Reviews Ppr Brass Insert

04520 for PPRK5 Plastic Pipe Fitting Reamer 5 Piece Kit fit into standard 1/2\ drills PVC pipe reamer tool Contains PPR125, PPR150, PPR200, PPR300 and PPR400

  • ...nd solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR125, PPR150, PPR200, PPR300, PPR400 5 Piece, in ahard plastic case.Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is our top priority, We strive to provide customers with quality services.If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

Reed Tool PPR200 Clean Ream Extreme with 3/8-Inch Hex Shaft, 2-Inch Head

  • Reams 2-Inch Sch. 40 PVC, CPVC and ABS Fittings.
  • Can be used with standard drills, cordless drills, or impact drills.
  • Works great for vent lines, drain lines, water lines.
  • Feature a 4-sided carbide insert which provides an extra cutting edge after 180-Degree cutting insert rotation.
  • PPR Fitting Reamers are NOT recommended for use on pressurized systems.
Check Stock

Tweezerman Slant Tweezer - Pineapple Punch Model No 1252-PPR

  • Item Condition: 100% authentic, new and unused. Tweezerman Slant Tweezer - Pineapple Punch Model No. 1252-PPR..
  • Tweezerman Slant Tweezer - Pineapple Punch Model No. 1252-PPR: Buy Tweezerman Tweezers - Grab hair on the go. Ideal size for makeup bag and travel....
Check Stock

Poulan 580940901 Chainsaw Gas Cap

  • Replaces old part numbers 577858501, 530047192 and 530047164.
  • Fits PP3816A, PP4218A, PPR4218A, PP3816A, PP4218A and PPR4218A.
Check Stock

iCrimp PEX Pipe Cutters for Cutting 1/8 -1 PEX Tubings NOT for PVC Pipes

  • Capacity:PPR PEX cutter is an easy to use, great value cutting tool to handle cutting 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in. PEX A, B, C pipe..
  • Easy Operation: Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. The choice of both DIY home-owner and professional plumbers. Cuts PEX like butter..
  • Compact Design: It's compact enough to fit in your pocket or tool box so you can always have it on hand when you need it..
  • Shear Cutting: Use this PEX tool to create a clean and burr free cut for either Push to Connect PEX fittings or brass crimp fittings..
Check Stock

2 Pieces Inner-Outer Reamer Pipe and Tube Deburring Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes (Red)

  • Package content: you will get 2 pieces tube reamer in red color, which are nice tools applied for removing burrs from pipe edges, and enough quantity can meet your daily needs or replacement.
  • Durable material: the main body of the pipe reamer is made of plastic, which is strong and durable, and the internal deburring blade is made of hardened alloy steel, which can provide you with long-lasting use.
  • Size: the reamer is suitable for the diameter of pipes from 3/16 inch to 1-1/2 inch, and it can be applied for pipes of various materials such as PVC, PPR, copper, aluminum, brass, aluminum and so on.
  • Easy to use: the alloy steel blade can cut copper, aluminum, brass and plastic pipes and other types of tubing quickly and accurately, and you can rotate the screw switch to adjust the distance of the cutting wheel back and forth.
  • Convinent design: the burrs can be removed in both clockwise and counterclockwise directions, and the tube reamer is suitable for the inside and outside of the pipeline to use.
  • The screw of the pipe cutter can easily control the cutting pressure for clean cutting.
Check Stock

ICOOL Inner-Outer Pipe Reamer/Tube Deburring Tool 3/16 to 1-5/8 inch for Copper PPR PVC Brass Aluminum Soft Steel Tubing and Pipes

  • 【Capacity】The reamer is suitable for the diameter of tubing and pipes from 3/16 to 1-5/8 inch..
  • 【Versatile Tools】Prepares for tubing soldering, removes burrs from sharp edges, such as copper, PPR, PVC, brass, aluminum, soft steel tubing and....
  • 【Efficient Tools】Specifically designed for various tubing with tight space. The reamer is suitable for the inside and outside of the pipeline to....
  • 【Sturdy Design】Long wearing steel blades for a long service time. Grooved durable hard plastic body for better grip..
  • 【Multiduty】Reamer can work perfectly especially in tube cutting, deburring copper pipes in the air conditioner installation and vehicle repair..
Check Stock

