Reviews Power Probe Pp3ls01
Power Probe III with Case & Accessories PP319FTC [Car Automotive Diagnostic Test Tool Digital Volt Meter ACDC Current Resistance Circuit Tester] with a Keychain Light Red
- POWER PROBE III: The PP3 is a Voltmeter and Continuity Tester, with Audible & Visual indicators along with two LED headlights to light up your work....
- SUPPLY POWER TO COMPONENTS: This circuit tester uses your car's battery to supply 12-24 volts of circuit breaker protected power or ground to activate....
- REMOVABLE 4MM PROBE TIP: The probe tip can be removed to adapt to any 4mm lead.
- BUILT-IN CIRCUIT BREAKER: The Power Probe 3 is protected by an 8 amp circuit breaker to provide additional safety..
- WHAT'S INCLUDED: (1) Power Probe 3, (2) 20ft Extension Leads, (1) Cigarette Lighter Adapter, (1) Battery Clip Set, (1) Carrying Case, and (1)....
Check StockPresidium Adamas Diamond and Moissanite Tester Authenticating Diamonds
- INDUSTRY’S THINNEST TIP: Detects colorless diamonds, moissanites, simulants instantly with metal alert. Accurate testing on colorless diamonds as small as 0.02 carats and diamond melees as small as 0.01 carats with micro probe purchased separately.
- DYNAMIC MICRO LED DISPLAY: Bright LED display provides clear and precise results. Automatic power off after 2 minutes of inactivity..
- SLEEK ERGONOMIC STYLING: Sleek light and portable design with chrome-brushed tip and ergonomic grip provides an easy and comfortable hand hold. Power with 3 x AAA batteries or included USB cable and adapter.
- EASY-TO-USE INTERCHANGEABLE PROBE: Retractable thermoelectric probe tip that ensures constant pressure between probe and gemstone, for enhanced accuracy. Damaged probes are easily replaced without downtime..
- BUILT-IN MEMORY: Memory chip conveniently stores up to 500 previous test records..
Check StockTramex RWS Roof and Wall Scanner
- Measuring Range: Four ranges of sensitivity up to a maximum depth of 4 (10 cm).
Check StockPh Meter, 4 in 1 TDS/PH/EC/Temp Water Quality Tester Pen, 0.01 High Accuracy Digital Ph Tester, Water Quality Tester for Household Drinking, Pool and Aquarium, Ph Tester
- The smallest pH pen with reliable testing performance for regular liquid e. g. pools, hydroponics, aquaculture, cooling towers, beverage making, body fluid, etc..
- Slim replaceable probe, suitable for test tubes.
- Intelligent functions: switch from ˚F to ˚C, automatic power-off, pH probe invalidation reminder (remind you to replace the probe for better performance).
- Complete kit: 3 types of premixed calibration solutions (4, 7, 10) and storage solution (3M KCL) all in one portable case.
Check StockPower Probe III w/Case & Acc - Green PP319FTCGRN [Car Automotive Diagnostic Test Tool Digital Volt Meter ACDC Current Resistance Circuit Tester]
- MASTER KIT: The Power Probe 4 Master Combo Kit combines the Power Probe 4, PPECT3000 and various accessories to provide the ultimate combination of....
- TEST A VARIETY OF CAR PARTS: The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors..
- PROVIDES 12-24V POWER TO CAR COMPONENTS: Like all Power Probe circuit-testers, it supplies 12-24V Power and Ground for functional component testing on....
- CIRCUIT TESTER: PPECT3000 will help you trace short and open circuits quickly and accurately.
- CONVENIENT CARRYING CASE: The Power Probe 4 comes in a convenient carrying case that fits all included accessories for easy portability..
Check StockKarl Fischer Titrator Auto MICROPROCESSOR Titrimeter Moisture Tester
- range: -2.00 to 14.00 pH, 32 to 122˚F (0 to 50˚C).
- Auto. Power-Off: 8 minutes without operation.
- Easy 1-3 points auto. calibration, recognizes 5 types of solutions (1.68, 4.00, 7.00, 10.01, 12.46).
- Auto Temp. Compensation (ATC) ensures accuracy in various temperatures (32-122˚F).
- High quality replaceable glass pH probe, suitable for regular water solutions e.g. pools&spas, hydroponics, environmental monitoring, cooling towers, beverage, etc..
- Large LCD with 3 backlit colors (indicating different modes), dual display of temp./pH, and reminders of completed calibrations and stable readings.
- COMPLETE KIT with READY-TO-USE calibration solutions, calibration bottles, storage solutions, AAA batteries, and a lanyard all in a rugged portable case.
Check StockRigol RP1001C Current Probe, Dc 300 Khz, 100a Peak
- Battery powered 9V internal for maximum external noise supression.
Check StockDigital Combo pH & Temperature Meter, Aquarium Thermometer pH Monitor with Automatic Calibration Function for Fish Tank Hydroponics Aquaculture Laboratory
- FEATURES: Large screen monitor with smart backlight which allows you to read easily even in dark sorroundings. pH and Temperature display with low battery indicator and the unit operates power saving mode..
- Multi-points Calibration: Up to 3 Points PH calibration (pH 7.0 / pH 4.01 / pH 10.01). It has advance one touch calibration function with automatic buffer recognition to avoid errors..
- ATC (Automatic Temperature Compensation): The monitor has ATC function so it will decrease the error of PH readings caused by the fluctuation of water temperature..
- HIGHLY ACCURATE MEASUREMENT: It has separate probe. When taking a measurement, simply place your probes into the solution and and then the accurate readings will be displayed on screen..
- POWER SOURCE: The monitor is operated with 4 x AA Alkaline Battery. It will go into power saving mode after around 5 minutes. In this way, it can provide battery life time for at least 3 months..
Check StockGAOHOU PH0-14 Value Detect Sensor Module + PH Electrode Probe BNC For Arduino
- Getting the voltage varies on what you’re using. The PH for this sensor is not at 0v for a PH7 it’s around 2.51v from the multi-meter and PH4 at 3.03. If you calculate the step, 2.51-3.03 =-0.52. The difference between ph4.01 and PH7 is 2.99..
- If you’re using a Particle product like the Photon or Argon, be aware of a bug. It’s a hardware issue with the analog ports fluctuating a ghost voltage. This fluctuation is enough at these low voltages reading to make your ph sway by .7 or more. To fix this, you’ll need to add a 0.1uF cap between the analog port your using and ground..
- This PH electrode probe must be calibrated with standard buffer solution before each use, and the electrode probe cannot be tested continuously for a long time, which will shorten its life. There are two trimmers on the circuit board. One of them is for offset adjustment (closest to BNC connector) accomplished by removing the Ph probe and shorting the BNC connector with a wire. The other trimmer is an upper limit threshold for the digital output pin..
Check StockPower Probe ECT3000B ECT 3000 Box
- 【Overload Protection for Longer Life】Auto circuit breaker protect the tool from overload through the inner circuit breaker to enables product last....
- 【4 Adjustable Modes probe tester】AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test.
- 【Easy to Operate】Power probe built-in head light allow you to work in the dark area, there will be beep tone when detecting,operate the tool....
- 【WIDE Vehicles Application】 Power probe tester can support 6-30V cars, boats, trailers, ATV, motor homes and many other vehicles. With the ability....
- 【3-YEAR WARRANTY Circuit Tester】 For damages caused by non-human factors, AUTOOL promise to resend power probe circuit tester parts for free....
Check StockGODIAG GT101 Power Circuit Probe Tester, 4 in 1 Circuit Tester, Fuel Injector Tester and Cleaner, Relay Tester, Current Detection with Overload Protection, Working Voltage Range 6V/12V/24V DC
- 【4 in 1 Multi-function Power Circuit Probe Tester】This automotive power circuit probe has multiple functions. It supports circuit voltage test & current detection, relay testing, circuit break finding, fuel injector cleaning and testing, etc. Working voltage range 6V-40V, support variety vehicles. This power circuit probe tools includes English instruction manual for your convenience!.
- 【Excellent Function & Quick Diagnostics】This automotive electrical system test tool is the perfect choice for automotive circuit probe tester. Unlike other circuit testers that require you to use a variety of tools to troubleshoot electrical system problem, our circuit testers are perfectly capable of performing multiple types of services such as continuity testing, component activation, fuse test, checking bad ground indicator, detect voltage and current, positive and negative power supply..
- 【Positive and negative power supply】When the vehicle's headlights, turn signals, lift windows, sunroofs and other functions fail, our power circuit probe kit can output positive and negative power to check whether circuit components are normal, and can also perform continuity checks and resistance checks. Through these checks and diagnoses whether the path of the car cir....
Check StockAUTOOL Power Probe Circuit Tester 9-30V Automotive Power Circuit Diagnostic Tool Car Fuse Relay Electrical System Tester Digital Voltage Short Finder Thermometer for Vehicle Cable Length 3.6Ft
- 【Widely Applicable】 The AUTOOL BT210 power circuit probe tester is specially used for maintenance and detection of 9-30V DC automobile circuits, which can quickly eliminate problems in the process of vehicle troubleshooting. Applicable to all types of vehicles, including automobiles, trucks, motorcycles, etc..
- 【Easy to Operate】 The circuit probe tester is easy to operate, and all operations can be completed with only two buttons. Briefly press the "M" key on the probe tester to switch five test modes. Briefly press the "Lighting" button on the probe tester to turn on or off the light beside the probe..
- 【Five Modes Optional】 Multi-function Mode: digital display voltage measurement, on-off test, positive and negative pole test. Voltage Test: digital display voltage measurement. On-off Test: can detect open circuit, path, virtual circuit and real circuit. Positive and Negative Pole Test: determine the positive and negative poles. Temperature Test: the pointer is equipped with a temperature sensor to detect the temperature of the specified contact..
- 【Excellent Design】 The design of this power short circuit probe is exquisite and compact, only 0.2 pounds, easy to carry and operate. The length of the wire is about 3.6 ft, which can cover the e....
Check StockArmada Technologies Pro48K Multi-Function Irrigation Test Kit with Tone Probe and Case
- DC detects the voltage value of the circuit under test.
- In addition,the circuit tester can also detects the resistance between the circuit probe under test and the auxiliary ground.
- Diode Test can quickly test the operation of the diode assembly and determines if it is conducting..
- 【Easy to Operate】Power probe built-in head light allow you to work in the dark area, there will be beep tone when detecting,operate the tool without looking at the menu once you are familiar with the tone.Provide 4.9ft of electrical wire for easy use..
- 【WIDE Vehicles Application】 Power probe tester can support 6-30V cars, boats, trailers, ATV, motor homes and many other vehicles. With the ability to power components such as radiator fans, starter motors, relays, window regulators, windshield wipers, etc. Powered by the car battery or cigarette lighter, no extra battery or cable required.
- 【3-YEAR WARRANTY Circuit Tester】 For damages caused by non-human factors, AUTOOL promise to resend power probe circuit tester parts for free within 3 years. For any needs, you are warmly welcome to contact us and we will get back to you ASAP within 24 hours..
Check Stock