Reviews Power Tool Armature

Makita 9557NB 4-1/2\ Angle Grinder, with AC/DC Switch, Teal

  • Powerfull 7.5 AMP motor delivers 11,000 RPM for high output power.
  • Compact design with small 2-1/2" diameter barrel and weighs only 4.5 lbs. for added comfort.
  • Protective zig-zag varnish seals the armature from dust and debris for longer tool life.
  • Labyrinth construction seals and protects the drive gear and bearings from contamination for longer tool life.
  • AC/DC switch for use with alternative power source.
Check Stock

Kobalt 5-in 24-Volt Max-Volt Cordless Angle Grinder

  • Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds).
  • Small diameter barrel grip (only 2 to 1/2 inches) for added comfort.
  • Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life.
  • Lock on/off feature for continuous operation.
  • AC/DC switch for use with alternative power source.
  • Protective zig zig varnish seals the armature from dust and debris for longer tool life.
  • Extra large paddle switch for comfortable operation.
  • Thicker coil wires are wound more closely to reduce heat and energy loss.
  • All ball bearing design and metal gear housing for durability.
  • (1) 4 1/2inches General Purpose Turbo Rim Diamond Blade A 94552.
  • (5) 4 1/2 inches 24 Grit Grinding Wheels.
Check Stock

Makita 9557PBX1 4-1/2\ Paddle Switch Cut-Off/Angle Grinder

  • Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds).
  • Small diameter barrel grip (only 2 to 1/2 inches) for added comfort.
  • Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life.
  • Lock on/off feature for continuous operation.
  • AC/DC switch for use with alternative power source.
  • Protective zig zig varnish seals the armature from dust and debris for longer tool life.
  • Extra large paddle switch for comfortable operation.
  • Thicker coil wires are wound more closely to reduce heat and energy loss.
  • All ball bearing design and metal gear housing for durability.
  • (1) 4 1/2inches General Purpose Turbo Rim Diamond Blade A 94552.
  • (5) 4 1/2 inches 24 Grit Grinding Wheels.
Check Stock

DEWALT Angle Grinder Tool, 7-Inch/9-Inch, 5.3-Horsepower (D28499X)

  • High power 5.3 HP (maximum motor HP) and 6,000 rpm motor of angle grinder with overload protection provides higher operating speeds under load.
  • Rotating rear handle provides improved ergonomics in cutting and grinding applications for the metal grinder.
  • 5-position side handle of DEWALT angle grinder provides improved ergonomics for specific applications.
  • Epoxy coated field and armature provide long service life against abrasion from airborne debris.
  • Low-profile gear case allows for work in tight areas.
  • Keyless adjustable guard provides tool-free guard adjustments to increase productivity.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
  • 6,000 RPM provides optimal material removal with 9-inch grinding wheels.
  • 2-wire double insulated 'S' jacket rubber cord provides increased durability and life in hot and cold climates.
Check Stock

Robertshaw IMV-708 Dual Icemaker Water Valve Fits Whirlpool W10408179 4389177 K-75717 2186486 2205762 2188622 4389177 2255457 2188708 2188746 2304757 2304833 2315534 X74QC1

  • Direct Acting Armature Provides High Flow Capacity With Minimum Power Requirements.
  • Encapsulated Coil Provides High Mechanical And Dielectric Strength, And Is Moisture Resistant.
  • Unique Armature And Seat Design Reduce Unwanted Particles From Entering The Armature Area.
  • Armature Is Designed With Clearances Which Minimize The Possibility Of Jamming Due To Foreign Materials.
  • Bodies Are Made Of Polypro Which Provides High Resistance To Corrosion And Mineral Deposits.
Check Stock

Metabo HPT Angle Grinder, 4-1/2-Inch, 8-Amp, AC/DC, Top Switch (G12SA3)

  • Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT.
  • Delivers a powerful 8 Amps with 910 watts of input power and a class leading 1,900 Watts of output power to grind through the toughest applications with ease.
  • Achieves highest overload durability in its class thanks to an improved cooling mechanism and the high output motor for efficiency and higher resistance to burnout.
  • Improved dust protection for the motor resists wear on the armature and field coils for longer tool life under the usual harsh conditions.
  • On/Off switch mounted on the top allows the user to comfortably operate the tool whether right or left handed.
  • A one-touch quick off mechanism provides added safety.
  • Easy to manipulate spindle lock located at the front of the grinder makes it simple to change out the accessories as needed.
Check Stock

Westone UM Pro30 High Performance Triple Driver Universal Fit Earphones-Green, 78394, Pro 30

