Reviews Power Supply Kits

Sovol SV01 Upgraded 3D Printer 95% Pre-Assembled with Direct Drive Extruder Meanwell Power Supply Glass Plate & Built-in Thermal Runaway Protection 280x240x300mm

  • ★ Direct Drive Extruder ★: Sovol SV01 features with direct drive extruder and dual Z lead screw, greatly increase its printing stability and....
  • ★ Meanwell Power Supply ★: Built-in branded Meanwell power supply ensures stable and sufficient power, heat up the hotbed and nozzle fast.....
  • ★ Removable Glass Plate ★: This 3D printer comes with a flat glass plate on the regular heated bed, greatly resolving warped bed issues. No matter....
  • ★ Semi-Assembled Kits ★: Sovol Direct Drive Extruder 3D Printer comes with several partially assembled kits, just only take you at most 30 minutes....
  • ★ Sovol Support ★: All of our products are shipped to the consumer directly from the manufacturer, we provide lifetime technical assistance.....
Check Stock

Complete 6KW Off-Grid Solar Power Station 120V/240V Split Phase Solar Energy Storage System

  • Split phases 120V 3KW / 240V 6KW continuous output power (12KW surge).
  • Standalone Working for Off-grid Power Supply..
  • Supports UPS and Backup Power supply mode..
  • Easy DIY: Inverter, solar charger, battteries are all-in-one prewired unit..
Check Stock

S-Pixie CW QRP Ham Amateur Shortwave Radio Transceiver 7.023 7.050 Mhz DIY Kits with Transparent Acrylic Shell

  • "PIXIE" is mini the 40 meter band simple micro-power amplitude telegraph transceiver, 9 ~ 13.8V DC power supply.
  • Resistance to change is a horizontal packaging vertical packaging, easy to solve the short-circuit resistance has long been a problem..
  • Power input does not distinguish between positive and negative, and to improve the power supply range, the user can easily use 13.8V communication power supply, and do not worry about the positive and negative reversed losses..
  • Increasing the transmitter side as the buzzer sound prompts (using a jumper cap shielding sound), an increase of LED lights as transmitters prompt..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thx.
Check Stock

Official Creality Ender 5 Pro 3D Printer Upgrade Silent Mainboard with Metal Extruder Frame Use Capricorn Bowden PTFE Tubing 220 x 220 x 300mm Build Volume

  • Upgraded Silent Mainboard : Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and more....
  • Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing....
  • Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving....
  • Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes..
  • Semi-Assembled Kits: Creality ender 5 pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
Check Stock

Official Creality Ender 5 Pro 3D Printer Upgrade Silent Mother Board Metal Feeder Extruder and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm Build Volume

  • Upgraded Silent Mainboard V4.2.2: Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and....
  • Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving....
  • Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing....
  • Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110¡æ in 5 minutes..
  • Semi-Assembled Kits: Ender 5 Pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
Check Stock

Tattoo Foot Pedal Cast Iron Tattoo Machine Power Supply Body Art Tattoo Machine Foot Switch for Tattoo Salon

  • 【Tattoo Foot Pedal】The tattoo foot pedal is made of high quality cast iron which makes it heat resistant,safe and durable for long-term use..
  • 【Built-in Switch】Built-in switch,mainly used to control the switch of tattoo machine,more stable and longer service life..
  • 【Anti-slip Design】This tattoo foot switch adopted anti-slip surface design,the non-slip groove at the top is good-looking and practical,can be a better fixation.It makes you not feel tired for long time work..
  • 【Wide Use】The connect line is long enough to connect your tattoo foot pedal to power supply.This tattoo pedal is the best choose for tattoo power supply,tattoo machine guns,tattoo kits and tattoo supplies..
  • 【Easy To Use】The tattoo pedal switch is suitable for any tattoo power supply.Just connect this tattoo pedal to the tattoo power supply and you can easily use it..
Check Stock

Hamshack Raspberry Pi: Learn How To Use Raspberry Pi For Amateur Radio Activities And 3 DIY Projects

  • The transceiver worked fine on transmit and receive. The plexiglass case still had the brown paper protective layer on it..
  • The use of horizontal resistors and horizontal diodes (upside down welding) makes the welding process not easy to short-circuit..
  • It uses a high-end potentiometer, no manual tools are needed to adjust the beat frequency, and it can be adjusted manually..
  • The power supply does not distinguish between positive and negative poles (Recommended battery or linear power supply), the power supply range is increased to 9~13.8V，>500mA..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thx.
Check Stock

KAT Percussion KT3M Digital Drum Sound/Trigger Module

  • Advanced sound module with 550 internal sounds.
  • 45 Preset Drum Kits & 25 additional user programmable kits.
  • 100 Built-in Play along tracks, Learning Mode.
  • Push button interface, USB 2.0/ Midi Ports.
  • Includes wire harness, 2 additional trigger cables and Power supply.
Check Stock

