Reviews Ppr al ppr

04520 for PPRK5 Plastic Pipe Fitting Reamer 5 Piece Kit fit into standard 1/2\ drills PVC pipe reamer tool Contains PPR125, PPR150, PPR200, PPR300 and PPR400

  • 【Scope of application】：PPR reamer is applicable to exhaust pipe, drain pipe and water pipe, and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR125, PPR150, PPR200, PPR300, PPR400 5 Piece, in ahard plastic case.Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is our top priority, We strive to provide customers with quality services.If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days. P....
Check Stock

Tweezerman Slant Tweezer - Pineapple Punch Model No 1252-PPR

  • Item Condition: 100% authentic, new and unused. Tweezerman Slant Tweezer - Pineapple Punch Model No. 1252-PPR..
  • Tweezerman Slant Tweezer - Pineapple Punch Model No. 1252-PPR: Buy Tweezerman Tweezers - Grab hair on the go. Ideal size for makeup bag and travel....
Check Stock

Poulan 580940901 Chainsaw Gas Cap

  • Replaces old part numbers 577858501, 530047192 and 530047164.
  • Fits PP3816A, PP4218A, PPR4218A, PP3816A, PP4218A and PPR4218A.
Check Stock

FUATY 3/4” NPT Plug Male Thread PPR Pipe Plugs and Caps Garden Irrigation Tubing Stopper Drain Plug Compatible with RV Irrigation Water Supply Lines

  • TYPE: 3/4 Inch NPT Male Thread Pipe End Connector Plugs.
  • MATERIAL: Made of quality PPR, corrosion resistance, high strength, and less weight then metal ones.
  • FUNCTION: Plug for closing the end of a pipe or fitting, helps keep dirt out on the line.
  • And it is also a perfect product to winterize outdoor pipe....
  • APPLICATION: Great for agriculture, lawn, garden, patio, greenhouse, swimming pool, misting fog cooling, irrigation, watering, humidification, balcony....
  • PACKAGE INCLUDE: 5Pcs Garden Irrigation Male Threaded PPR End Cap.
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Rotary #10157-6\ x 1\ x .669\ Bore Composite Flat Idler Pulley

  • ... PBA19542LT PB1842LT PB185H42LT CO17542LT PB18H42LT.
  • This 532173437 Idler Pulley Fits for Poulan Decks: HD17542 PBA19542L PBA19542LTX PD17542LT PO14542B PO14542C PO14542D PO14542E PO14542F PO14542LT PO17542LTX PO17542STD PO19542LT PR17542STA PR17542STB PR17542STC PD185H42ST PRK17H42STB PR1742STA DB24H42YT PB18542LT PPR20H42STC PD1842ST PR1842STA HD1842 PPR1742STC PO165H42C PB185H42LT CN1842ST PK1942LT PR16H42STA PR185H42STA.
  • WeedEater WE165T42A WE14542L WE16542D WE16542E WET2242STB S165H42A.
  • Outer diameter : 3-3/4" , Flat outer diameter : 2-7/8" , Flat width : 1.
Check Stock

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

Libraton PVC Pipe Cutter, Up to 1-5/8\

  • Premium Set: PVC cutter*1 & replacement blade*3.
  • Wide Application: The PVC cutter is suitable for most plastic pipes, e.g. PVC pipe, PEX pipe, PPR pipe.
  • Working Efficiency: This plastic cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes.
  • Quick Change: You can quick change the blade replacement easily within 10 seconds without any other tools.
Check Stock

Body-Solid Powerline PLA200X LAT Attachment for use with PPR200X Power Rack

  • Lat attachment for use with the PPR200X Power Rack from Powerline.
  • One-inch diameter weight posts accommodate standard or Olympic weight plates.
  • Nylon coated, aircraft quality 2200-pound test cables.
Check Stock

Replacement Blade for Capri Tools 1-5/8 in. Ratcheting Pipe Cutter (CP11290-BD)

  • Replacement blade for Capri Tools 1-5/8 in. Ratcheting Pipe Cutter.
  • V-shaped cutting blade is specially design to provide a clean cut.
  • Ultra-sharp high carbon steel blade is made for precise and effortless cuts.
  • Cuts PVC, CPVC, PP, PE, PER, PEX, ABS, PEHD, PPR, and PB piping up to 1-5/8 in. in outer diameter.
Check Stock