Reviews Prime Line R 721drawer Slide Kits

Prime-Line R 7212 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –19-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7212 kit features a self-closing design that commences at the final 2-1/2” from the end of the 19-3/4” long tracks when closing..
  • EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website..
  • 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 20” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top..
  • For all dimensional information please r....
Check Stock

Prime-Line R 7210 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –15-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7210 kit features a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing..
  • EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website..
  • 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 16” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top..
  • For all dimensional information please r....
Check Stock

Prime-Line R 7211 Drawer Slide Kit Replace Drawer Track Hardware Self-Closing Design Fits Most Bottom/ Side-Mounted Drawer Systems 17-3/4 Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE Whether you are installing new drawers or repairing one that wont open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN The smooth-gliding tracks in the Prime-Line R 7211 kit features a self-closing design that commences at the final 2-1/2 from the end of the 17-3/4 long tracks when closing..
  • EASY TO INSTALL Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Lines website..
  • 75 LBS MAX LOAD CAPACITY The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 18 deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP The clearance required between the drawer and the drawer opening for these slides is: 1/2 on left and right sides, 1/4 at the bottom and 5/8 at the top..
  • For all dimensional information please refer to the line art and compare to you....
Check Stock

Prime-Line R 7210 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –15-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7210 kit features a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing..
  • EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website..
  • 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 16” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top..
  • A Phillips head screwdriver is required ....
Check Stock

Toro Genuine OEM Commander SnowBlower Paddle Scraper Kit 100-9872 104-4138 38600

  • Paddles Replaces OEM# for Toro 125-1128, 55-9250, 55-9251, 88-0771, 99-9313.
  • Scraper Bar Replaces OEM# for Toro 108-4884 ,Drive Belt 121-6622 ..
  • 99-9313 Paddles and Scraper Bar Kit fits for Toro 38741, 38742, 38743, 38744, 38751, 38563 , 38563 ..
  • Paddles Kits for Toro Power Clear 721 R-C Snowthrower , Power Clear 721 QZE Snowthrower , Power Clear 721 QZR Snowthrower , Power Clear 721 E....
  • Made of heavy duty Polyurethane opposed to Rubber ..
Check Stock

NICHEFLAG 99-9313 Paddles Replace Compatible with Toro 99-9313 Kit 99-9313 Snow Blower Paddles Toro Part 99-9313 Toro 99 9313 Kit with 55-8760 Scraper Blade 55-9300 Belt

  • 99-9313 Paddles Replaces Compatible with Toro 99-9313 Snow Blower paddles, Toro 99-9313 kit, Toro Part 99-9313 Toro, Toro Paddles 99-9313, Toro Rotor....
  • 133-5585 Scraper Blade Replaces Compatible with Toro 133-5585 Blade-Scraper, Toro 139-3536, Toro 108-4884.
  • 121-6622 Drive Belt Replaces Compatible....
  • Hardware Kit for Paddles: 13 x 3296-56 Lock Nuts, 8 x 84-1971 Oval Screws, 4 x 55-9370 Rotor Blade Spacer, 4 x 321-4 Screw-HH, 1 x 321-8 Screw-HH.
  • Fits for Toro Power Clear 721 R, Power Clear 721 E, Power Clear 721 QZR, Power Clear 721 QZE, Power Clear 721 R-c Commercial, Ccr 6053 R Quick Clear,....
  • This Paddle Set is Compatible with Toro 721e parts, Toro 721e snowBlower parts.
  • Toro 721e Paddles, Toro 721 Paddles, Toro 721r Paddles, Toro 721r....
Check Stock

Toro 104-2753 KIT for Snowblowers 104-2753 X2 Paddles 71-5390 Scraper and 71-5381 Belt

  • Paddles Replaces OEM# for Toro 125-1128, 55-9250, 55-9251, 88-0771, 99-9313. Scraper Bar Replaces OEM# for Toro 108-4884.
  • Fits for Toro PowerClear Snowblower 210R, 221QR , 421QR , 621 R, 621 E, 621 ZR, 621 QZR, 621 QZE, 721 R, 721 E, 721 QZR, 721 QZE..
  • Fits for Toro Power Clear 21" Snowblower 38451, 38452, 38453, 38454, 38458, 38459, 38571, 38575, 38576, 38577, 38578, 38581, 38582, 38583, 38584,....
  • 99-9313 Paddles Size: 6 holes diameter: 10.6mm (± 0.2mm) / 0.42in . Small Hole diameter: 6.5mm (± 0.2mm) / 0.256in . Thickness: 7.6mm (± 0.2mm) /....
  • Package Includes: 2 x 88-0771 Paddles,1 x 108-4884 Scraper Bar, 1 x 298090S Fuel Filter, 1 x 570682A Primer Bulb.
Check Stock

