Reviews Precision Locknuts

Moto Bearings Y3 Skate Tool

Glvaner (10 Sets) M10-1.5 x 25mm Thread Length Flat Round Head Socket Head Cap Screws with Hex Locknuts 304 Stainless Steel Furniture Screws Projects

• Package Includes: 10 Pcs M10 Screws and 10 Pcs M10 Hex Locknuts.
• Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
• Included 10 pcs free same size M10 Hex Locknuts to help save your time and money to find nuts.The locknuts are also made of 304 stainless steel and could be found seperately in our shop for your needs..

Performance Tool W89314 1/2-Inch Drive Wheel Bearing Lock Nut Socket Set 7-Piece

• Hex Locknuts Sizes Contains One Each: 2-3/8", 2-1/2" and 55mm.
• Rounded Locknuts Contains One Each: 2-1/2", 2-3/4", 2-9/16" and 2-3/8".

EZ-FLO 40079 Touch Flush Valve for Eljer Toilets White

• WRENCH WIDTH: about 8cm 3.15 inch. Lever length: about 21 cm 8.3inch This Modern metal lever wrench will help your toiletcan add a new stylish touch....
• DURABLE MATERIAL: Metal Plating Wrench + Copper Lever This is highly durable handle arm construction. It features a copper finish handle with Metal....
• EASY INSTALLATION: Side Mount Toilet Lever Handle, suitable for TOTO Kohler Toilet Tankhe sturdy handle is durable construction and easy to install.....
• FUNCTIONAL HARDWARE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread,....
• FUNCTIONAL FOR HOMEUSE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread,....

Mssoomm 20mm CNC Ballscrew Kit SFU2010 RM2010 Anti-Backlash Ball Screw, L 59.06 inch / 1500mm + Nut + BK/BF15 Bearing End Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

• Nut + BK15 integrate with Motor Bracket for stepper motor Nema 23/BF15 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 8mm in default),Precision C7 Grade.
• The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
• The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
• The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
• We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.

Mssoomm 16mm CNC Ballscrew Kit SFU1605 RM1605 Anti-Backlash Ball Screw, L 59.06 in/1500mm + Nut + BK/BF12 Bearing End Block Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

• Nut + BK12 integrate with Motor Bracket for stepper motor Nema 23/BF12 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 6.35mm in default),Precision C7 Grade.
• The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
• The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
• The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
• We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.

Canopy Kit for Chandelier, 5 1/8 Ceiling Lighting Modern Steel Canopy Kit Light Fixture Cover Plate, Hook & Cord Holder for Pendant Lighting Fixtures (Brushed Nickel )

• Canopy size 5-1/8"x 1" includes wire clasp and hook.
• two pendants use options, you can choose to use rope, or chain are designed in 25 lbs..
• 5-1/8"Canopy kit can be used in DIY pendant lights, chandeliers, ceiling lighting and Wall Lights replacements or updates to canopies..
• Design: 5-1/8"Canopy can cover most Ceiling Outlets.
• Metal Cord Holder, the current popular cord light standard.
• Hook can directly hang chain light or other..
• Get a new replacement with any quality problem, 24 hours online service..

Chain Link Fence Gate Wheel for Metal Tube Swing Gate - 6' Hot Galvanized Heavy Duty Gate Wheels for Cattle Fence Gate, Tooltriz

• 【High support weight】An actual high-strength fence gate wheel with the capacity of 550 pounds. The wheel's width and curved rim make it adaptable to all kinds of roads, gravel road, dirt road, and cement road..
• 【Good structure】The tire is real solid rubber with good elasticity and quiet function. Bearings are standard ball bearings, bearing capacity and service life are much higher than other bearings..
• 【Hot-dip galvanized thick frame】The wheel frame adopts new technology, high strength, and hot-dip galvanized.
• longer rust prevention time. In addition, the steel plate is more thikcer than ordinary products..
• 【Standardized chain link fence parts】After a few years, it is easy to buy and find accessories if the bearing or wheel is damaged, save you money..
• 【Stainless steel bolts with locknuts】This gate wheel adopts Stainless steel bolts and stainless steel locknuts. Therefore, there will not happen the gate wheel can't disassemble because of rust..

Canomo Silver Finish Make-A-Lamp Kit 3-Way with 8 Inch Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair…

• Include a 3-Way turn knob socket, 8 inch silver detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
• Silver finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
• Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
• Great for DIY projects and for repair and replacement of broken, tarnished or silver lamp parts..
• Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..

Canomo Antique Brass Finish Make-A-Lamp Kit 3-Way with 8 Inch Lamp Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

• Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
• Great for DIY projects and for repair and replacement of broken, tarnished or lamp parts..
• Antique brass finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
• Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
• Include a 3-Way turn knob socket, 8 inch antique brass detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..

Canomo 2 Sets Lamp Making Kit Lamp Wiring Kit with 8 Inch Harp, 2 Pieces 12\ Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair, Black

• Package Include 2 Packs: 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed blak cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
• Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use.
• Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
• Contains two each: 1/8-IP x 12" threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
• Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts..

Canomo Black Finish Make Lamp Kit Lamp Lighting kit 3-Way with 8 Inch Harp, 2 Pieces 12\ Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

• Package Include a 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed black cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
• Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use.
• Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
• Contains two each: 1/8-IP x 12" threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
• Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts..

SFU2005 300mm Ballscrew kit + Set BK/BF15 Kit + 2005 Ballscrew RM2005 L300-1000mm ball screw with Ball Nuts + Screw Nut Housing for CNCRouter Machine

• ...version and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
• 【End support & Nut Housing】Ball screw vertical end supports BK15 and BF15, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 2005 nut housing matching ball screw, simple assembly and convenient installation..
• 【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
• 【Application Areas】- SFU2005 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devices, etc..