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

  • S60X6 Coarse Thread – The IBC tank adapter has a brass tap and a detachable tap fitting, suitable for most ibc standard containers, where the support thread is s60x6 coarse thread. The diameter is 60mm (23.36in) and the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

  • S60X6 Coarse Thread – The IBC tank adapter has a brass tap and a detachable tap fitting, suitable for most ibc standard containers, where the support thread is s60x6 coarse thread. The diameter is 60mm (23.36in) and the spacing is 6mm (0.24in), please check carefully for any problems before purchasing.
  • High Quality Brass & NO Leaking – The IBC tote adapter is made of high quality brass, which is resistant to acid and alkali, more wear-resistant, and the faucet is not easy to damage. With sealing ring, it can effectively avoid water leakage. Easy switching, long life, 3rd generation in 2022.
  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
Check Stock

QWORK 4 Pack Copper Pipe Cleaner and Reamer Set, 4 In 1 Pipe Deburring Brush Inner Outer Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes

  • Package Contents: Includes 2 pieces of 4-in-1 pipe cleaning brushes and 2 pieces of inner-outer reamer,.
  • Fit: The reamer is suitable for 3/16 inch to 1-1 / 2 inch pipe diameter, ideal for PVC PPR Copper Brass Aluminum Pipes..
  • Advantage: It can remove burrs in clockwise and counterclockwise directions. Can also clean the inside and outside of most pipes..
  • Usage: Rotate the screw switch to adjust the distance of the cutting wheel. Suitable for cleaning, polishing, paint removal/ rust removal of metal part..
  • Durable: Pipe reamer - Plastic, internal deburring blade - alloy steel, and brush - stainless steel, anti-rust, durable to use..
Check Stock

40 Cal Gun Shot X3

  • 【Suitable for Caliber】: The pistol cleaning kit suitable for .357cal./9mm, .40cal.,.45cal.Including 3 bronze brush, 3 cot*on mop,3 brass jag,2 cleaning rods,1 aluminum handle, 1 patch holder, 1 muzzle guard,1 empty oil bottle,1 storage box with blister..
  • 【ALL BRASS】: Solid rods,brass cleaning jags are made of high quality brass,strong enough to avoid excessive bending or breaking. Comparing with brass rods and cheap plastic tips brass material, brass material is much softer than bore steel and more durable. With this set you will not experience the frustration of having a scratch on the surface of your gun barrel or a broken jag/tip inside of it..
  • 【Insert Tray】: A quality durable gun maintenance kit case whose design is that holding an insert tray containing gun cleaning tools.
  • They are clearly labeled and snap securely into place keeping things organized..
  • 【Easy to Carry】: Keeps everything neatly organized.
  • The whole set of tools is small and easy to carry around. Gift box package, a thoughtful gift for the beginner or professional gun player..
  • 【Multiple Combinations of Recycling】: A variety of tools can be combined,and the kit can be recycled multiple times..
Check Stock

FUATY 3/4” NPT Plug Male Thread PPR Pipe Plugs and Caps Garden Irrigation Tubing Stopper Drain Plug Compatible with RV Irrigation Water Supply Lines

  • TYPE: 3/4 Inch NPT Male Thread Pipe End Connector Plugs.
  • MATERIAL: Made of quality PPR, corrosion resistance, high strength, and less weight then metal ones.
  • FUNCTION: Plug for closing the end of a pipe or fitting, helps keep dirt out on the line.
  • And it is also a perfect product to winterize outdoor pipe....
  • APPLICATION: Great for agriculture, lawn, garden, patio, greenhouse, swimming pool, misting fog cooling, irrigation, watering, humidification, balcony....
  • PACKAGE INCLUDE: 5Pcs Garden Irrigation Male Threaded PPR End Cap.
Check Stock

LiGuVCY Universal Hydraulic Pipe Expander Tool for Aluminum Copper HVAC Pipe with Pipe Expander and 7 Pcs Pipe Expander Heads 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8 Inch

  • Capacity:PPR PEX cutter is an easy to use, great value cutting tool to handle cutting 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in. PEX A, B, C pipe..
  • Easy Operation: Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. The choice of both DIY home-owner and professional plumbers. Cuts PEX like butter..
  • Compact Design: It's compact enough to fit in your pocket or tool box so you can always have it on hand when you need it..
  • Shear Cutting: Use this PEX tool to create a clean and burr free cut for either Push to Connect PEX fittings or brass crimp fittings..
Check Stock