Reviews Pp r Pipes Fittings

GeilSpace 6 Pack 1/2\ × 16\ Pre-Cut Black Metal Pipe, Industrial Steel Fits Standard Half Inch Black Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (1/2\ × 16\

  • SIZE - 1/2" Steel Pipe, 16 Inches (40.6cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
  • MATERIAL & PRODUCTS - GeilSpace Pipes are designed with a standard industrial finish.
  • materials and threads constructed from sturdy metal.
  • Unlike most other products on Amazon with grey looking and oily surface, surface of these product series is clean and PAINTED black, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we o....
Check Stock

GeilSpace 6 Pack 3/4\ × 14\ Pre-Cut Black Metal Pipe, Industrial Steel Fits Standard Three Quarters Inch Black Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (3/4\ × 14\

  • SIZE - 3/4" Steel Pipe, 14 Inches (35.6cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 3/4" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective paint at both ends makes pipes hard to screw into fittings, please remove the black paint. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 3/4" pipes. (O.D. of these pipes: 25.5mm.
  • MATERIAL & PRODUCTS - GeilSpace Pipes are designed with a standard industrial finish.
  • materials and threads constructed from sturdy metal.
  • Unlike most other products on Amazon with grey looking and oily surface, surface of these product series is clean and PAINTED black, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer t....
Check Stock

Patioer R134A Refrigerant Charging Hose Gauge, Refrigerant Recharge Hose Kit with 3 Pack BPV-31 Bullet Piercing Tap Valve Kit for Car AC Air Conditioning Refrigerant Charging Can to R-12/R-22 Port

  • PACKAGE INCLUDES 5 PACKS: 3 x BPV-31 bullet piercing tap valve kits, each one contains 1 piercing valve, 1 hex key and 2 adapters.
  • 1x R134A U-charge hose with gauge and can tap.
  • PREMIUM MATERIAL: Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use..
  • R134A CHARGING HOSE: 15.3inch/39cm long, with R-134a can connect R-12 / R-22 service port, 1/2" end port fits for R12, R22, R502 fittings. And the gauge has scale readings for R134, R12, and R22. 90-degree push and lock coupler can auto shut off..
  • EASY TO INSTALL: BPV-31 bullet piercing tap valve kits are equipped with hexagonal wrench of suitable size, which is more convenient to install. Use the retrofit valve to attach the gauge with bullet piercing tap valve..
  • UNIVERSAL RETROFIT VALVE:  Retrofit valve converts from R-12 to R-134a. Fit for 7/16 inch low side port.
  • Suit for vehicles pre-1994, comes with R-134a refill fittings. Replace AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes..
Check Stock

GeilSpace 4-Way, Malleable Iron Pipe Fittings - Vintage DIY Industrial Shelving, Industrial Decor, Furniture DIY (3/4\

  • SIZE - 4-Way Fits Standard 3/4" Threaded Pipes and Fittings. NOTE: These items are PAINTED BLACK..
  • MATERIAL & PRODUCTS - GeilSpace Pipes and Fittings are designed with a standard industrial finish.
  • materials and threads constructed from sturdy cast iron.
  • Unlike most other products on Amazon with grey looking and oily surface, our products’ surface is black and clean after high temperature paint, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES – Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs..
  • GUARANTEE&DELIVERY: We promise to provide you with good quality products and services to your satisfaction. If you are not satisfied with our products, 100% guaranteed return of goods. The goods will be sent in 1-3 business days for Amazon Prime Members, and 1-5 bu....
Check Stock

Manufacturer Direct PVC Pipe Schedule 80 Industrial Grade Grey 1/2 Inch (.5) Grey/PVC - 4FT

  • MATERIAL & PRODUCTS - GeilSpace Heavy Duty Pipes are designed with a standard industrial.
  • materials and threads constructed from sturdy metal.
  • our products’ surface is coated with a rust preventive oil during manufacturing process, and you can seal it after cleaning..
  • MORE CHOICES - Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs. You can also find BLACK PAINTED pipes and fittings in our store..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • GUARANTEE - We promise to provide you with good quality products and services to your satisfaction. If you are not satisfied with our products, 100% guaranteed return of goods. We guarantee delivery within 1 to 3 business days for Prime members and 1 to 5 business days for non-prime members..
Check Stock