XIMIELEC Screen Replacement for Acer Chromebook Spin 311 R721T N18Q12 R721T-47DZ R721T-482Z R721T-48A0 11.6'' LED LCD Display On-Cell Touch Screen Digitizer Assembly with Bezel (1366x768)

  • Compatible Model : for Acer Chromebook Spin 311 R721T N18Q12 R721T-47DZ R721T-482Z R721T-48A0.
  • Please install it Very Professionally, if Not, Please Do Not Try. (You need to Pull Off the Power Adapter & Battery Cable when install).
  • It will be tested and packed carefully before shipping. Please turn off the power before assembly. And we provide a 3-month warranty for quality problems..
  • Before purchasing, please reconfirm whether the product you choose is the model you need, if you have any doubts, please contact us in time..
Check Stock

Prime-Line Products R 7321 Track Guide and Glides – Replacement Furniture Parts for Dressers, Hutches and Nightstand Drawer Systems (2-Pack), Brown

  • HIGH QUALITY REPLACEMENT – Broken furniture? Don’t toss it – fix it! This Prime-Line R 7321 Drawer Track Guides and Glides pack is the perfect fit to fix your drawer system on a variety of furniture items..
  • EACH KIT INCLUDES – 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides, and 8 Phillips drive, pan head screws for installation of guides..
  • PERFECT FOR FIXES – Whether you’re fixing a dresser drawer system or restoring a vintage hutch, these 223887 drawer track replacement guides and glides are a quick and inexpensive fix..
  • EASY INSTALLATION – With these furniture drawer guides, installation is quick and simple – it will be the easiest part of your replacement or restoration project!.
  • PERFECT FIT – These guides fit the Kenlin Rite Trak 1 system and are made of brown plastic. Please note, a metal track is required with these guides, but is not included..
Check Stock

Samsung DA97-04840A Refrigerator Drawer Slide Rail Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • RF267AZRS/XAA-00,RFG299ABRS/XAA-00,RF267AASH/XAA-00,RF267ABRS/XAA-00,RFG297AAPN/XAA,RFG295AAPN/XAA-00,RFG298HDRS/XAA-00,RFG297HDWP/XAA-02,RFG297HDWP/XAA-03,RFG297HDWP/XAA-04,RFG297HDWP/XAA-05,RFG296HDBP/XAA-02,RF265AABP/XAA-00,RFG297HDWP/XAA-01,RFG29THDRS/XAA-00,RF266AZWP/XAA-00,RFG29THDRS/XAA-01,RF266AZPN/XAA-00,RFG298HDBP/XAA,RFG297AABP/XAA,RF268ABBP/XAA-00,RFG293HARS/XAA-03,RFG293HARS/XAA-01,RFG293HARS/XAA-02,RF265AARS/XAA-00,RFG293HARS/XAA-00.
  • Drawer slide rail DA97-04840A supports the drawer as the drawer slides in and out.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Samsung.
  • This drawer slide rail (part number DA97-04840A) is for refrigerators.
  • Wear work gloves to protect your hands when installing this part.
Check Stock

Prime-Line R 7240 Drawer Side Track Back Brackets , White

  • All components constructed of a thick and durable plastic, for sure support.
  • Comes in a solid white color to match white painted, metal drawer slide hardware.
  • Designed for use with most side mounted drawer track systems and accepts most all ball bearing drawer slide hardware.
  • Features deep socket depths to allow for easy front to rear adjustments.
  • Easy to install with only a few simple tools.
  • For further dimensional and specification information, please see the line drawing.
Check Stock

Prime-Line MP7240 Drawer Side Track Back Brackets, (single pack) , White

  • All components constructed of a thick and durable plastic, for sure support.
  • Comes in a solid white color to match white painted, metal drawer slide hardware.
  • Designed for use with most side mounted drawer track systems and accepts most all ball bearing drawer slide hardware.
  • Features deep socket depths to allow for easy front to rear adjustments.
  • Easy to install with only a few simple tools.
  • For further dimensional and specification information, please see the line drawing.
Check Stock

EVERIE Coffee Pod Holder Drawer Compatible with Keurig K Cup Pods (Holds 18 Pods)

  • Drawer is compatible with K-Cup pods. Drawer is with 3 lines, each line is for 6 pods..
  • Easy to take every pod, the end pod holes in each line is for 2 pods, very easy to put it or take out..
  • Smooth slide in or out. Strong frame does not bend over with coffee maker on top so no conflicts traps the slide..
  • 40 Lbs affordable weight on top while K575 with water fully filled is about 18 LBS. Solid frame supports the coffee maker and pods in perfect position..
  • Pre-shaped slots stop the coffee pods from falling over or getting stuck or being wobbly. Keep all yours pods in place and really organised.
Check Stock