S-Pixie HAM Transceiver Radio Shortwave Telegraph 40m Super CW QRP 7.023 MHz DIY Kits with Shell Large Potentiometer

  • The transceiver worked fine on transmit and receive. The plexiglass case still had the brown paper protective layer on it..
  • The use of horizontal resistors and horizontal diodes (upside down welding) makes the welding process not easy to short-circuit..
  • It uses a high-end potentiometer, no manual tools are needed to adjust the beat frequency, and it can be adjusted manually..
  • The power supply does not distinguish between positive and negative poles (Recommended battery or linear power supply), the power supply range is increased to 9~13.8V，>500mA..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thx.
Check Stock

Shure PA411 Four Port Antenna Combiner

  • Distributes DC power and RF signal while reducing rack clutter for up to four PSM300 systems.
  • Features a wideband 470-865 MHz frequency range.
  • Main RF output connector connects to any antenna with a BNC connector.
  • RF LED indicators display signal present and signal overload per input.
  • Power output distributes DC power to PSM transmitters (accessory power cable required).
  • Includes PA411, rack mount and hardware kits, 1/4 wave antenna, BNC bulkhead adapter, BNC cable, power supply, power splitter cable, and user guide.
Check Stock

Atomic Generator (Original mix)

  • ...RGEABILITY: It takes only 2 hours to recharge 80% battery of the power station through the wall outlet and 60W PD USB-C port simultaneously. You can also recharge your power station with an AC adapator when at home, through the car outlet during a road trip or simply use a Jackery SolarSaga 100..
  • SAFE & STEADY POWER SUPPLY: Armed with a 293Wh lithium-ion battery pack, the Explorer 300 features 2 Pure Sine Wave AC outlets that deliver stable and safe 300W power. The portable power station weighs only 7.1 pounds. You can simply rest assured in outdoor off-grid activities..
  • POWER YOUR EXPECTATIONS: Featuring 2* AC outlet, 1* PD 60W USB-C port (input/output supported) , 1* fast charge 3.0 port, 1*USB-A port and 1* DC car port, the power station can recharge itself and charge (up to) 6 devices (e.g.Drones, Macbook, Cameras, etc.) at the same time to satisfy your outdoor needs..
  • GREEN POWER SUPPLY: The power station is compatible with the Jackery SolarSaga 100 solar panel. The integrated MPPT controller enables the solar generator set to operate at its max power point, so that it speeds up the battery recharge, making them ideal portable power kits for tent camping, overland journey and etc..
  • WHAT YOU GET: 1* Jackery Explorer 300 Portable Power Station , 1*AC ....
Check Stock

Ray's Guides: Free Campgrounds in Idaho

  • ...% battery of the power station through the wall outlet and 60W PD USB-C port simultaneously. You can also recharge your power station with an AC adapator when at home, through the car outlet during a road trip or simply use a Jackery SolarSaga 100..
  • SAFE & STEADY POWER SUPPLY: Armed with a 293Wh lithium-ion battery pack, the Explorer 300 features 2 Pure Sine Wave AC outlets that deliver stable and safe 300W power. The portable power station weighs only 7.1 pounds. You can simply rest assured in outdoor off-grid activities..
  • POWER YOUR EXPECTATIONS: Featuring 2* AC outlet, 1* PD 60W USB-C port (input/output supported) , 1* fast charge 3.0 port, 1*USB-A port and 1* DC car port, the power station can recharge itself and charge (up to) 6 devices (e.g.Drones, Macbook, Cameras, etc.) at the same time to satisfy your outdoor needs..
  • GREEN POWER SUPPLY: The power station is compatible with the Jackery SolarSaga 100 solar panel. The integrated MPPT controller enables the solar generator set to operate at its max power point, so that it speeds up the battery recharge, making them ideal portable power kits for tent camping, overla....
Check Stock

In High Cotton (The Georgia Magnolias Book 1)

  • ...% battery of the power station through the wall outlet and 60W PD USB-C port simultaneously. You can also recharge your power station with an AC adapator when at home, through the car outlet during a road trip or simply use a Jackery SolarSaga 100..
  • SAFE & STEADY POWER SUPPLY: Armed with a 293Wh lithium-ion battery pack, the Explorer 300 features 2 Pure Sine Wave AC outlets that deliver stable and safe 300W power. The portable power station weighs only 7.1 pounds. You can simply rest assured in outdoor off-grid activities..
  • POWER YOUR EXPECTATIONS: Featuring 2* AC outlet, 1* PD 60W USB-C port (input/output supported) , 1* fast charge 3.0 port, 1*USB-A port and 1* DC car port, the power station can recharge itself and charge (up to) 6 devices (e.g.Drones, Macbook, Cameras, etc.) at the same time to satisfy your outdoor needs..
  • GREEN POWER SUPPLY: The power station is compatible with the Jackery SolarSaga 100 solar panel. The integrated MPPT controller enables the solar generator set to operate at its max power point, so that it speeds up the battery recharge, making them ideal portable power kits for tent camping, overla....
Check Stock