Reviews Ppr End Cap

04529 for PPRK6 Plastic Pipe Fitting Reamer 6 Piece Kit fit into standard 1/2" drills PVC pipe reamer tool Contains PPR75, PPR100, PPR150, PPR200, PPR300 and PPR400

  • 【Scope of application】：PPR reamer is applicable to exhaust pipe, drain pipe and water pipe, and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400, 6 Piece,Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is ou....
Check Stock

04520 for PPRK5 Plastic Pipe Fitting Reamer 5 Piece Kit fit into standard 1/2\ drills PVC pipe reamer tool Contains PPR125, PPR150, PPR200, PPR300 and PPR400

  • 【Scope of application】：PPR reamer is applicable to exhaust pipe, drain pipe and water pipe, and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR125, PPR150, PPR200, PPR300, PPR400 5 Piece, in ahard plastic case.Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is our top priority, We strive to provide customers with quality services.If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days. P....
Check Stock

Tweezerman Slant Tweezer - Pineapple Punch Model No 1252-PPR

  • Item Condition: 100% authentic, new and unused. Tweezerman Slant Tweezer - Pineapple Punch Model No. 1252-PPR..
  • Tweezerman Slant Tweezer - Pineapple Punch Model No. 1252-PPR: Buy Tweezerman Tweezers - Grab hair on the go. Ideal size for makeup bag and travel....
Check Stock

Poulan 580940901 Chainsaw Gas Cap

  • Replaces old part numbers 577858501, 530047192 and 530047164.
  • Fits PP3816A, PP4218A, PPR4218A, PP3816A, PP4218A and PPR4218A.
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Juicer Double Low Mix

  • INDUSTRY LEADING: 15-YEAR coverage on parts and performance.
  • ENDORSED BY THE MEDICAL MEDIUM: “Everyone always asks me what juicer I use — and this is it… It’s the best juicer I’ve seen on the market…....
  • COLD PRESS SLOW JUICE FOR AN IMMUNITY BOOST: The 80 RPM low speed, dual stage masticating juicing produces minimal heat buildup and oxidation for....
  • SPECIAL CELERY ADJUSTABLE END CAP WITH GREEN INSERT: Your juicer comes with a special adjustable end cap that is to be every time you juice your....
  • FRUIT & VEGETABLE END CAP: The second adjustable end cap you receive is for juicing all other fruits and vegetables. Features a large feed chute so....
Check Stock

Home Right C800798 Roller Tune-Up Kit, Multicolor, 7 inches

  • HOMERIGHT PAINT ROLLER COVER: The Tune-up kit is everything you need to make your Home Right Paint Stick and Paint Stick EZ-Twist like new. Includes parts to rebuild piston and valve body with roller cover end caps and foam spacer..
  • EASY PAINT ROLLER: The new and improved Paint Stick EZ-Twist is the perfect upgrade to the original Paint Stick. Painting a room can be daunting, but the EZ-Twist easily allows you to paint and reduces the stress of painting your home.
  • PAINT ROLLER KIT COMES WITH: Includes inner end cap, foam spacer, outer end cap, outer snap cap, end cap sealant strip, Paint Stick EZ-Twist outer end cap, Paint Stick piston O-rings, Paint Stick EZ-twist piston quad-rings, duck valve, foam wiper, retainer ring and petroleum jelly.
  • : The Paint roller tune up kit with 2 years limited.
  • BEST PAINT ROLLER: With extended reach and more control, the EZ-Twist allows you to easily paint those hard-to-reach areas in your home such as stairways, hallways, and more.
Check Stock

Omega Juicer End Cap Replacement Part for Drum Unit #1 or #2 WHITE Color 8004 8003 8005 8006

  • Fits Omega juicers models 8003, 8004, 8005, 8006 – any drum version from these models will work.
  • Rubber gaskets come installed in the end cap and will creates a tight seal – preventing leakage from your juicer end cap.
  • The white drum cap fits on the end of the juicing drum unit.
  • White color which will replace machines with a white drum cap or black drum cap.
Check Stock

RealiNice V Brake Noodle Cable Guide Pipe with Boot Set (2 Pairs)

  • 【PERFECT FIT】Fully compatible with Shimano and Avid V Brake system..
  • 【DURABLE MATERIAL】stainless steel noodle, rubber boot, alloy cable end cap.
  • 【IMPROVED PARTS】Plastic catheter with lube, reduce brake cable friction, enhance braking performance..
  • 【FULL PROTECTION】Cable end cap prevent the splitting of the end of the cable core..
  • 【2 PAIRS SET】Including brake noodle x4, rubber boot x4, cable end cap x4.
Check Stock

Overdrive Button - Auto Transmission Overdrive Lockout Switch Button Gear Control Button & Cap Bezel for Ford 92-04 OEM Gear Shifter Button Cap Bezel

  • ✅【Various Fitment】 Fit for Ford 1992-2004. for Ford F150-Includes Both Overdrive Button Switch & End Cap Bezel 1992-2004.
  • (More Detailed Model Please Refer the Described Page) ..
  • (More Detailed Model Please Refer the Described Page)..
  • ✅【Brand New Product】100% brand new aftermarket product with premium quality. - overdrive button for Ford.
  • ✅【OEM Standard】 For many Models with 12mm Overdrive Button Switch At The End Of The Shifter, meet strict OEM requirements,100% brand new aftermarket product with premium quality. - overdrive switch.
  • ✅【High Quality】 The Overdrive Cap is made of high quality engineering plastic material, high temperature resistance and high reliability, durable for long time use..
  • ✅【Directly Replace】 Designed to fit many Mo....
Check Stock

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock