Reviews Ppr Plastic Pipe

04529 for PPRK6 Plastic Pipe Fitting Reamer 6 Piece Kit fit into standard 1/2" drills PVC pipe reamer tool Contains PPR75, PPR100, PPR150, PPR200, PPR300 and PPR400

  • 【Scope of application】：PPR reamer is applicable to exhaust pipe, drain pipe and water pipe, and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400, 6 Piece,Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is ou....
Check Stock

Libraton PVC Pipe Cutter, Up to 1-5/8\

  • Premium Set: PVC cutter*1 & replacement blade*3.
  • Wide Application: The PVC cutter is suitable for most plastic pipes, e.g. PVC pipe, PEX pipe, PPR pipe.
  • Working Efficiency: This plastic cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes.
  • Quick Change: You can quick change the blade replacement easily within 10 seconds without any other tools.
Check Stock

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

PSW TRADE SUPPLIERS LTD Plastic Pipe Cutter for 1-5/8-inch Plastic Pipe, PVC, Rubber Hose

  • Plastic pipes and tubes pipe-cutting tool for pipes 1-5/8 inches in diameter.
  • Pipe cutter with the rubberised handles for non-slip, secure handling and a safety lock lever to protect it from unauthorised use by children.
  • Automatic, controlled opening of blade at the release of lever lock. The spring-loaded ratchet wheel remains in place, preventing the cutters from closing.
  • The thick and sharp blade is made of high-quality stainless steel, with high hardness and high shear force and spring loaded ratcheting wheel.
  • Suitable for all types of plastic pipes and tubes including PVC, PPR, PEX pipe, PE and rubber hose.
Check Stock

FUATY 3/4” NPT Plug Male Thread PPR Pipe Plugs and Caps Garden Irrigation Tubing Stopper Drain Plug Compatible with RV Irrigation Water Supply Lines

  • TYPE: 3/4 Inch NPT Male Thread Pipe End Connector Plugs.
  • MATERIAL: Made of quality PPR, corrosion resistance, high strength, and less weight then metal ones.
  • FUNCTION: Plug for closing the end of a pipe or fitting, helps keep dirt out on the line.
  • And it is also a perfect product to winterize outdoor pipe....
  • APPLICATION: Great for agriculture, lawn, garden, patio, greenhouse, swimming pool, misting fog cooling, irrigation, watering, humidification, balcony....
  • PACKAGE INCLUDE: 5Pcs Garden Irrigation Male Threaded PPR End Cap.
Check Stock

PVC Pipe Cutter, Cuts up to 2-1/2\

  • 【Wide cutting range】： Pvc pipe cutter tool with the ratchet drive The tube cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PPR, PEX, PE, Rubber hose, etc.), The maximum opening is 63mm, After many tests, the cutting capacity up to 2-1/2-inch (63mm) outside diameter--Can not make a square cut..
  • 【Wide range of applications】：The JHWLKJ Pvc pipe cutter Widely used in life, This is quite convenient for your work and life. I think it is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mechanics..
  • 【Durability】：Made with SK5 Teflon Blade, good toughness, strength. Durable aluminum alloy handles are made to last for long time use.The triangle design at the edge of the knife allows better access to the pipe.Straight Cuts - Blade does not bend or break.You can use it to cut the pipe more smoothly..
  • 【Comfortable operation】：The professional tube cutter adopts ratchet drive technology to greatly save your strength to smoothly complete the cutting operation with one hand, which makes cutting more labor-saving and improves work efficiency. It also ensures automatic locking during the cutting process to protect the user from the rebound of the blade..
  • 【Easy to operate】：The pipe cutter i....
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【[Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

QWORK 4 Pack Copper Pipe Cleaner and Reamer Set, 4 In 1 Pipe Deburring Brush Inner Outer Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes

  • Package Contents: Includes 2 pieces of 4-in-1 pipe cleaning brushes and 2 pieces of inner-outer reamer,.
  • Fit: The reamer is suitable for 3/16 inch to 1-1 / 2 inch pipe diameter, ideal for PVC PPR Copper Brass Aluminum Pipes..
  • Advantage: It can remove burrs in clockwise and counterclockwise directions. Can also clean the inside and outside of most pipes..
  • Usage: Rotate the screw switch to adjust the distance of the cutting wheel. Suitable for cleaning, polishing, paint removal/ rust removal of metal part..
  • Durable: Pipe reamer - Plastic, internal deburring blade - alloy steel, and brush - stainless steel, anti-rust, durable to use..
Check Stock

Multi Angle Miter Shear Cutter Hand Tools,45-135 Degree Adjustable Angle Scissors Trim Shears Tools

  • Designed to cuts tile trim, PVC piping, quarter round, tack strip and other light materials..
  • Suitable for cutting PVC PPR PE plastic pipe, timber strips, wire, ect. Can't cut hard wood..
  • MULTI DEGREE: The sharp blades have a cutting angle of 45, 60, 75, 90, 105, 120, 135 degrees, allowing you to freely cut differently shaped wire slots....
  • HIHG QUALITY: Sturdy steel frame with plastic cover handle for comfortable diagonal cutting, not suitable for cutting metal and stainless steel..
  • Non-slip ergonomic handle, time and labour saving, easy to cut..
Check Stock

2 Pieces Inner-Outer Reamer Pipe and Tube Deburring Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes (Red)

  • Package content: you will get 2 pieces tube reamer in red color, which are nice tools applied for removing burrs from pipe edges, and enough quantity can meet your daily needs or replacement.
  • Durable material: the main body of the pipe reamer is made of plastic, which is strong and durable, and the internal deburring blade is made of hardened alloy steel, which can provide you with long-lasting use.
  • Size: the reamer is suitable for the diameter of pipes from 3/16 inch to 1-1/2 inch, and it can be applied for pipes of various materials such as PVC, PPR, copper, aluminum, brass, aluminum and so on.
  • Easy to use: the alloy steel blade can cut copper, aluminum, brass and plastic pipes and other types of tubing quickly and accurately, and you can rotate the screw switch to adjust the distance of the cutting wheel back and forth.
  • Convinent design: the burrs can be removed in both clockwise and counterclockwise directions, and the tube reamer is suitable for the inside and outside of the pipeline to use.
  • The screw of the pipe cutter can easily control the cutting pressure for clean cutting.
Check Stock

90 pcs, 90/180/360 Angle Sprinklers Miniature Garden Lawn Water Spray Atomization Sprinkler Nozzle Irrigation System Plant Waterer Garden Irrigation Sprinkler

  • It is not easily deformed, reliable operation and long service life..
  • The spray head angle of rotation: 90°,180°,360°Simply to install into PVC/PPR/PE pipe..
  • Used for cooling, watering, humidification, and dust removal..
  • Suitable for agriculture, lawn, garden, terrace, etc..
Check Stock

HORUSDY 2-1/2\ Ratchet PVC Pipe Cutter for PEX,PVC,PPR and Plastic Hoses, SK5 Steel Blades Ratcheting Pipe Cutter Tool for Home Repairs and Plumbers

  • [High-Quality] This Pipe Cutter is made of high-quality aluminum alloy and manganese steel.Its tough and durable..
  • [Safe and Convenient] The pipe cutting machine adopts the ratchet drive technology to make the cutting smoothly and auto-locking function protects users away from injury..
  • [Cutting Capacity] Cutting capacity is up to 2-1/2 inch. suitable for most plastic (PVC,CPVC,PPR,PEX,PE,Rubber hose)and different layers tube..
  • Rubber-textured handle, comfortable to use, reliable to hold, and not easy to hurt. Buckle the safe lock,the tube cutter will save space to keep and store..
  • [Deburring Tool] The deburring tool is made of solid plastic structure and high-speed steel. It can be quickly, cleanly and conveniently applied to the inner diameters of different pipes..
Check Stock