Reviews Precision Hole Saw

VIKITON 6 Inch Hole Saw with Arbor for Metal Wood and Plastic Cutting, 152mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

  • 【Long Service Life】Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance..
  • 【Superior Versatile Performance】High speed steel sharp cutting teeth effectively drills through metal , wood , corn hole boards, PVC board , plastic and drywall , clean and smooth , high precision..
  • 【Easy to Use】Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly..
  • 【High Efficiency】The deep gullets on the sides of hole saw provides fast chip removal, and the geometry funtional slot on the bottom of hole saw provides easy plug removal..
  • 【Package Include】1 pc 6'' hole saw, 1 pc arbor(with 1 drill bit), 1 pc drill bit for replacement, 1 pc hex key..
Check Stock

jxgzyy 17-Piece Hole Saw Kit Durable Carbon Steel Power Drill Hole Cutter with High Precision Cutting Teeth Bi-Metal Hole Saw Kit for Cutting Steel, Drywall, Ceiling Tile, Wood, Plastic

  • 【Packaging includes】：Hole saw kit includes 13pcs saw blades(19mm 20mm 22mm 25mm 29mm 32mm 35mm 38mm 44mm 51mm 57mm 67mm 76mm)，3pcs Extension Rod, 2pcs drill bits for easy replacement, 1pc hex key and 1 elaborate package box..
  • 【High Quality Material】：This hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness, rust proof and sturdy.The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【High precision】 ：The tooth of the saws has been optimized and improved many times, higher cutting efficiency, cleaner and smoother cutting, higher precision.
  • the chip removal groove added on the side of the hole saw can discharge the chip rapidly..
  • 【Solids Storage Box】SOLID STORAGE CASE：The set comes with a customized heavy duty case for portability. Designated slots in the case keep every piece in place. Improve work efficiency..
  • 【Wide Application Scenarios】It can drill holes in stainless steel plate, metal plate, thick steel plate, hole plate, household wood, galvanized pipe, fire pipe, plastic, plasterboard..
Check Stock

HYCHIKA 6 inch 152mm Hole Saw 1 1/2 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall Fiberboard

  • 【HIGH QUALITY MATERIAL】The 6inch hole saw is made of bi-metal with the cutting part made of high hardness carbide steel (69-81HRC), 2mm thick,....
  • 【PRECISE AND CLEAN CUTTIN】Non-binding clean edge design and duplex teeth guarantee a cleaner and smoother cutting with higher precision. The chip....
  • 【HIGH HARDNESS】Comes with a heavy duty 1/2" unique hex shank mandrel, fits 1/2" or 3/8’’ drills. Cutting depth: 40mm. Our hole saw features a....
  • 【WIDE APPLICATIONS】Ideal for hole cutting on soft metal, wood, PVC board, plastic, gypsum board, perfect for home projects like corn hole board....
  • 【WHAT YOU GET】1 x HYCHIKA 6’’ Bi-Metal Hole Saw Blade, 1 x 1/2-inch Hole Saw Mandrel, 2 x Drill Bits, 1 x Hex Key, 1 x User Manual..
Check Stock

7/16” Hex Shank Hole Saw Arbor, Fits 1-1/4” to 6” Hole Saw Quick Change Heavy Duty Alloy-Steel Mandrel with 3 BONUS 1/4” Precision Drill Bits Replacement

  • 7/16 inches shank hole saw adapter made of top alloy-steel material ensure heavy duty capability and super-fast to attach to speed all your jobs improve your work efficiency.
  • This hole saw arbor fit most brand 1-1/4 to 6 inches hole saw such as Dewalt, Bosch, milwaukee, Cle-Line etc. as long as the hole saw can fit 1/2 thread with 2 pins.
  • One order comes with 1 x Mandrel, 1 x Hex Wrench, and 3 BONUS 1/4” precision HSS Pilot Drill for replacement in order to work smoothly every time without worry of rusting or corrosion slowing or sticking the operation.
  • 0.43 inch Hole Saw Arbor with PIN DRIVE Positive Lock and Quick Change function helping prevent the hole saw from locking on the arbor. This is the preferred design is fast and easy to engage and disengage.
  • 24 MONTHS WARRANTRY: 90 days refund or replacement for no reasons. All your product problems in these 2 years warranty will be solved promptly. Just contact us whenever you have troubles or suggestions.
Check Stock

Utoolmart M42 HSS Hole Saw Cutter Drill Bit Black 71mm Cutting Dia Bi-Metal Plumbers 41mm Opening Depth Hole Opener with 10mm Hex Shank for for Galvanized Steel Pipe

  • 【Material】- Bi-metal Hole Saw is made of premium M42 high speed steel, sturdy and durable, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting..
  • 【Special Designe】- With the non-binding clean edge design, ensures smooth and clean cutting of the hole saw blade. Meanwhile, Small vibration ensures the operation is more stable, and the cutting holes can be quickly balanced..
  • 【Advantage】- Meet all of your cutting and drilling needs with the M42 hole saw. Tooth configuration is ideal for gliding through material to provide smooth cuts, Larger, sharper teeth for faster cutting, and ejector spring aids core quick release after cut..
  • 【Multiple uses】- The Sharp teeth is perfect for hole cutting on soft metal, wood, PVC board, plastic and drywall. Cutting clean, smooth and high precision. Not recommend used in hard wood, hard metal and stone. Suitable for 3-5mm soft metal thickness material..
Check Stock

KUNTEC 17 Pieces Hole Saw Kit 3/4 inches-5 inches (19-127mm) Set with Mandrels, Super Sharp Saw Blade, Install Plate and Hex Key for Sawing Holes

  • This hole saw set includes 13 most common sizes of saw blades: 3/4" (19mm), 7/8" (22mm), 1" (25mm),1-1/8" (28mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm), 2-1/8" (54mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm), 2 mandrels with nut, 1 Hex Key, 1 Install Plate.
  • Carbon Steel, Heat Treated. High strength and hardness, design for increased durability and outstanding cutting performance..
  • High precision, smooth cutting edge. Super sharp saw teeth have been designed to cut faster.
  • Hole saw is suitable for softwood, plastic board, plasterboard, thin PVC board. NOT suitable for hard metal, hardwood, density board.
  • Hole saw kit is an ideal choice for DIY projects and household maintenance and repair,great for tasks of cutting multiple hole sizes from small to large in desk surfaces, doors and furniture..
Check Stock

Hole Saw Set, 23Pcs Hole Saw Kit with 13Pcs Saw Blades, General Purpose 3/4

  • [THE MOST COMPLETE HOLE SAW KIT] Our hole saw set includes 12 most common sizes of saw blades:3/4" (19mm), 7/8" (22mm), 1-1/8" (28mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm), 2-1/8" (54mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm), 2 mandrels with nut, 1 Hex Key, 1 Install Plate. These tools are there to satisfy all your needs..
  • [DURABLE AND SAFETY] Carbon Steel, Heat Treated. High strength and hardness, design for increased durability and outstanding cutting performance. Our hole saw features a reinforced shoulder for added strength and longer life..
  • [EFFICIENT AND ACCURATE] High precision, smooth cutting edge. Super sharp saw teeth have been designed to cut faster, no material get stuck makes work faster and better finished..
  • [EASY TO SET UP] All the tools you need for quick and easy saw changing. A hex key and install plate are included for tool installation. Mandrels with 20mm nuts that can be adjusted by hand or using a spanner when greater tightness is required..
  • [PERFECT FOR MULTI-PURPOSE] Suitable for soft wood, plywood, oak, thin PVC board, plastic,drywall but not metal, great for tasks including cutting holes in desk surfaces, doors, furniture and cabinets.Serve for fitting handles and locks for furniture..
Check Stock

Diamond Drill Bit Tile Hole Saw Set, 16 PCS Hole Core Drill Hole Saw Kit with Adjustable Hole Saw Guide Jig Fixture and Ultimate Triangle Drill Bits Set for Tile, Ceramic, Glass, Porcelain, Marble

  • ...e diamond drill bits more durable. Diameter of triangle bit: 6mm, 8mm, 10mm, 12mm..
  • Rustless & Durable: This diamond drill bits are made of high strength Carbon Steel with smooth nickel plating surface. Each diamond hole saw was coated with high quality Diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges In Seconds. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably..
  • Adjustable Fixture - Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4 ", which is large enough to fit in all size hole saws. Movable ball bearings, two modes (fixing 3 or 4 bearings) are your choice, just flip the board..
  • The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling process easier. Small holes-When debris gets stuck in the hole saw. We can use our screwdriver to pull it out. To provide you with the perfect experience..
  • Wide Usage - This diamond-coated hole saw bit can be used to remove rings on glass, marble, tile, ceramic, PVC or other materials. When the diamon....
Check Stock

Ryker Hole Saw Kit with Arbors and Replacement Drill Bits, Heavy Duty Steel Construction for Boring Wood, Aluminum, Metal, or PVC, Plumbing and DIY Carpentry (Bi Metal - Metal Hole Saw Kit)