Mudder Bpv31 Piercing Valve 134a Kit R134a Refrigerant Charge Hose with Gauge, Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/r22 Port Ac 1/2 and Universal Retrofit Valve with Dust Cap

  • ...ce area for installation and use, and you only need 1 hex key wrench (included) to install the kit.
  • If you want to attach the gauge with BPV piercing tap valve, you need a retrofit valve (included).
  • R134a Charging hose: 19 inch hose with R-134a can to R-12/R-22 service port connection, 1/2 inch end fits R12, 22, 502 fittings.
  • And the gauge has scale readings for R134, R12, and 22. 90-degree push and lock coupler with auto shut off.
  • Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
  • Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
  • Suit for vehicles pre-1994, comes with R-134a refill fittings.
Check Stock

Spears 817 Series PVC Pipe Fitting, 45 Degree Elbow, Schedule 80, 2' Socket

  • 45-degree elbow for connecting two pipes or fittings at an angle.
  • Socket ends for connecting to male pipes or fittings.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

NIBCO - K05540C C4807 2 HXH 90 ELBOW PVC, White, 2' (C48072)

  • 90-degree elbow for connecting two pipes or fittings at an angle.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Pipe Décor Desk Outside Leg Set, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, Classic H Design, 28.75-in H x 21.5-in W, 3/4-in Diameter, 2-Pk

  • ...5-in diameter, assembled leg specs 28.25-in tall and 21.25-in wide.
  • Includes 2 “H” table legs comprised of (4) 3/4-in x 8-inch pipes, (4) 3/4-in x 18-in pipes, (2) 3/4 -in x 16-in pipes, (8) 3/4-in round flanges, (4) 3/4-in tees, (16) screws, instructions, and a clean and seal sheet.
  • pipes and fittings are industrial grade malleable iron and come in a standard steel grey color, commonly known as black within the plumbing industry.
  • PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
  • You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
  • easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
  • PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
  • we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
  • sealing the pipe with polyurethane spray will protect it from rust and scratches.
Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

  • Hex bushing for connecting two pipes with different diameters.
  • 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Pipe Décor Desk Inside Support Leg, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, for Classic H Design Desks or Tables, 28.75-in H x 11.75-in, 1-in Diameter, 1-Pk

  • ...cs 3.5-in diameter, assembled leg specs 28.75 inches tall and 11.75-in wide.
  • Includes 1 “H” support table leg comprised of (2) 1-in x 8-in pipes, (2)1-in x 18-in pipes, (1) 1-in x 6-in pipes, (4) 1-in round flanges, (2) 1-in tees, (8) screws, instructions, and a clean and seal sheet.
  • pipes and fittings are industrial grade black steel and malleable cast iron.
  • standard steel grey color, commonly known as black within the plumbing industry.
  • PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
  • You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
  • easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
  • PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
  • we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
  • sealing the pipe with polyurethane spray will protect it from rust and scratches.
Check Stock

1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)

  • 3/4 INCH PIPE ELBOW – TEN PACK: Our Brooklyn Pipe cast iron fittings 10 pack elbow pipes are made with from superior steel with 100% durability and strength and provides you with great flange elbow fittings at a very affordable price..
  • PERFECT FOR DIY: Whether you’re looking to build a pipe shelf, pipe towel rack, pipe lamp, our malleable 90 degree elbow industrial fitting is up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water..
  • RAW IRON: Our 3/4 inch black malleable iron pipe fittings are raw and unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron, it’s normal for your hands to get dirty. You’ve probably seen iron workers in movies, they don’t come home clean!.
  • ONE CONVENIENT PACK: Our 3/4 90 degree elbow threaded flanges fittings pipes give you 100% super convenient benefits than other bands because our Brooklyn Pipe elbow is designed to be compatible with your all project parts.
  • UNLEASH YOUR CREATIVITY: We inspect and pack each pipe fitting and we offer a LIFETIME warranty on our products, just give us a call or send an e-mail. Now, with our black pipes bring the rustic, industrial style into your home, office or any inte....
Check Stock

10-2 Plastic Triglides Slides

  • Coupling for connecting two pipes with the same diameter in a straight run.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock