Reviews Precision Angle Tool

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
  • PRECISION：The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....
Check Stock

General Tools T-Bevel Gauge & Protractor #828 - Digital Angle Finder with Full LCD Display & 8\ Stainless Steel Blade

  • PREVENT WASTE: This digital 5” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements..
  • CORNER ANGLE FINDER: Digital angle gauge includes an LCD reader, makings measurements easy to read, while the innovative center check notch enables exact ruler placement markings. Use the electric meter for custom cuts and crown molding..
  • LEVEL RULER: This tool is ideal for finding angles in tight spots, and with the lock feature, the user can improve accuracy and save time when finding the measurement. It's perfect for doing work on framing, custom furniture building, and flooring..
  • PROTRACTOR WITH SWING ARM: Our stainless steel digital angle finder with measuring ruler has a built-in reverse angle function for usability and convenience. It's an essential tool and a great gift idea for a fellow carpenter, student, or machinist..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

COMP Cams 774-16 7 Degree Steel Retainer Set of 16 for GM GEN III w/ 26915/26918 Beehive Springs

  • Maximum Strength - Manufactured from tool steel, COMP Cams' tool steel retainers offer the best strength characteristics possible..
  • Superior Quality - Instead of using cheap steel, COMP Cams' tool steel retainers are made from high-grade tool steel, ensuring high performance and resistance to deformation and cracking..
  • Precision Machined - Manufactured in house using high tech machines, COMP's tool steel retainers are precision machined to ensure optimum load distribution, greater strength and durability..
  • Expansive Fitment Options - Available in 7 and 10 degree lock angles along with 5.5mm, 6mm, 7mm, 8mm, 11/32" and 3/8" valve stem diameters, COMP Cams has a steel retainer for your engine..
  • 7 degree lock angle and is designed to fit our 26975, 26926 and 26526 springs.
Check Stock

Work Sharp Precision Adjust Knife Sharpener

  • Two Carbide sharpeners - one dedicated knife sharpener and one dedicated tool sharpener.
  • The Work Sharp Precision Adjust Knife Sharpener is an angle guided, 3-sided abrasive jig-and-clamp style sharpener that makes manual sharpening faster, easier and more precise than ever..
  • ADJUSTABLE, REPEATABLE - Sharpening angle can be easily adjusted from 15°- 30°, in 1° increments..
  • TRI-BRASIVE ROD - Quickly index between coarse and fine diamond and fine ceramic stone..
  • V BLOCK CLAMP - Removable clamp secures knife safely and consistently..
  • 3-YEAR WARRANTY - protects every Work Sharp tool against defects due to workmanship or design.
Check Stock

Goliathan

  • POWER AND FLEXIBILITY: The 79cc Viper Engine spins a 9” spring steel blade at 3400 RPMs providing the power and speed you need to accomplish lawn,....
  • MUTI-ANGLE CUTTING: Our multi-position pivoting head offers 5 different cutting angles from 70-110 degrees allowing the user to select the angle that....
  • PRECISION LINES: Clean professional lines can be easily achieved regardless of grass type when you combine the balance of a 4-wheeled design with....
  • FLEXIBLE DEPTH CONTROL: Take complete control over your depth of cut with our flexible control mechanism. From the operating position, engage the....
  • DEBRIS GUARD AND TOOL HOLDER: A durable chain skirting protects the operator from flying debris while the attached tool holder provides a convenient....
Check Stock

Mifuse 53101 Multi Angle Miter Shear Cutter with 45 to 135 Degree Adjustable Angle Scissors for Accurate Angle Cutting of Plastic, Decorative Moldings,PVC,Tile Edges,Trim with 2PCS Spare Blades

  • 【High Quality】Mifuse multi angle miter shear cutter hand shear allows to accurately cut angles in seconds up to 1 3/8" wide and 1/2" thick.The rust-proof precision stainless steel blades provide a cleaner cut and accurate cuts for wood, plastic and rubber materials. The quater round cutting tool makes work much easier and time saver..
  • 【Wide Application】The multi angle miter shear is an indispensable hand tool for leather industry,floor layer,carpenters,etc.Ideal for cutting popsickle sticks, craft sticks,plastic,decrative moulds,tile edges or trim,chamfer,round moulds,trunking,PVC strips, styrene,balsa wood,wooden moulds,rubber materials,three-quater round slats, seal strips,threshold profiles,aluminium rails, carpet, facing strips and a wide variety of material types..
  • 【Ergonomics Design】The heavy duty miter trim cutter hand tool adopts power-level mechanism and the ergonomincally curved inward designed steel handles to greatly save your strength when cutting. No hands are fatigue for long term repetitive use with comfortable no slip vinyl coated grip..
  • 【Easy to Use】The miter shear cutters adopt safety built-in locking mechanisim which keeps the precison ground blade protected and closed when not in use. To easily adjust angle, just sli....
Check Stock

farway 3-in-1 Digital Angle Finder - Magnetic Angle Gauge, Electronic Level, and Mini Laser Level with LCD and Backlight - Ideal for Table Saw Miter Protractor and Woodworking Measurements

  • 【Versatile Laser Level】This multi-purpose laser level can be used for measuring angles, checking relative angles, and as a laser level with 2-beam technology. Emitting horizontal laser lines on both sides, it helps you mark with precision. it uses a class II laser limited to 1 mW continuous wave, which is safe for daily use.Making it perfect for home renovations, picture hanging, and DIY projects..
  • 【Highly Accurate】With a 360° (4*90°) measuring range and an accuracy of ±0.1° at 0° and 90°, and ±0.2° at other angles, this digital angle finder provides precise measurements. One-button switching angle and slope, and a resolution of 0.01 degrees make it perfect for design purposes. The true accuracy of the digital angle meter is plus or minus 0.2°..
  • 【Backlit LCD Display】 Equipped with a 1.44-inch LCD display with backlight and a responsive electronic tilt sensor, this digital angle cube provides accurate, immediate, and clear measurements. The display automatically inverts when the tool is upside down, and it turns off after 5 minutes of no operation to save battery..
  • 【Powerful Magnetic Base】 With a str....
Check Stock

