Reviews Press Fitting

HEFU French Press Replacement Screen Filter-Metal Center Ring- Pack of 2 4 Inch - Reusable Stainless Steel Filter - Easy to Clean and Replace - Residue-Free Brewing Free Bonus and Ebook

  • Perfect Fitting: The perfect size and tightly folded edges of the French press coffee filter ensure perfect fitting in your French press. The mesh....
  • Easy Replacement: You don't need to go through any complicated procedures to fit this replacement filter. Replace the coffee filters for French press....
  • Compatibility: Our French press filter replacements with the 4-inch wide diameter, can fit almost every standard 8-cup French press. The French coffee....
  • Refine Filtration: This French press filter is carefully designed by our skilled professional to let you have a perfectly brewed cup of coffee. Start....
  • Low Maintenance: The superfine mesh design of the coffee filter makes it very convenient to be cleaned. Just rinse the mesh filter under the tap, and....
Check Stock

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
  • 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
  • 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

Professional 13 Piece Watch Press Set - Watch Back Press - Watch Back Case Closer Include 12 Dies with Metal Inserts (Blue)

  • 13 Piece Watch Press Set Watch Back Press Back Case Closer Crystal Glass Fitting Watch Repair Tool.
  • Material Cast Iron watch back case press, durable and strong.
  • Includes 12 dies for 21&23,24&26,28&30,31&32,33&34,36&38,40&42.44&46,48&50.
  • These exclusive straight wall nylon dies will not scratch or mar crystals.
  • Color: Blue Watch Press Back Case Closer.
  • A perfect watch press for snap on watches, allows dies to snap on-and-off quickly.
Check Stock

Kobalt 3/8-in Kink Free 50-ft Rubber Air Hose

  • Press button once to disconnect air supply.
  • Universal design connects to industrial and automotive interchanges.
Check Stock

Microfleur 5 13 cm Regular Microwave Flower Press Kit for Pressing Flowers and Making Pressed Flowers

  • PERFECT SIZE FOR TRAVEL: fits in your suit case, backpack, or glove compartment so you always have it with you to press fresh flowers & leaves for....
  • BETTER COLOUR RETENTION compared to traditional methods of flower pressing..
  • FAST & EASY to press & dry flowers, fitting in any conventional microwave. Press flowers in minutes! (Minutes: broken up in a few or many short bursts....
  • PATENTED DESIGN releases moisture from flowers, leaves, plant material, botanicals, herbs, allowing them to press and dry quickly..
  • REUSABLE: Made in the USA from durable material and is 100% reusable for hundreds of pressings with proper use and care. Liners are washable. No....
Check Stock

PNBO 1 Ton Manual Arbor Press,Heavy Duty Cast Iron Desktop Punch Press Machine for Riveting Punching Holes

  • 【1 TON PRESSURE】: This arbor press can apply up to 1 ton pressure in your operation. Adjust the appropriate pressure to complete the installation,....
  • 【STABLE BASE】: The arbor press base has 4 fixing holes. The movable machined steel anvil provides accurate work support at the four slot....
  • 【CARBON STEEL MATERIAL】:Our arbor press is made of high-quality cast iron material. So its body is very sturdy and durable. It can ensure your....
  • 【SLOTTED TABLE-PLATE】:The manual press has an anvil plate. It is slotted for various applications, if you have other needs, you can move and....
  • 【VARIOUS APPLICATION】:It is mainly used to press the bearing and the workpiece with hard fitting.such as riveting, punching, bending, and other....
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock

PNBO Manual Arbor Press 0.5 Ton,Heavy Duty Desktop Punch Press Machine for Riveting Punching Holes

  • 【CARBON STEEL MATERIAL】:Our arbor press is made of high-quality Cast Iron material. So its body is very sturdy and durable. It can ensure your safe and stable operation..
  • 【0.5 TON PRESSURE】: This arbor press can apply up to 0.5 ton pressure in your operation. Adjust the appropriate pressure to complete the installation, removal or compression of your work pieces. The maximum working height is 3.54in/90mm..
  • 【STABLE BASE】: The arbor press base has 4 fixing holes. The movable machined steel anvil provides accurate work support at the four slot positions. Make your work safe and smooth..
  • 【SLOTTED TABLE-PLATE】:The manual press has an anvil plate. It is slotted for various applications, if you have other needs, you can move and replace it..
  • 【VARIOUS APPLICATION】:It is mainly used to press the bearing and the workpiece with hard fitting.such as riveting, punching, bending, and other pressing applications..
Check Stock

