you a different listening experience..
• Convenient audio transmission mode Bluetooth 5.0 CSR8675 chip can support the transmission protocols of APTX, APTX HD and L-DAC, and support 24Bit/96kHz. You can enjoy the beauty of HiFi music even by Bluetooth transmission..
• Multiple Applications-can be used as a Bluetooth receiver, can be used as an amp or USB decoder, can be used as a dac.
• What You Get - 1x Remote control / 1x DAC-M1 / 1x TYPE c USB cable / 1x 12V1A Desktop power supply.

Digital to Analog Audio Converter with Remote, 192KHz/24bit Digital Coaxial Toslink to Analog L/R RCA 3.5mm Audio with Both Toslink Cable and Coaxial Cable

• 【Digital to Analog Audio Converter】-- It converts Coaxial/Toslink/Optical to Analog L/R audio with 3.5mm audio output, ( NOT capable of being reversed).
• It can be connected to the headphone, headphone Amplifier. (Note: Please set the sound output of the signal source to PCM format.).
• 【Supports Mainstream Digital Optical/Coaxial Input】-- Provides electromagnetic-noise-free transmission, Supports sampling rate at 32, 44.1, 48, 96,192khz, and 24-Bit SPDIF incoming bitstream to left and right channels.
• 【Supports 2 Channel LPCM or PCM Digital Audio Signal】-- Some TV may have PCM/LPCM as the default setting. Otherwise, please set it to PCM or LPCM as below: Setting--Sound--Audio Format, such as Samsung TV, LG TV. (Not support Dolby, DTS, or other 5.1 channel surround sound signals).
• 【IR Remote Control】-- With IR Remote control, you can easily adjust volume/choose coaxial or toslink input/mute/power on or off.
• No need to leave the comfortable sofa. (In order to receive signal better, please aim at the infrared IR indicator on the converter when using the remote control), it can increase or decrease 40db based on the original output volume (without headphone connected).
• 【Toslink Cable+Coaxial cable+USB Charger】-- Two cables are included for m....

Optical to RCA, Digital to Analog Audio Converter, Optical to RCA Converter with Volume Control, DAC Converter Supports Sampling Rate Highest 192KHz, 24bit, Digital Audio Converter with Remote, Optica

• Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA audio ( NOT capable of being reversed)Note: Some products have updated the remote control, the remote control does not have AAA batteries and needs to be configured by yourself.
• Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz.
• 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels, Support speakers and headphones play simultaneously. Make sure your TV audio OUTPUT setting is changed from TV speaker to "External Speaker" or "External Speaker(optical).
• Support REMOTE Control: With IR wireless remote control, easily adjust volume/ choose coaxial or toslink input/ Mute/Power ON or OFF by using the IR wireless remote, no need to leave the comfortable couch.
• In order to received signal better PLEASE make sure the remote is FACING the infrared IR indicator on the converter..
• Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output.
• (5.1 channel is incompatible, Some TV may have PCM / LPCM as the default setting. If not, please set the PCM or LPCM setting as below: Setting--sound--audio format.), Not Support Dolby, DTS, or other surround sound signals.
• Provides Electromagnetic-noise-free Transmission, The Digital....

Sony 3PCM00693A/3PCM00694A LED LED Backlight Strip/Bars (12) New KD-70x690E

USB Desktop DAC Decoder - Audio Amplifier DAC for Headphone Amps and Active Speakers, Amplifiers, Thesycon Driver XMOS XU208 ES9018K2M Replaceable OPA2134 for DIY, DSD256 PCM44.1-384kHz/32bit

• ...purity of the sound, exclusively designed for the HiFi Audiophile, gold plated PCB, THD+N is as low as 0.0008%. Auto Power On/Off, it will synchronously power on/off with the PC..
• [Connect to Active Speakers] AD10 decoder provide not only DSD decoding and higher resolution PCM compatibility but also a better sound quality than computer's built-in sound card or a regular DAC. To be a DAC when connect to power amplifier or headphone amp..
• [Replaceable OP for DIY] AD10 has OP amp socket, DIY player could change the OP amp to meet different needs. LED Screen show orange indicator of format (PCM or DSD) and sampling rate of the playing music. Customized Thesycon driver + XMOS XU208 + ES9018K2M + OPA2134..
• [Efficient Decoding Capability] RCA/ Optical/ Coaxial Output, USB decoding Input which supports DSD64-DSD256(Native) and PCM44.1kHz-384kHz/ 16bit-32bit. Aimpire DAC decoder is designed for Hi-Fi audio file especially DSD native..
• [XMOS XU208 and Customized Driver] XMOS XU208 provide very good resolution for USB input, which up to DSD256 and PCM44.1kHz-384kHz/32bit. And the Thesycon cus....

HDMI to DVI Converter, HDMI Audio Extractor with 5V/1A Power Adapter, HDMI to DVI + SPDIF + 3.5mm Audio Output. Digital to Analog Video Audio Converter for Blue Ray DVD PS3 HD Set-top Boxes CRT

• 【HDMI to DVI Adapter with Audio】HDMI Female Input, 24+5 DVI-I Female Output, 2.1CH 3.5mm Audio Output and SPDIF/TOSLINK Output..
• 【HDMI to DVI Audio Converter】Convert High Quality Signals From HDMI as Set-top Boxes, Network Boxes, PS3, PS4, Computers and Blue-Ray DVD Into Normal DVI Signal as TVs, Projectors and Monitors, Optical Signal and 3.5MM for Headphones. Supports Multiple Audio Modes DTS / AC3 / PCM / LPCM PCM / etc..
• 【HD 1080P@60HZ Resolution】Support HDMI 1.3. HDMI Input Resolution: 480P / I60, 576P / I50, 720P50 / P60, 1080i50 / I60, 1080P50, 1080P60. DVI Output Resolution: 480P60 / 480I60, 576P50 / 576I50, 720P50 / P60, 1080I50 / I60, 1080P50, 1080P60..
• 【5.1CH/2.0CH Audio Switcher】With 5.1CH/2.0Ch Switch Button to Select Corresponding Audio. Optical Output Support 5.1 DTS / AC3 / 2.0CH LPCM PCM / ETC. 3.5mm Headphone Output Support for 2.0CH PCM /LPCM..
• 【Wide Compatible】Plug and Play, No Need To Install Drivers, Compatible with Blu-ray DVD, PS3, PS4, XBOX 360, HDTV BOX, CRT, Monitor and More. Note: Not Compatible for PS4 PRO..