Reviews Power Steering Pump Pulley Puller

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

MAKOTOOLS Pulley Puller and Installer Kit, Power Steering Pump Remover Alternator AC Pulley Puller & Installer Set (MKT027)

  • AC Puller & Installer Set for alternator and power steering pulley, including the Quad 4. Fits Pulley shafts of 1-1/8″, 1-1/4″, 1-3/8″, 1-5/8″..
  • Manufactured from high-strength aluminum for extra durability and longevity..
  • Includes a blow molded carrying case with handle that provides safe storage, quick organization, and easy transportation..
  • Comes complete with adapters for unique style pulleys. Has reversible split jaws for easy access to pulley flanges without damaging pulley..
  • Installs & Removes pressed on alternator, power steering pump and other pulleys on late model GM & Chrysler engines as well as most other vehicles..
Check Stock

Small Block Chevy Serpentine System for 283 302 305 350 400 Engines- Power Steering and Alternator

  • Black Anodized Billet Aluminum Pulleys and Brackets CNC machined in the USA backed by our industry leading lifetime warranty!.
  • Works on 283 302 305 327 350 400 Engines With Long Water Pump.
  • Requires a Saginaw Power Steering Pump with Keyway Shaft and GM Alternator.
  • Kit Includes water pump pulley, alternator bracket, alternator fan, alternator pulley and cap, crank pulley, and power steering bracket with pulley. Alternator, Water Pump, and Power Steering Pump NOT included.
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
Check Stock

Powerbuilt 648460 Power Steering Pulley Puller, black

  • For removing pressed-on pulleys from power steering Pumps and alternators on or off vehicle..
  • For removing pressed-on pulleys from power steering pumps and alternators, on or off vehicle.
  • Four threaded holes on puller body allow narrow and wide jaw positions.
  • Heavy duty heat-treated alloy steel components.
Check Stock

SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS

  • Southwest Speed Heavy Duty Manual to Power Steering Gear Box Kit with 20:1 Gear Ratio, and 1400 Series Performance Power Steering Pump that fits 1976-1986 Jeep CJ > This Southwest Speed Steering Gear Box Kit includes Southwest Speed Re-manufactured Heavy Duty Factory Replacement Power Steering Gear Box featuring a 20:1 Gear Ratio with 13/16"-36 Input Shaft, and 1 1/8"-32 Spline Output Shaft.
  • Kit Includes: | Southwest Speed Re-manufactured 1976-1986 Jeep CJ Replacement Heavy Duty Power Steering Gear Box (# 105-2974) > Engineered for superior durability > O-Ring Ports > O.E. Spool Valves > Heavy Duty Gears > 20:1 Gear Ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2.750" Standard Piston Diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting.
  • Southwest Speed Re-manufactured 1976-1986 Jeep CJ 1400 Series Performance Power Steering Pump (# 149-1622) > Fits Jeeps with 258/304/401 cu. in. engines, as well as 4.0 Liter, with the OE Can > Re-manufactured > Perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.
  • Southwest Speed 1976-1986 Jeep CJ 5 3/4" Power Steering Pump V-Belt....
Check Stock

APDTY 134887 Power Steering Pump Pulley

  • Allows Replacement of the Original Power Steering Pump Pulley.
  • Fits Select 2002-2012 Acura Models, Select 2002-2011 Honda Models.
  • Match Vehicle to Compatibility Chart to Ensure Exact Fitment on Your Specific Model.
Check Stock

Orion Motor Tech OMT Gear Puller Set 3 4 6 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit

  • UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts.
  • BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3", 4", and 6" and reaches of 4.3", 5", and 7.3" to cover most applications.
  • 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage.
  • REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6" gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes.
  • TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

Power Steering Pump W/Bracket & Chrome Pulley, Chrome Saginaw Style, Compatible with Chevy SBC

  • Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap.
  • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
  • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head..
  • A 3 groove crank pulley may be required for use with short water pumps.
  • Female 5/8"-18 inverted flare fitting for the high pressure outlet.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock