Reviews Press Brake Die

CJ Online Shop V-Die Block Press Brake Sold Steel 6 Inch 4-Way 2-3/8 Inch x 2-3/8 Inch 7.5 Pounds Perfect Accessory

  • V-Die Block Press Brake Sold Steel 6 Inch 4-Way 2-3/8 Inch x 2-3/8 Inch.
  • This 4-Way V-die Is The Perfect Accessory For Bending Thin Material.
  • Heavy Duty Solid Steel Block. This Die Is Precision Machined And Designed To Last.
  • Block Size: 6 Inch x 2-3/8 Inch x 2-3/8 Inch.
  • Dimension: 6 in L x 2-3/8 in W x 2-3/8 in H *Rough Estimation* Weight: 7.5 Pounds *Rough Estimation*.
Check Stock

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

  • Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
  • Direct Replacement For Your Worn 3/16” Die Set.
  • Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
  • This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.
Check Stock

SWAG HEMMING DIES, FIT THE 12 & 20 TON FINGER BRAKES ONLY

  • The kit consists of 32 individual pieces that when fully assemble forms an 8" long Hemming die..
  • Increase the bending capabilities of your SWAG Finger Press Brake kit!.
  • Hemming Dies for Folding Sheet Metal over on itself, or another part..
Check Stock

Snaps Rivet Grommet Prong Eyelet Popper Fastener Self Cover Fabric Button Hand Press Machine Set

  • [Handpress Machine] Universal Hand Press Machine for grommets, snap buttons, rivets, fabric covered buttons.
  • [Snap Button Dies] 1 set of die for 10 mm 'S' spring press fasteners type VT2 (includes 4 pieces) 1 set of die for 12,5 mm 'S' spring press fasteners type T54 (includes 4 pieces) 1 set of die for 15 mm 'S' spring press fasteners type Alfa (includes 4 pieces) 1 set of 9.5mm Perforated prong snap button fastener button tool/die (includes 2 pieces).
  • [Rivet Dies] 1 set of 7mm Rivet Die/Mold (includes 2 pieces) 1 set of 9mm Rivet Die/Mold (includes 2 pieces).
  • [Grommet Eyelets Dies] 1 set of 5.4mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 7.5mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 9mm Inner Diameter Grommet/Eyelet Die/Mold (includes 2 pieces).
  • [Hole Puncher] 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece brass base for a hole cutter.
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

Testament Of Youth

  • Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
  • Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

DZNTOOLS Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine

  • Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine.
  • 1 piece of Hand Press Machine 1 set of Snap Die 10 mm 1 set of Snap Die 12.5 mm 1 set of Snap Die 15 mm 1 set of Rivet Die 5 mm 1 set of Rivet Die 6 mm 1 set of Rivet Die 7 mm 1 set of Rivet Die 9 mm 1 set of Rivet Die 11 mm 1 set of Eyelet Die 4.5 mm 1 set of Eyelet Die 5.4 mm 1 set of Eyelet Die 6 mm 1 set of Eyelet Die 7.5 mm 1 set of Eyelet Die 9 mm 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece Brass Base for a hole cutter.
  • Suitable for leather, fabrics, jeans, costumes etc..
Check Stock

Forster Products Bench Rest Die Set 338 Lapua Magnum

  • Includes a Full Length Sizing Die and standard Bench Rest Seater Die in a Deluxe Die Box.
  • We recommend a Full Length Sizing Die/Bench Rest Seater Die set for each rifle caliber you own.
  • If using Forster Dies in a Forster Co-Ax press, shellholders are not required.
  • If using Forster Dies in any non-Forster press, use manufacturer-recommended shellholders.
Check Stock

FLKQC 13 Piece Watch Press Set | Watch Back Press Watch Back Case Closer Include 12 Dies with Metal Inserts

  • Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover..
  • Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2）It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3）Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4）Please read the instructions or use tutorial in the product's page carefully before use..
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cl....
Check Stock

NICHE Brake Pad Set for Harley-Davidson Dyna Softail Rocker 42298-08 44082-08 Front Rear Semi-Metallic

  • FITMENT - Replacement Brake pads and Brake shoes fit 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 for Kawasaki Bayou 300 KLF300B.
  • QUALITY - Brake Pads use a combination of high-strength fibers to reinforce the pad's friction, which enhances thermal stability and durability.
  • QUALITY - Brake shoes are made using either high pressure die cast aluminum platforms or steel platforms with bonded brake linings. All shoes are radius ground and edge trimmed and also feature lead in and lead out chamfer at lining ends and original equipment style brake shoe spring.
  • ADVANTAGES - More stopping power, Quieter and Longer time service.
  • NOTICE - Please check the description and compatibility chart to verify the fitment before your purchasing.
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ✔【Sturdy Material】: Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, not easy to deform, durable for long time use. Ergonomically designed reinforced handle, efficient, Comfortable & non-slip. Perfect Father's Day Gift.
  • ✔【Universal Disc Brake Caliper Pistion Tool】: Brake piston caliper is equipped with 2 large push plates and 2 brake caliper hooks. The larger plate is fixed in place by built-in powerful magnets and cylindrical pins for easy and quick installation and removal. The hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair..
  • ✔【Easy to Operate】: Brake Pistion press tool adopts 360° ratchet design, which can be used in any direction. Centrally located ratchet evenly spreads force in a parallel manner when compressing pistons to ensure proper alignment and prevent damage to your brake components. The extended handle allows for easy change from spreading to retracting. Flip the switch in the ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for mos....
Check Stock

HauSun Brake Caliper Press Tool - 360 Degree Car Adjustable Ratchet Piston Spreader Tools Set for Single Twin Quad Piston Disc Brake Repair Replacement

  • 【Main Function】This Brake Caliper Press is professional for automotive brake caliper piston adjustment. Works on single, twin and quad pistons,as well as single and twin piston floating calipers..
  • 【360° Ratchet】Brake Repair Brake Spreading Tools adopts a full 360 degree swing ratchet design so that the spreader may be placed at any position. And your hands will not get fatigued from the constant squeezing..
  • 【Easy to Use】This Brake Caliper Piston Expander is very easy to operate. Swing the long lever handle to expand and retract the two spreading plates, and the positive and negative regulation is realized by flipping the reversing switch on the ratchet..
  • 【Sturdy Material】This Brake Caliper Compressor is constructed of heavy duty carbon steel. The spreading plates with 1/8" thickness steel, high strength, not easy to deform..
  • 【Product Size】This Brake Caliper Press Tool is a must-have tool for doing brake pad replacement, changing the brake, resetting the piston, and doing other brake works .Fully retracted: 1.57”, Fully expanded: 2.72”.
Check Stock