Reviews Precision Made Tap Set

DEWALT 20V MAX Tool Connect 1/2' Mid-Range Impact Wrench with Hog Ring Anvil, Tool Only (DCF896HB)

  • 330 ft-lbs of max fastening torque and 600 ft-lbs of max breakaway torque to complete a wide variety of applications..
  • Compact design of only 6.95" and 3.48 lbs allows access to tight spaces and reduces user fatigue..
  • 3 fully customizable modes allow you to personalize your impact wrench through the Tool Connect™ app including setting: Speed, LED brightness and delay, Precision Wrench™ Control and Precision Tap™ Controls..
  • Precision Wrench™ allows user to set runoff speed in reverse helping to prevent fastener runoff. In forward, users can set pause before impact and auto shut off times to aide in fastening consistency..
  • Precision Tap™ automatically alternates the tool between forward and reverse allowing for easier and faster cutting of threads (vs. manual tapping)..
Check Stock

86PC Tap and Die Set Combination Metric Tap and and Die Set Tungsten Steel Titanium SAE and Metric Tool

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Sae And Metric Included: This  tap and die set comes with 86 pieces in total: 39 pcs taps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock

IRWIN Tap Set, Taper Pipe, 6-Piece (1921ZR)

  • Tap sizes: 1/4"-18 NPT, 3/8"-18 NPT, and 1/2"-14 NPT.
  • Die sizes: 1/4"-18 NPT, 3/8"-18 NPT, and 1/2"-14 NPT.
  • Precision ground heat treated alloy steel.
Check Stock

Century Drill & Tool 93201 1/8-27 NPT Tap and 21/64' Drill Combo Pack

  • Tap and drill Combo pack offers correct drill size for the tap in one convenient package.
  • Tap offers precision cut threads, accurately formed for consistent, exact threading.
  • Tap is heat treated and tempered for file hard threads, and longer, useful life.
  • Tap designed for hand cutting applications.
  • Drill bit made of premium grade high speed steel.
Check Stock

HHIP 3900-0250 Precision Hand Tapper

  • Precision ground work table and spindle to high accuracy..
  • Assures straight perpendicular tapped holes. Rigid structure made of high grade tool steel..
  • 9 tap adapters included: #6, #8, #10, 1/4, 5/16, 3/8, 7/16, 1/2 & 5/8" ..
Check Stock

Alfa Tools CSHTS70532 1/4-20 Carbon Steel Hand Tap Set Taper/Plug/Bottom

  • Precision-made from high carbon tool steel.
  • ideal for hand threading in routine maintenance, repair work and for Rethreading applications.
Check Stock

DEWALT 20V MAX* Impact Wrench Detent Pin Anvil Kit, Mid-Range, Tool Connect, 1/2-Inch (DCF896P2)

  • ...Compact design of only 6.95-inch and 3.48 lbs allows access to tight spaces and reduces user fatigue for DEWALT 1/2 inch impact wrench..
  • 3 fully customizable modes of the battery impact wrench allow you to personalize your impact wrench through the Tool Connect app including setting: Speed, LED brightness and delay, Precision Wrench Control and Precision Tap Controls..
  • Precision Wrench allows user to set runoff speed in reverse helping to prevent fastener runoff. In forward, users can set pause before impact and auto shut off times to aide in fastening consistency..
  • Precision Tap automatically alternates the tool between forward and reverse allowing for easier and faster cutting of threads (vs. manual tapping)..
  • DEWALT built brushless motor for increased efficiency and runtime vs. brushed models..
  • Variable speed trigger helps provide speed control to the user..
  • Through the Tool Connect app receive diagnostics on your impact wrench such as internal coin cell battery life, tool temperature, number of trigger pulls and how long the tool has been running..
  • Track your tool utilizing the last seen feature which provides the street address of where your tool was last in range of a Tool Connect enabled device. Help prevent theft by setting the tool to disable ....
Check Stock

Happybuy 86PC Tap and Die Set Combination Metric Tap and Die Sae Tap and Die Set Tungsten Steel Titanium SAE and Metric Tool (86PC Tap and Die)

  • Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Ta wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 86 pieces in total: 39 pcstaps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock

SharCreatives 60 Piece Metric & SAE Threading Tap & Die Tool Set Coarse and Fine Threads for Threading and Re-threading with Accessories and Storage Case

  • ✔PROFESSIONAL HEAVY DUTY COMPREHENSIVE SET ideal for rethreading fasteners and fastener holes, cutting or renewal internal or external threads . Precision milled SAE and METRIC tap and die set for cutting raw material or repair existing threads, remove screws and more..
  • ✔SUPERIOR QUALITY made of hardened Alloy Steel suitable for lifelong durability, and superior strength. Suitable for cutting in steel, copper, aluminum, cast iron and etc.
  • ✔WIDE RANGE USE - Set includes complete and MOST POPULAR SIZES (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ✔WELL ORGANIZED IN THE CARRYING CASE - Heavy-duty plastic carrying case for easy transportation, safe storage, and quick organization preventing from accessories to fall apart..
  • ✔ PROFESSIONAL AND PERSONAL USE this tap and die kit is ideal for DIY projects at home, auto and machinery workshop and many more..
Check Stock

Fastcom Press-In Threaded Insert Steel, Compatible With Metal, 1/4\-20 Internal Threads External Threads, 0.408\ Length (Pack of 50)

  • 【stainless steel】Thread inserts are made of high-strength diamond-shaped steel wire with high strength and wear resistance..
  • 【full set】This thread repair kit contains installation tool, thread tap, drill, wire thread inserts, you can repair thread with no other tool needed..
  • 【working principle】This thread repair set can be placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision..
  • 【box packed】All accessories are well packed in a box for easy carrying and storage, every tool has a place to place in case of mess..
  • 【wide applications】This thread repair set can be widely used for high voltage switch gear, microwave communication, automotive parts, aerospace precision parts, electronic products, air equipment, radiators, etc..
Check Stock

Kastar 971 SAE and Metric Thread Restorer Kit

  • ...- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.).
Check Stock

Machine Tap 5 PCS HSS Spiral Point Titanium Coated Tap Machine Screw Thread Metric Tap Set M3-M8 M3x 0.5 tap M4 x 0.7 tap M5 x 0.8 tap M6 x 1.0 tap M8 x 1.25 tap

  • ✮ [PREMIUM MATERIAL]- This metric tap set is made of high quality HSS (High Speed Steel) with titanium coating, highly hard, sharp, rustproof, anti-corrosive, durable, ensuring long time use.
  • ✮ [DIMENSION]-5 PCS machine screw thread tap set includes: M3x 0.5 tap, M4 x 0.7 tap, M5 x 0.8 tap, M6 x 1.0 tap, M8 x 1.25 tap.
  • ✮ [FUNCTION]- Nice spiral pointed metric tap set used to create screw threads on wood, plastic, aluminum and more materials and remove chips simultaneously. The machine screw thread tap set have 5 different size spiral pointed taps for processing through-hole threads and deep-hole threads to satisfy your various needs.
  • ✮ [APPLICATION]-Great tap set for auto repair, household projects and machinery where metric threads are specified.
  • ✮ [USAGE]- This machine tap set is suitable for drill presses, tapping machines, CNC and milling machines. The machine tap set can be used with tapping oil to get better quality..
Check Stock