  • TRIPLE BALANCED-ARMATURE DRIVERS WITH THREEWAY CROSSOVER: The UM Pro 30 features three proprietary balanced-armature drivers with a 3-way passive crossover and is our most popular IEM. Designed for performing musicians, the UM Pro 30 has a soundstage that features powerful lows, articulate mid-range, and crystal-clear highs. The UM Pro 30 has the performance, power, and output for any stage and will meet the demands of the most discerning musician and music lover alike..
  • THE MOST COMPACT, LOW PROFILE, ERGONOMIC DESIGN IN THE WORLD: Designed and built to perform in the most demanding environments, the compact, low-profile, ergonomic design of the UM Pro 30 is incredibly comfortable, and can be worn for hours and hours. Westone’s silicone and comfort foam eartips enhance the performance of our IEMs by providing superior noise isolation and ensuring a superb fit..
  • TWISTED MMCX AUDIO CABLE: Westone’s professional-quality MMCX Audio Twisted Cable is manufactured using high-strength, high-flex, ultra-low resistance tensile wire, which is reinforced with a special aramid fiber. Twisted to help reduce cable noise and keep the cable light-weight, flexible, and comfortable, our cable features MMCX Audio Connectors and 3.5mm stereo plug. Built to withstand th....
Check Stock

POPETPOP Labs Science Magnet Set Horseshoe Compass Magnets Kit Education Science Experiment Tools

  • Measures approximately 4.75" x 4" x 1.75" (12 x 10 x 4.5cm).
  • Magnet comes as two coils wrapped on a U-shaped metal frame with attached armature.
  • Connect to a power supply at 4-6V and start magnetizing.
  • Great tool for teaching electromagnetics in the classroom.
  • Can be used to pick up metal objects, filter magnetics, and build pendulums.
Check Stock

Makita GD0800C 1/4\ SJS™ Die Grinder, Teal

  • Powerful 6. 6 AMP motor delivers 7, 000-28, 000 RPM for faster material removal.
  • SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load.
  • Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
  • Electronic current limiter helps protect the motor from overload.
  • Directional air-flow vents channel the tool's air output away from the user's face.
  • Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life.
  • Zig-zag varnish protects the armature coil from dust and debris for longer motor life.
Check Stock

9\\\ Angle Grinder

  • Lower vibration rear and side handles includes soft grip for more comfort and control.
  • Externally accessible brushes for easy serviceability.
  • Large rubber tool rest to help protect tool and surfaces from damage.
  • Rugged all metal gear housing for added protection.
  • Protective zig-zag varnish seals the armature from dust and debris for longer tool life.
  • Ideal for welders, stone finishers, masons, fabricators and more.
Check Stock

Makita 9557NB2 4-1/2\ Angle Grinder, with AC/DC Switch (2 Pack)

  • 7.5 AMP motor delivers 10,000 RPM for high output power.
  • Compact design with small 2-1/2" diameter barrel and weighs only 4.5 lbs. for added comfort.
  • Protective zig-zig varnish seals the armature from dust and debris for longer tool life.
  • Labyrinth construction seals and protects the drive gear from debris.
  • Slide switch is located on side of the motor housing that can be re-positioned every 90Degree.
Check Stock

Electric Magnetic Door Lock 280kg, Strong Force Access Control for Door Cabinet Drawer, Magnetic Gate Lock for Door Lock Gate Lock for Metal Door Wooden Door

  • ...cks, its advantages are strong suction, low power consumption, stable and reliable quality, and electromagnetic locks will generate strong suction to tightly absorb the adsorption iron plate to achieve the effect of locking the door..
  • MAGNETIC DOOR LOCK-This electric magnetic lock consists of an electromagnet and an armature plate used for access control door locks. By attaching this to the door frame and the armature plate to the door, a current passing through the electromagnet attracts the armature plate, holding the access control door lock shut. When power off, the door will open..
  • SECURITY MAGNETIC GATE LOCK-This electric magnets can obtain the actual 280kg linear tension, designed with anti-theft screws, and the bottom is engraved with sunshade, which is non-slip and durable. Built-in directional surge protection, safe and durable..
  • MAGNETIC HOLDINGS FORCE LOCK-the size of this magnetic holdings force lock is approx 25 * 5 * 2.5cmcm/ 9.84 * 1.96 * 0.98inch, Unlocking method support Power-on to lock, power-off to unlock, This electromagnetic lock is especially suitable for shops, etc. commercial access control will be a very practical door lock, worthy of your choice!.
Check Stock

Makita GA9060 Angle Grinder, with No Lock-On Switch, 9'

  • Rear handle trigger switch with no lock-on feature.
  • lock-off feature requires two actions to start the grinder.
  • Redesigned motor with greater armature stability and larger commutator bars for 3 times longer life compared to previous model.
  • Zig-zag epoxy on both sides of the armature coil and a powder-coated field for added protection from Filth and debris for longer motor life.
  • Labyrinth construction seals and protects the motor and bearings from Filth and debris for longer tool life.
  • Spiral bevel gears for smoother rotations and a more efficient transfer of energy.
Check Stock