Reviews Pre galvanized Pipe

Oatey 33402 Mechanical Test Plug, 3 in, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

  • End of Pipe Gripper plugs are made with ABS glass-reinforced plates for added strength.
  • Extra large zinc wing nut for ease of tightening, no wrench required, and will not rust.
  • Natural rubber O-ring for excellent expansion and memory.
  • Plug is rated for 17 PSI or 40-ft of head pressure.
  • End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
  • Galvanized carriage bolt to prevent corrosion.
  • Galvanized mechanical plugs have a wide usage range making them effective on most piping material.
  • Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.
  • Plastic mechanical plugs are premium plugs designed to hold higher pressures.
Check Stock

Rohn 9H50 34' Telescopic TV Wireless Antenna Push Up Mast

  • Bottom: 2-1/4"OD Top: 1-1/4" OD / Shipping Length: 99" / 410" (34') Actual Extended Pipe Length - Assembled Height will be around 30'.
  • All sections are 18 gauge except for top which is 16 gauge.
  • Pre-galvanized for corrosion protection. Comes assembled with hardware. Top rings are adjustable based on antenna mounting.
  • NOTE: GUYS, GUY HARDWARE, ANCHORS, AND BASE MOUNT ARE NOT INCLUDED.
Check Stock

48 Galvanized Flexible Exhaust Tubing 5 Diameter Flex Pipe with 2 Band Clamps

  • One pre-cut 48" section of galvanized flexible exhaust tubing with 2 5" exhaust band clamps This exhaust pipe is 5" in diameter and can be used to....
  • The flexible nature of this type of exhaust tube allows for easily installation.
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system.
  • It does this by absorbing vibration and thermal expansion.
Check Stock

18 Galvanized Flexible Exhaust Tubing 5 Diameter Flex Pipe with 2 Band Clamps

  • One pre-cut 18" section of galvanized flexible exhaust tubing with 2 5" exhaust band clamps This exhaust pipe is 5" in diameter and can be used to....
  • The flexible nature of this type of exhaust tube allows for easily installation.
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system.
  • It does this by absorbing vibration and thermal expansion.
Check Stock

24 Galvanized Flexible Exhaust Tubing 5 Diameter Flex Pipe with 2 Band Clamps

  • One pre-cut 24" section of galvanized flexible exhaust tubing with 2 5" exhaust band clamps This exhaust pipe is 5" in diameter and can be used to....
  • The flexible nature of this type of exhaust tube allows for easily installation.
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system.
  • It does this by absorbing vibration and thermal expansion.
Check Stock

36 Galvanized Flexible Exhaust Tubing 5 Diameter Flex Pipe with 2 Band Clamps

  • One pre-cut 36" section of galvanized flexible exhaust tubing with 2 5" exhaust band clamps This exhaust pipe is 5" in diameter and can be used to....
  • The flexible nature of this type of exhaust tube allows for easily installation.
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system.
  • It does this by absorbing vibration and thermal expansion.
Check Stock

Generic Metal Storm Collar (16 Inch)

  • QUALITY: This storm collar is designed to cover metal flashings to divert water from running down the sides of the pipe. It is constructed using heavy 26 gauge galvanized steel.: This storm collar is designed to cover metal flashings to divert water from running down the sides of the pipe. It is constructed using heavy 26 gauge galvanized steel..
  • EASY INSTALLATION: This metal storm collar contains an adjustable tab. Simply bend tab over for a quick and secure fit..
  • MULTIPLE SIZES: This item is available in sizes ranging from 3 Inches to 18 Inches in inner diameter.
Check Stock

Midwest Hearth Poly Chimney Cleaning Brush (8-Inch Round)

  • POLYPROPYLENE BRUSH - Stiff poly bristles clean coal and soot from metal stove pipes, flue, and chimneys.
  • GALVANIZED STEEL STEM - Heavy duty double-spiral stem for long-lasting durability.
  • 1/4 INCH NPT FITTINGS - Features 1/4" male pipe threads for use with our fiberglass rod kits (sold separately).
  • PROFESSIONAL QUALITY - Superior components provide excellent performance.
  • MADE IN USA - Quality manufactured in the Midwest!Description Chimneys should be cleaned at least once a year, and more often if you use your fireplace frequently. Midwest Hearth Poly Chimney Brushes are designed to be used with metal chimney flue to help prevent scratching and marring of the steel pipe. Measure the inner diameter of your flue and order the same size brush: 6" Round or 8" Round. Our chimney brushes are professional quality and feature stiff polypropylene bristles and a heavy duty galvanized steel stem. The brush will have 1/4-Inch male pipe threads at the end that may be attached to extension rods. Midwest Hearth offers an 18-Foot fiberglass rod extension kit that is compatible with these brushes (sold separately)..
Check Stock

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

  • RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
  • Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
  • Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
  • Ideal for application with a wide variety of fluids and gases including potable water applications.
  • Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check Stock

9-12MM Cable Pulling Socks Grips Wire Mesh Puller Socks Grip Mesh Puller Cable Puller Socks

  • 9-12MM: In color Red, force 700lbs(317kgs), weight 20g, length 310mm..
  • MATERIAL: Steel galvanized single strand preparation, anti rust, long used and durable..
  • DESIGN: Eye mesh design, single wave galvanized mesh cable socks, keep your cable from scratching, anti slip, easily grip the cable through the pipe line, the wall or the telecom..
  • CABLE SOCKS: Great tools for electrician, it is soft, and you can bend it. (But be careful, please do not bent it right angle.).
  • APPLICATION: Different size suits for cable with different diameter, by using in pipe cable laying and cable pulling..
Check Stock

EZ NP-72-200 Non-Penetrating Roof Mount with 2\ x 72\ Mast w/Roof Mat

  • This DBS pipe is specifically designed to support your DBS dish for ground level installations.
  • This pipe is galvanized to resist rusting and oxidation.
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock