Reviews Ppr Cutter

PVC Pipe Cutter, Cuts up to 2-1/2\

  • 【Wide cutting range】： Pvc pipe cutter tool with the ratchet drive The tube cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PPR, PEX, PE, Rubber hose, etc.), The maximum opening is 63mm, After many tests, the cutting capacity up to 2-1/2-inch (63mm) outside diameter--Can not make a square cut..
  • 【Wide range of applications】：The JHWLKJ Pvc pipe cutter Widely used in life, This is quite convenient for your work and life. I think it is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mechanics..
  • 【Durability】：Made with SK5 Teflon Blade, good toughness, strength. Durable aluminum alloy handles are made to last for long time use.The triangle design at the edge of the knife allows better access to the pipe.Straight Cuts - Blade does not bend or break.You can use it to cut the pipe more smoothly..
  • 【Comfortable operation】：The professional tube cutter adopts ratchet drive technology to greatly save your strength to smoothly complete the cutting operation with one hand, which makes cutting more labor-saving and improves work efficiency. It also ensures automatic locking during the cutting process to protect the user from the rebound of the blade..
  • 【Easy to operate】：The pipe cutter i....
Check Stock

04529 for PPRK6 Plastic Pipe Fitting Reamer 6 Piece Kit fit into standard 1/2" drills PVC pipe reamer tool Contains PPR75, PPR100, PPR150, PPR200, PPR300 and PPR400

  • 【Scope of application】：PPR reamer is applicable to exhaust pipe, drain pipe and water pipe, and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400, 6 Piece,Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is ou....
Check Stock

Capri Tools 1-5/8 in. Ratcheting Pipe Cutter, Model: CP11290

  • The Ratcheting Pipe Cutter makes clean cuts in pipes and tubing effortlessly. True one-hand operation with non-return ratcheting mechanism makes getting the perfect cut easy.
  • V-shaped cutting blade is specially design to provide a clean cut. Ultra-sharp high carbon steel material helps make cutting effortless.
  • Blade with telescoping mechanism remains sheathed in the blade guard until the tool is engaged. Blade slider lets you quickly move the blade forward to meet the pipe instead of slowly ratcheting forward. Pushing the handle forward instantly releases the ratchet and sheathes the blade.
  • Replaceable blade with simple, tool-less blade replacement.
  • Cuts PVC, CPVC, PP, PE, PER, PEX, ABS, PEHD, PPR, and PB piping up to 1-5/8 in. in outer diameter. Durable and rust resistant all aluminum construction. Locking latch secures the pipe cutter when not in use.
Check Stock

Replacement Blade for Capri Tools 1-5/8 in. Ratcheting Pipe Cutter (CP11290-BD)

  • Replacement blade for Capri Tools 1-5/8 in. Ratcheting Pipe Cutter.
  • V-shaped cutting blade is specially design to provide a clean cut.
  • Ultra-sharp high carbon steel blade is made for precise and effortless cuts.
  • Cuts PVC, CPVC, PP, PE, PER, PEX, ABS, PEHD, PPR, and PB piping up to 1-5/8 in. in outer diameter.
Check Stock

04520 for PPRK5 Plastic Pipe Fitting Reamer 5 Piece Kit fit into standard 1/2\ drills PVC pipe reamer tool Contains PPR125, PPR150, PPR200, PPR300 and PPR400

  • 【Scope of application】：PPR reamer is applicable to exhaust pipe, drain pipe and water pipe, and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR125, PPR150, PPR200, PPR300, PPR400 5 Piece, in ahard plastic case.Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is our top priority, We strive to provide customers with quality services.If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days. P....
Check Stock

MacWork Exhaust Pipe Cutter, 0.6\ to 3.3\ Tailpipe Cutter, Chain Exhaust Cutter, Rolling Blade Design for Easy Cutting - Can Be Used as PVC Cutter or Copper Pipe Cutter

  • 【Wide Application】14 rolling blades(11.8").This pipe cutter cut through 15-85mm(0.6" to 3.3") pipes with a maximum thickness of 2.5mm(0.1")..
  • 【Effectively Cut】Perfect for cutting exhaust pipe and tailpipe of PPR, LOW CARBON STEEL and COPPER, not for use on stainless steel..
  • 【Built to Last】100% new and high quality. Powerful and robust.Corrosion resistant coated handle for Comfort.Designed to access where space is limited..
  • 【Keep Well-Oiled】Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item..
  • 【Cut Pipes Easily】Cut pipe with our pipe cutter tool in easy steps: 1.Wrap chain snug around pipe.
  • 4.Rotate handle back and forth to cut pipe.
  • 5.Repeat steps 3 and 4 until cut is complete..
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【[Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

IWISS PEX TUBING Cutter & KG-1096 F2098 Clamp Cinch Tool Kit Bundle

  • Plumbing Tools fits all pex cinch clamps except for Zurn Quick Clamp.
  • This tool is factory adjusted and does not require any additional calibration or adjustment.
  • This tool is universal and will work with Stainless Steel Clamps of sizes 3/8", 1/2", 5/8", 3/4" and 1" with Calibration Gauge.
  • Capacity: IWISS PPR PEX cutter is an easy to use, great value cutting tool to handle cutting 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in.....
Check Stock

Tanstic 3Pcs Ratchet PVC Pipe Cutter Tool and PEX Straight Cut Pipe Cutter with Mini Tube Cutter, Ratchet-type Pipe Cutter One-hand Fast Pipe Cutting Tool PEX Tube Cutters for Pipe Cutting

  • ✔️[Package Includes] You'll get 1pc ratchet-type pipe cutter with max opening of 1-5/8 inch (42mm) and 1pc straight pipe cutter with max opening of 1-3/8 inch (35 mm), 1pc mini tubing cutter, total of 3pcs, which can meet your needs of daily use..
  • ✔️[High-quality Material] Our blades of pipe cutters are made of high-quality SK5 material with Teflon-coated on the surface, durable, sturdy, sharp, not easy to rust or break, high-hardness, good-toughness, which can be used for a long time and help to cut the pipe accurately and effectively..
  • ✔️[Ratchet PVC Pipe Cutter] The large pipe cutter in this kit adopts ratchet drive technology, which enable you to complete the cutting operation with one hand, labor-saving. Besides, this ratchet drive design can provide the function of automatic locking during the cutting process, which can protect users from injury caused by the rebounding blade. And the ergonomic handle is equipped with rubber, comfortable to grip, anti-slip..
  • ✔️[Straight Cut Pipe Cutter & Mini Tubing Cutter] The handle of the straight pipe cutter adopts the lever principle, labor, saving, light, handy. You just need to put the pipe into the knife edge, and then pull and tighten the handle to cut the pipe accurately and evenly. Besid....
Check Stock

DOWELL PVC Pipe Cutter Ratchet Pipe Tube Cutter Cutting Tool Heavy Duty Teflon Coated Stainless Steel Blade Max Cutting O.D. Adjustable 1-5/8-inch to 2-1/2-inch 42-63mm HY040301

  • Ratchet Mechanism: Ratcheting design makes the pipe cutter powerful and labor-saving. You can only operate with one hand, more efficient and convenient..
  • Adjustable Max Cutting O.D.: Patented design, max cutting outer diameter of the pipe cutter can be adjusted from 1-5/8” to 2-1/2”(42 to 63mm). 1 equals 2 size pipe cutters, saving money..
  • TEFLON coated Stainless Steel Blade: V shaped, replaceable and precision grinding blade is sharp, durable, rust-proof, not easy to damage, cutting pipes and tubes quickly, smoothly and clean, no burrs..
  • Lightweight & Durable: Main body is made of fiberglass-reinforced nylon. Handle is made of aluminum alloy. Ergonomic & non-slip designed, labor-saving, less fatigue for long-time works. Stainless buckle will lock the cutter safely when you finish cutting..
  • Wide Application: Suitable for all kinds of plastic pipes and tubes, such as PVC, CPVC, PPR, PEX, PE, etc. Great for homeowners, plumbers, electricians, vehicle mechanics, household maintenance and repairs, plumbing works, etc..
Check Stock

Libraton 2-Piece Pipe Cutter Replacement Blade (Up to 1-5/8\) for PVC Pipe Cutter for Cutting Pipes of Plastics, PEX, PVC, PPR Plastic Hoses and Plumbing Pipe

  • Suitable for: pipes made of plastics, PEX, PVC, PPR.
  • Suitable for 42mm PVC cutter (ASIN:B08DHKXCY2).
Check Stock

HAUTMEC Multifunction Ratchet-type Tube and Pipe Cutter, One-hand Fast Pipe Cutting Tool for Cutting Up to 1-5/8 inch, 3-in-1 Tubes, Wire and Trunking cutter HT0257-TC

  • ...or smooth and faster cutting operation by one hand with no return of the blade during cutting, making cutting more labor-saving and efficient. Firmly securing the blade, the automatic locking mechanism protects users from the rebound of the blade during the cutting.
  • 【3-in-1 Tool Function】Serves as a plastic tube cutter, wire-cutter and trunking-cutter. Material cut: PVC, PP, PE, PER, PEX, ABS, PEHD, CPVC, PPR, PB, multilayer with an outer diameter below 42mm. Integrated wire-cutter: max Ø: 12 mm, max cross section: 4G2.5 mm². Integrated electric trunking cutter: maxi 25 x 12.5 mm (PC 42). It is an essential cutting tool for home handymen, plumbers, electricians, and vehicle mechanics.
  • 【20% Labor-saving Blade】Equipped with a V-shaped pipe blade with teflon coating, this pipe cutters boasts extremely smooth sliding, rust resistance and durability. On average, the cutting load is reduced by 20% versus with a blade with a typical coating. Heat-treated blades are not easy to rust or break and stay sharp in the harshest environments. Tool-free blade change is available. See ASIN: B0B5ZYBR1C.
  • 【Ergonomic Handle】The ergonomic soft-touch handle features soft coating, which is non-slip, wear-resistant and provides extra comfort. The shape of the uppe....
Check Stock