Reviews Precision Spring Die

Hornady Match Grade 2 Die Set, 338 LAPUA MAG (.338) (544399) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • ...vid Reloader - hand crafted and polished for an unmatched finish, the Hornady Match Grade Die 338 LAPUA MAGNUM 2-Die Set (.338) (544399) give you total control over neck tension when resizing. Tight tolerances at the press translate into tighter groups at the range.
  • Find the Match Grade Bushing Dies You Need - these precision dies give the handloader more control over the loading process. They feature self-centering, interchangeable neck sizing bushings, that are held to strict tolerances to provide superior accuracy to eliminate the chance of over-sizing your case necks and overworking the brass (not included with die).
  • Full Length Sizer Die - features precision-polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - Hornady reloading dies a....
Check Stock

General Tools 842 Precision Pencil Compass includes pencil Yellow

  • CARPENTER QUALITY – this pencil compass is a carpenter quality precision tool made of long lasting die cast and a rust resistant metal.
  • 9 INCH JAW CAPACITY – not only is this compass a robust scribing and marking tool, it has a spring tension adjustment for marking up to 9”(229mm)....
  • PIVOT SPRING HANDLE – the swivel spring handle of this compass makes this a great tool for making contours and circles.
  • SCRIBE GUIDE – is used for edge marking.
  • PENCIL INCLUDED – compass can be used with the included pencil or with a slim ballpoint pen.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Snaps Rivet Grommet Prong Eyelet Popper Fastener Self Cover Fabric Button Hand Press Machine Set

  • [Handpress Machine] Universal Hand Press Machine for grommets, snap buttons, rivets, fabric covered buttons.
  • [Snap Button Dies] 1 set of die for 10 mm 'S' spring press fasteners type VT2 (includes 4 pieces) 1 set of die for 12,5 mm 'S' spring press fasteners type T54 (includes 4 pieces) 1 set of die for 15 mm 'S' spring press fasteners type Alfa (includes 4 pieces) 1 set of 9.5mm Perforated prong snap button fastener button tool/die (includes 2 pieces).
  • [Rivet Dies] 1 set of 7mm Rivet Die/Mold (includes 2 pieces) 1 set of 9mm Rivet Die/Mold (includes 2 pieces).
  • [Grommet Eyelets Dies] 1 set of 5.4mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 7.5mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 9mm Inner Diameter Grommet/Eyelet Die/Mold (includes 2 pieces).
  • [Hole Puncher] 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece brass base for a hole cutter.
Check Stock

Spring Steel Round Shortening Shim Assortment (270 Pieces), Unpolished (Mill) Finish, Inch, With Case

  • Assortment includes 270 round shortening shims in a variety of sizes.
  • Precision die cut to fit close tolerances around a shoulder screw shank and fit under the screw head to shorten shoulder length.
  • Made of spring steel for flexibility and a balance of strength and toughness.
  • Comes in a compartmented plastic case for organized storage.
Check Stock

Bostitch Booklet Stapler - One Finger, No Effort, Spring Powered, Long Reach Stapler - Silver (1610)

  • Use one finger to staple up to 25 sheets, jam-free.
  • 12.5" long reach and handles jobs up to 25" wide.
  • Built-in ruler + paper guide for precision stapling when binding booklets, pamphlets, and other specialty projects.
  • Sleek, die-cast metal housing for durability.
Check Stock

Spring Steel 1095 Shim Sheet Assortment Blue Tempered Polished Finish Spring Steel Shim Stock 0.004 0.008 0.015 0.02 0.024 0.03 Thick 6 Width 6 Length 6 Pieces

  • ✿---- If you are a professional tool or die maker, or a machine maintenance engineer, you may often need these precision gaskets, you can prepare some for emergency use..
  • ✿---- Our spring steel shim sheet assortment including 6 popular thickness（0.004", 0.008", 0.015", 0.02", 0.024", 0.03" ）to meet your various need, great value and practical..
  • ✿---- Spring steel shim sheet is made of high carbon blue tempered spring steel which has a excellent processing performance, can cut or weld according your reqirement..
  • ✿---- Spring steel shim widely used in applications which high toughness and accurance are required. Such as machine installation and maintenance, mold setting, etc.
  • ✿---- As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Swanson Tool Co TC130 6-Inch Combo Square with Cast Zinc Body Stainless Steel Ruler and Brass Bolt

  • 6 in stainless steel blade features precision-etched black gradations, includes brass hardware.
  • Multi-tool: square, depth gauge, height gauge, plumb level, scriber, and level.
  • Spring-loaded bolt holds blade in place for firm, accurate settings.
  • Durable die-cast zinc body for durability.
Check Stock

DEWALT Die Grinder, 1-1/2-Inch (DWE4887)

  • 4.2 amp, 25,000 rpm motor of the die grinder provides high power and speed for all 1-1/2-inch grinding applications.
  • AC/DC capacity pf the electric die grinder works off welding machines and generators for increased productivity and versatility.
  • DEWALT die grinder has a convenient paddle switch with lock-on button for easy gripping.
  • Precision 1/4-inch collet securely holds all proper accessories (1/8-inch reducing sleeve as optional accessory).
  • 4.2 Amp, 25,000 rpm motor provides high power and speed for all 1-1/2" grinding applications.
  • AC/DC capacity works off welding machines and generators.
  • Paddle switch with lock-on button for easy gripping.
  • Precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory).
Check Stock

Dutton-Lainson 606-S Pistol Pump Oiler

  • Zinc die cast high pressure pump with ruggedly constructed precision ground piston.
Check Stock

1095 Spring Steel Sheet, Blue Temper, AMS 5122/SAE 1095/AISI 1095/AISI 1095, 0.010\ Thick, 6\ Width, 25\ Length, Pack Of 2

  • Made from a high carbon 1095 hardened and tempered spring steel.
  • Precision Brand's blue tempered shim is "Branded" with everything the user needs to know clearly marked right on the material: material type, material thickness, and lot # for full traceability.
  • Material is preferred by tool and die makers for templates and shim applications where toughness and high fatique strength are required.
  • Measures 6" wide by 25" long by 0.010" thick.
Check Stock