Reviews Prices On Miller Welders

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

  • Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
  • Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
  • 50-series (35-50mm, #2-1/0, P/N 129527/129526).
  • 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Miady 25ft 50AMP Welder Extension Cord, 8 Gauge Heavy Duty Industrial NEMA 6-50 Welding Machine Cord with Lighted End, ETL Approved

  • 【PROFESSIONAL WELDER EXTENSION CORD】: Rated at 40A, 250V, 25 feet, features excellent abrasion, oil and moisture resistance and flexibility fits to extend the welding machine. Does NOT fit standard household outlets..
  • 【HEAVY DUTY】: STW jacket and 8 AWG (American wire gauge) x 3C all-copper wires with 6-50 NEMA plug and connector perfect for heavy-duty performance.
  • 【SAFETY IN MIND】: The clear lighted end receptacles provide a power indicator, which shows power is on and cord is ready to use, for you provide optimum performance and added safety..
  • 【LONG ENOUGH】: The 25 feet heavy duty welder machine cord provides length enough, allows you to move your welder around the shop and close to your welding work piece for added convenience..
  • 【GREAT COMPATIBLE】: Ideal for heavy duty industrial use and compatible with most welders on market, such as: Miller Millermatic welders, Lincoln Power MIG series welders, Hobart Handler, Ironman and Betamig welders, Century welders etc. - We provide 24*7 friendly customer support and also back our products for 18 months. Please feel free to contact us..
Check Stock

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

  • 4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

  • Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
  • Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
  • Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
  • tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
  • Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

SSC Controls C810-1425 TIG Foot Pedal Miller 14-Pin Plug Made in USA 25-ft Cable Replaces RFCS-14 043554 194744 Amperage Control

  • TIG welding foot pedal with steel case and professional-grade quality..
  • 14-pin plug and 25-ft cable for Miller and Hobart TIG welders..
  • Replaces Miller RFCS-14, 043554, RFCS-14 HD, 194744 weld foot control pedals..
  • Press to activate gas contactor and increase amperage.
  • release to turn off and activate afterflow..
  • Made in USA by SSC Controls Company. Certified to CSA and UL standards..
Check Stock

SPARC 20' Inert Gas Welding Hose 5/8\ UNF-18RH Fittings

  • QUALITY ✔ Premium 20FT Rubber Hose - 200psi working pressure, 800psi burst pressure.
  • CONNECT ✔ Crimped 5/"8 UNF-18RH inert gas fittings on each end. Brass material. This hose will thread into most Miller, Lincoln, ESAB, Harbor Freight, and many more welders with a standard inert gas fitting..
  • COMPATIBLE ✔ with argon, CO2, helium and any other welding gases.
  • GREAT FOR ✔ our flowmeters SP00005 and SP00006.
  • WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 1 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail..
Check Stock

SPARC Inert Gas 5/\8-18RH Flare to 1/8\ NPT Welding Hose - 12FT

  • QUALITY ✔ Premium 12FT Rubber Hose - 200psi working pressure, 800psi burst pressure. Great for when your bottle or dewar is far away!.
  • CONNECT ✔ Crimped 5/"8 UNF-18RH inert gas fitting on one end, 1/8" NPT male on the other. Brass material. This hose will thread into most Miller, Lincoln, ESAB, Harbor Freight, and many more welders with a standard inert gas fitting..
  • COMPATIBLE ✔ with argon, CO2, helium and any other welding gases.
  • GREAT FOR ✔ our flowmeters SP00005 and SP00006.
  • WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 1 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail..
Check Stock

Bestarc Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Argon Gas Welding AGR-2

  • Argon / CO2 regulator and flow meter, suitable for most argon tanks, argon hose for Miller, Lincoln, Hobart, HTP, and most other welders.
  • The material of body is quality brass. Sturdy and durable.
  • Easy to use, gas regulator can be directly screwed into argon or argon / CO2 tank, ideal choice for MIG TIG welding, chemical and electronics industry.
  • Accurate to read, pressure gauge reads from 0 - 3500 PSI, and the square flow tube reads from 0-25 CFH.
  • We provide high quality products at fair price, one year warranty, professional after-sales service.
Check Stock

SPARC Argon CO2 Flowmeter + Regulator MIG TIG 0-60CFH CGA580 Inlet 2YR USA WARRANTY

  • INLET ✔ CGA580 Bottle Connection for argon and argon, CO2, and helium blend bottles.
  • OUTPUT ✔ Female 9/16" x 18 nut and male 5/"8 UNF-18RH fitting- 1/4" Hose Barb Adapter Included.
  • WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail..
  • PRESSURE ✔ 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included..
  • IDEAL FOR ✔ Miller, Lincoln, Hobart, HTP, and most other welders!.
Check Stock

SPARC Dual Output Argon Welding Flowmeter 0-60CFH CGA580 Inlet 5/8 Outlet 2YR USA Warranty

  • INLET ✔ CGA580 Bottle Connection for argon and argon blend bottles.
  • OUTLETS ✔ Female 9/16" x 18 nut or 5/"8 UNF-18RH - Hose Barb Adapters that fit both 1/4" to 5/16" hose are included.
  • WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer....
  • PRESSURE ✔ 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included. Large text, PSI only, no confusing metric scales cluttering gauge....
  • IDEAL FOR ✔ Miller, Lincoln, Hobart, HTP, and most other welders!.
Check Stock

Reboot CO2 Gas Regulator Full Copper Flowmeter Mig Welding Gas Regulator Valves Welding Accessory for Mig Tig Welding Machine

  • This CO2 gas mig regulator is designed for professional TIG/MIG welding applications..
  • The output flow is adjustable from 0- to 25 lpm. And is indicated by a ball which moves up and down in the flow tube..
  • The material of body is full copper. Great for Miller, Lincoln, Hobart, HTP, and most other welders!.
  • This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
Check Stock

WeldingCity 150-amp WP-17FV Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Dinse 35-50 Solid 1/2 -pin Cable Adapter with Separate Gas

  • Premium quality 150-amp air-cooled WP-17 complete TIG welding torch package with 12.5-ft and 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
  • 12-pcs torch package includes: 150-amp air-cooled WP-17 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 57Y01R (12.5-ft) or 57Y03R (25-ft), Nylon cable cover with zipper.
  • Dinse 35-50mm solid 1/2"-pin adapter with separate gas hose and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-17 (regular), WP-17F (flexible head), WP-17V (head with gas valve) and WP-17FV (flexible head with gas valve)..
  • Dinse 35-50mm solid 1/2"-pin cable adapter with separate gas hose and 3/8-24R female rear to adapt WP-17 torch cable. Dinse-type 35-50mm solid adapter (compatible with Miller/Lincoln reference # 195378/K960-1) for use with all mainstream welders on markets, as well as ideal replacement for many other aftermarket or equivalent welders. CHECK ALL PICTURES AND YOUR TIG WELDER FOR MATCHING..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock