Reviews Precision Electronic Ceramics

Wiha 56833 Electronic Oblique 48° Cutter, 5.5-Inch

  • Precision Electronic Oblique 48° Cutters, Full Flush.
Check Stock

Rubber Tipped Tweezers PVC Silicone Coated Soft Non Marring Flat Tip Lab Industrial Hobby Craft Tweezers Tools Jewelry Coin Stamp Tweezer Tongs (Black,2 Pieces)

  • 3 Different Ceramic Tip Shape: These ceramic tips are pointed and curved for Precision work and firm grips on hot coils or electronic circuits. One of the most needed tools for any RDA/RTA rebuilder or Electrician..
  • Unique Reverse Design: Cross locking, self-closing design can improve work efficiency. These reverse tweezers will give you unexpected effects in some special situation..
  • Quality Material: Precision-made for those precise adjustments to your coil while firing. Non-Conductive & Heat Resistant will prevent your coil from shorting while firing..
  • Long Life Use: Manufactured with high quality metals and ceramics with tight tolerances and thresholds. Ceramic tips are smooth, solid and anti-magnetic, ideal choice for precise electrical operation..
  • Wide Application: Can work at high temperature(3000F) for a long time and wook good at acidity situation, SMD, soldering point, accurate mechanics, drug operation, clean room, vaping etc..
Check Stock

Techniglass The Grinder for Stained Glass Crafts

  • Suitable for grinding glass,ceramics and other hard and brittle material.Grinding variety of geometric shapes: plane, curve, rounded corners, slope, etc.
  • New design switch avoid electronic conduction.Glass, ceramics, such as grinding hard brittle materials..
  • Automatic water available for some sizes (5/8” 1”).
  • Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm..
Check Stock

3pcs Precision Reverse Ceramic Stainless Steel Tweezers Non-Conductive, Anti-Magnetic Pointed & Curved Tips Tweezers Set Cross Lock Soldering Tool

  • 3 Different Ceramic Tip Shape: These ceramic tips are pointed and curved for Precision work and firm grips on hot coils or electronic circuits. One of the most needed tools for any RDA/RTA rebuilder or Electrician..
  • Unique Reverse Design: Cross locking, self-closing design can improve work efficiency. These reverse tweezers will give you unexpected effects in some special situation..
  • Quality Material: Manufactured with high quality metals and ceramics with tight tolerances and thresholds. Ceramic tips are smooth, solid and anti-magnetic, ideal choice for precise electrical operation..
  • They are Non-Conductive, Anti-Static,Heat Resistant, Anti-Magnetic..
Check Stock

PROXXON Rotary Tool MICROMOT 60/EF 28512

  • For drilling, milling, grinding, polishing, brushing, cutting and engraving, for working steel, precious metals, glass, ceramics, plastics, etc..
  • Ideal for electronic hobbyists, model-builders, mechanics, jewellers, opticians, artists, chiropodists, dental technicians, etc..
  • Quick-action chuck and electronic speed control, with feedback effect (high torque at low rpm's).
  • With low safety voltage. Therefore, also suitable for working with coolant (wet grinding and cutting).
  • Scope of delivery: 1x PROXXON Rotary Tool MICROMOT 60/EF including quick-action chuck. Part number: 28512.
Check Stock

4-1/2\ X 1/4\ X 7/8\ FAST Cut ABR

  • Wear resistance,heat resistance,corrosion resistance and easy combination,Small with and practicality..
  • Widely used in precision polishing technology and burring,such as polishing stone, glass, ceramics,gem stones,metals etc..
  • High working efficiency: precision grinding, quick and simple grinding, good grinding effect..
  • Suitable for grinding, polishing, engraving and polishing of various molds, glass, precision equipment and metals..
  • Used for polishing metal, abrasive tools, wood, jade, DIY, etc..
Check Stock

Muye 3Pcs Precision Ceramic Reverse Tweezers Stainless Steel Tweezers Cross Lock Electronics Industrial Heat-resistant Tweezers Straight, Small Curved, Large Curved Tip Silver

  • ◆【Scenes To Be Used】: Suitable for acid occasions,SMD,solder joints, high temperature operation,purification,electronic equipment, precision machinery, electronic cigarette, pharmaceutical operations.
  • ◆【Insulation】: Ceramic tip is absolutely non-magnetic and static, suitable for precision sensitive electronic components of the operation.
  • ◆【Heat Resistant】: Head strong heat resistance, high temperature 1500 degrees,very few cracks can be a long time work.
  • ◆【Head Replaceable】: Coming with Straight, Small Curved, Large Curved tips,The ceramic tips are shipped with the screws slightly less tightened to ensure safe shipping.Ceramic heads can easily replace.
  • ◆【High Precision】: They feature high precision rounded tips for precise fine-tuning and ensure firm grips on any surface.
Check Stock

Differential Amplifiers 200 MHz (1 piece)

  • Power supply EMI filter is a kind of reactance-type low-pass filter, installed at the power supply input of electronic equipment..
  • It can inhibit noise transmitted through grid power cable, and can inhibit high-frequency interference signals generated by the electronic device itself..
  • High quality imported components provide obvious filtering effect..
  • EMI has become a must have device installed in electronic equipment..
  • Widely used for precision measuring instruments, building automation, precision machinery, elevator lifting equipment, automated system, calculator inverter office equipment, servo system inverter equipment, frequency conversion equipment, lighting equip.
Check Stock

xTool Laser Engraving Marking Paper for Laser Cutter & Laser Engraver, 2 PCS, Laser Engraving Tools, to Laser Engrave on Metal, Glass, Ceramics, Crystal, Jade (Black, 15.4' x 10.6')

  • Premium Auxiliary Laser Engraving Supplies: Laser marking paper can assist you in efficiently engraving patterns on metal, ceramics, stone, glass, crystal, and jade.
  • compatible with most laser cutters and engraver machines.
  • Waterproof & Durable: Engraving blanks are insoluble in water, anti-corrosion, non-fading, and anti-scratch.
  • Laser engraved patterns can firmly bond to the surface of the metal, glass, and ceramics, can be machine washed more than a hundred times.
  • Wide Application: Used extensively in the automotive, aerospace, medical and electronic industries for products identification and traceability, and DIY Crafts.
  • Easy to Use & Process: Each sheet is 15.4" x 10.6" ample enough to cut into any size to meet different needs. Laser engraver marking paper made of premium material can efficiently absorb the laser energy, making your laser engraving process simple and easy.
  • Professional Service: Use our laser engraving papers to engrave exquisit on metal, glass, and ceramics.
  • if you need any assistance, please feel free to contact us, we take full responsibility for the quality of our laser engraving supplies and will solve your problem within 24 hours.
Check Stock

Gryphon Studio Stained Glass Grinder

  • ...7cm, Grinding wheel inner diameter: 0.79cm.
  • ►Multifunction：Suitable for grinding glass,ceramics and other hard and brittle material.Mini size and easy to carry.Stable and reliable performance.Automatic water available for some sizes(5/8” 1”).New design switch avoid electronic conduction.Glass, ceramics, such as grinding hard brittle materials.Grinding variety of geometric shapes: plane, curve, rounded corners, slope, etc..
  • ►Package included: 1 x glass grinder 1 x 5/8” diamond grinder bit 1 x fuse 1 x wrench.
Check Stock

GS Supplies G-S Hypo Cement Transparent

  • It is a combination of a fine precision tool and a clear drying, medium-strength cement that will not damage surfaces..
  • The cement is ideal for jewelry, beads, plastic, glass, metal, ceramics, painted or sealed woods and other non-porous surfaces. This is a no-waste product that is ideal for many applications..
  • Full use of the precision applicator tip is maintained by inserting the cap wire into the tube when not in use, and by cleaning excess drops from the outside of the applicator with rubbing alcohol or nail polish remover..
  • This is not an "instant glue." It becomes tacky in 10 - 15 seconds, allows parts to be adjusted, and dries in 10 to 15 minutes. The cement will not bond fingers, and has a slight odor that dissipates quickly..
  • Great for model making, miniatures, fine screw locking, sealing knots, precision waterproof sealing, precision repairs, optical and technical applications, crafts and hobbies..
Check Stock

BarePaint - Conductive Paint (50ml)

  • Creates durable, reliable, conductive connections.
  • Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic substrates as well as ABS, PLA, and other 3D printing plastics.
Check Stock

MG Chemicals 841AR-P Nickel Conductive Pen, 7.5g

  • Creates durable, reliable, highly conductive connections.
  • Adheres to plastics, epoxy, copper, aluminum, ceramics, wood, and most electronic substrates as well as ABS, PLA, and other 3D printing plastics.
Check Stock