Fowler 52-475-050-0, All-Angle V-Block and Clamp with 1.3125\ Capacity

  • Angle Clamp: The sides of this clamp set are parallel while the V is central and ground with a central hole provided for drilling or removing pins.
  • Machinist Tool: V-block set has four 3/8"-16 tapped holes, two in the bottom and one on each side for angle non-clamping.
  • Durable Construction: Made of hardened and precision ground tool steel, this angle V-block is perfect for grinding, milling, or drilling.
  • Dimensions: This V-clamp is 3-5/8" long, 1-7/8" wide, and 1-7/8" high (including clamp) with a holding capacity of 1-5/16".
  • High Accuracy: Sides are parallel and V is central and ground to .0003".
Check Stock

Bosch GWS18V-45 18V 4-1/2 In. Angle Grinder (Bare Tool)

  • LONGEVITY: The Bosch GWS18V-45 18V Angle Grinder delivers all-day grinding and cutting power. It’s designed for a longer tool life with Bosch's Electronic Cell Protection and Electronic Motor Protection..
  • POWER: The grinder includes a powerful four-brush motor design with 0-10,000 no-load rpm to handle the toughest cutting and grinding jobs..
  • CONTROL: The tool features a two-position Vibration Control side handle, for comfortable control, less user fatigue and smoother grinding..
  • SECURE: For user protection, this cordless grinder was engineered with a tool-less quick-change, burst-resistant wheel guard and restart protection to avoid accidental startup..
  • PRECISION: The Bosch GWS18V-45 18V Angle Grinder provides outstanding cutting ability and is optimized for metal applications..
Check Stock

Libman Dust Pan W/Whisk Broom (Pack of 2)

  • LARGE PRECISION ANGLE BROOM: Now available on Amazon, America’s favorite broom, shipping in a more eco-friendly manner..
  • PERMANENT, TWO-PIECE ATTACHMENT: The 2 broom pieces arrive at your doorstep with plastic attachments that, when attached, give the broom a sturdy, permanent hold..
  • SAVES SHIPPING WASTE: Shipping in a smaller box, this broom saves on the waste caused from shipping in bigger, bulkier boxes..
  • QUALITY BROOM: The strong fibers and durable handle make the Libman Large Precision Angle Broom the ideal tool for sweeping indoor or outdoor on all kinds of surfaces..
  • FAMILY MADE IN THE USA: The handle is made from powder-coated steel and the fibers are made from 95% Recycled PET Polymer..
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock

House, Home and More Set of 15 Skid-Resistant Carpet Stair Treads - Burgundy Red - 9 Inches X 36 Inches

  • ...ers, 2 × 8-inch sliders, 2 × wooden strip fixing blocks, 9 × knobs, 5 × long screws, 9 × short screws, 1 × washer, 1 × 6-angle screw wrench, 1 × toolbox.) which can be used in combination to form one piece of tread template according to the actual stair length and at any angle. This is an essential tool for precision cutting and professional measurements..
  • RELIABLE AND DURABLE: The stair gauge is made of an impact and chemical resistant aluminum-alloy material with thickness up to 5 mm, making it resistant to damage and bends. The CNC anodized surface is wear-resistant and rust-proof, and the electroplating markings are more precise and clearer. With superior quality, reliability and durability, this stair measuring tool will help you lay out stair treads, risers and shelves. Easily adjust the angle and length to meet any work requirements..
  • EASY TO USE: Use knobs to properly lock tread templates and sliding robs in place. Turn the knobs to loosen or tighten. Loosen the knob and slide the rod to adjust the length. Turn the stair tread jig to adjust the angle, tighten the knob to fix the length and angle, and move it to the stair tread wood or risers to be cut as needed. Portable, easy to operate and the measurements are extraordinarily accurate....
Check Stock

Mikego 90 Degree Clamp, Corner Clamp, Right Angle for Woodworking, 2 Pack 5.5"x 5.5" Aluminum Alloy Woodworking Corner Clamps, for Picture Frame, Cabinet, Drawers with 4 Clamps & Gaskets and Gloves

  • 【Woodworking Precision 90 Degree Angle Clamp】Our right angle clamp square kit is made of high-quality aluminum alloy to ensure 90 degree precision. Anodized red surface, anti-rust and corrosion-resistant, CNC processing makes it more durable..
  • 【Easy to Operate】The square jig L edge is slightly chamfered, the surface is smooth and soft, it will not scratch your hands and wooden products. Just place the positioning squares on the corners of the woodwork and secure with a set of clips to make a perfect 90 degree angle, it's easy to use and holds the pieces together..
  • 【Woodworking Square Positioning Tool】Designed to clip onto most types of boxes to help level them during gluing or splicing. Can be used in conjunction with jigs to inspect and position plank seams and glue or weld at right angles. Right angle jigs are a great tool that can make your woodworking projects easier..
  • 【WIDE APPLICATION】This 5.5"x 5.5"/140mmx140mm 90 right angle clip is suitable for assembly and DIY of photo frames, drawers, cabinets, photo frames, furniture cabinets, birdhouses, mailboxes, etc. Great for organizing shelvi....
Check Stock