  • General Purpose Bi-Metal Hole Saw Set This professional-grade hole saw kit for construction, woodworking, plumbing, and DIY carpentry includes versatile tools for drilling or boring holes including 7 hole saws, arbors, and replacement drill bits..
  • Ultra-Sharp Steel Teeth Our metal hole saws are designed with strong, precision cobalt steel to withstand heavy-duty use on metal, wood, PVC pipes, drywall, plywood, sheet metal, aluminum, plastic, pipes, and other non-ferrous materials..
  • Optimized Hole Saw Cutting Sizes Not every job needs the same size hole which means you need a quick solution to get the job done right the first time. We included 25/32, 1, 1 , 1 9/16, 1 , 2 3/8, and 2 11/16 saws in every tool kit..
  • Low RPM to High-Torque Reliability We use long-lasting cobalt steel in our hole saws to ensure smoother drilling and boring on almost any surface. That makes them ideal for plumbers working with a variety of different metals and materials..
  • Compact, Protective Storage Case Every Ryker Hardware bi-metal hole saw set comes with a rugged storage case to help keep your tools neatly organized and protect them from weather and dirt on the jobsite. A smart choice for home or construction use..
Check Stock

VIKITON 1 inch Hole Saw with Arbor for Cutting Metal Wood and Plastic, 25mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

  • Longer Service Life: Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance.
  • Superior Versatile Performance: High speed steel sharp cutting tooth can effectively drills through metal , wood , PVC board , plastic and drywall , flat and smooth , high precision.
  • Easy to Use: Pass the pilot drill bit on the connecting arbor through the center circular hole on the back of the hole saw, and rotate the connecting arbor until it is tightened..
  • High Work Efficiency : The deep gullets on the sides of hole saw provides fast chip removal.
  • Tool Kit Includes: 1" hole saw, 1 pilot drill bit for replacement, 1 arbor(contain 1 drill bit), 1 hex key.
Check Stock

Kyoffiie Diamond Drill Bits, 16Pcs Diamond Hole Saw Set with 10Pcs Tile Hole Saw Set & Adjustable Hole Saw Guide Jig Fixture 6mm-50mm for Glass, Porcelain, Ceramic, Marble, Tile, Granite

  • 【Premium Material】- These hollow drill hole saw set are made of high speed steel and have a nickel-plated coating to resist corrosion. The thickened diamond coating on the top provides excellent cutting strength for high-precision, smooth cuts without hemming for maximum drilling results..
  • 【Multiple Sizes】- 10 Sizes tile drill bits to meet various needs. Including 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, diameter of triangle bit: 6mm, 8mm, 10mm, 12mm. Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit..
  • 【Ergonomic Design】- The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling process easier. When debris gets stuck in the small hole saw. We can use our screwdriver to pull it out. Ceramic drill bit to provide you with the perfect experience..
  • 【Adjustable Fixture】- Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4.
Check Stock

Tungsten Carbide Alloy Hole Saw Cutter Kits for Metal, TcnoMreol 9pcs Hole Saw Bits Sets Hole Cutter Tool for Stainless Steel, Steel Plate, Copper, Aluminum Alloy Cast Iron 12~42 MM(24/51~1-13/20 in)

  • Material: Made of high quality TCT carbide alloy, strong and durable, high hardness, anti-rust. Also built tungsten steel center drill, precise positioning and very durable.
  • Lengthening-stem designed: These metal hole saw kits come with Lengthening-stem, total length can up to about 90mm(3-27/50”), make sure there is much longer working distance, it possible to punch holes in narrow corner..
  • High efficiency: Designed with center drill bits, precise positioning, hole saw made of precision ground, with sharp tough gears, wear-resistant, and chip removal easily and smoother cutting edges..
  • 9 of kits: Diameter, 12mm(24/51”), 15mm(11/20”), 18mm(7/10””), 20mm(19/24”), 22mm(6/7”), 25mm(49/50”), 30mm(1-9/50”), 35mm(1-19/50”), 42mm(1-13/20”) hole saw kits, and 9pcs spring and Allen wrench. You can choose the most suitable size to make a hole..
  • Widely using: These TCT hole saw sets can use on stainless steel plate(less than 3MM(3/25”), Copper, Aluminum Alloy Cast Iron(less than 10mm(13/33”)), etc. And these hole cutter kits can working with bench drill, magnetic drill, electric hand drill, etc..
Check Stock

Hole Saw Set 7Pcs Diamond Drill Bits with Hole Saw Guide Jig Fixture 1-3.15 inch Coated Core Drill Bits Adjustable Hole Saw Centering Locator Suction Holder for Glass,Ceramics,Tile

  • 7 Sizes Diamond hole saw : 26mm,30mm,40mm, 50mm,60mm,70mm,80mm,made of high strength carbon steel makes these diamond drill bits durable..
  • The diamond hole saws coated with high quality diamond,enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken....
  • Adjustable hole saw drill guide jig fixture with suction base.Plates' maximum opening length is 3-1/4", large enough to put in all sizes' hole saws..
  • Removable ball bearings, 2 Modes (3 or 4 bearings fixing ) are optional for you, just flip the plate.Guide hole saw or drill bit to drill clear holes....
  • Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone.
Check Stock