RCBS Summit Single Stage Reloading Press

  • PERFECT FOR SMALLER RIFLE CARTRIDGES: The long handle that comes standard on our exclusive Co-Ax single stage press delivers more leverage than necessary for several small rifle cartridges. At half the length of the standard handle, the Forster Short Handle retrofits on your Forster Co-Ax press, to provide the perfect amount of leverage for small rifle cartridges..
  • EASY TO GRIP: The Forster Short Handle is complete with a comfortable 2" ball fitting on the end that makes it easier to grip..
  • STEEL SHAFT: The steel shaft makes for a durable and stiff handle that can withstand repetitive use..
  • EASY MOUNT HANDLE: It easily mounts in the Co-Ax Press with a single set screw..
  • LENGTH: The Forster short handle measures 4" long, the perfect length for short rifle cartridges and most handgun calibers..
Check Stock

PNBO Arbor Press 1 Ton,Ratchet Leverage Arbor Press with Handwheel,Manual Desktop Punch Press Machine Metal Arbor Press Tool,for Stamping,Bending,Stretching,Forming

  • This arbor press can apply up to 1 ton pressure in your operation. Adjust the appropriate pressure to complete the installation, removal or compression of your work pieces. The maximum working height is 4.33in/110mm..
  • The arbor press base has 4 fixing holes. The movable machined steel anvil provides accurate work support at the four slot positions. Make your work safe and smooth..
  • The manual press has an anvil plate. It is slotted for various applications, if you have other needs, you can move and replace it..
  • Our arbor press is made of high-quality cast iron material. So its body is very sturdy and durable. It can ensure your safe and stable operation..
  • Ratcheted Arbor Press is mainly used to press the bearing and the workpiece with hard fitting.such as riveting, punching, bending, and other pressing applications..
Check Stock

Precision Picatinny Bubble Level,Anti-Cant Level

  • PERFECT FOR SMALLER RIFLE CARTRIDGES: The long handle that comes standard on our exclusive Co-Ax single stage press delivers more leverage than necessary for several small rifle cartridges. At half the length of the standard handle, the Forster Short Handle retrofits on your Forster Co-Ax press, to provide the perfect amount of leverage for small rifle cartridges..
  • EASY TO GRIP: The Forster Short Handle is complete with a comfortable 2" ball fitting on the end that makes it easier to grip..
  • STEEL SHAFT: The steel shaft makes for a durable and stiff handle that can withstand repetitive use..
  • EASY MOUNT HANDLE: It easily mounts in the Co-Ax Press with a single set screw..
  • LENGTH: The Forster short handle measures 4" long, the perfect length for short rifle cartridges and most handgun calibers..
Check Stock

SENDUO Arbor Press 1 Ton,Ratchet Leverage Arbor Press with Handwheel,Manual Desktop Punch Press Machine Metal Arbor Press Tool,for Stamping,Bending,Stretching,Forming

  • 【CARBON STEEL MATERIAL】:Our arbor press is made of high-quality cast iron material. So its body is very sturdy and durable. It can ensure your safe and stable operation..
  • 【1 TON PRESSURE】: This arbor press can apply up to 1 ton pressure in your operation. Adjust the appropriate pressure to complete the installation, removal or compression of your work pieces. The maximum working height is 4.33in/110mm..
  • 【STABLE BASE】: The arbor press base has 4 fixing holes. The movable machined steel anvil provides accurate work support at the four slot positions. Make your work safe and smooth..
  • 【SLOTTED TABLE-PLATE】:The manual press has an anvil plate. It is slotted for various applications, if you have other needs, you can move and replace it..
  • 【VARIOUS APPLICATION】:Ratcheted Arbor Press is mainly used to press the bearing and the workpiece with hard fitting.such as riveting, punching, bending, and other pressing applications..
Check Stock