Reviews Power Line Fitting Clamp

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

  • 100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
  • EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
  • USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
  • Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
  • 100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..
Check Stock

YuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…

  • 【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
  • 【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
  • 【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
  • 【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
  • The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
  • 【Application Scenarios】：It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..
Check Stock

Mardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring

  • ...se Remover】High-grade materials ensure quality performance over the lifetime of the tool. Designed to facilitate quick and easy access into tight areas with flat and thin head. Remove Fuel, Vacuum or Heater Hoses from 5/32”to 1/2”(4mm to 14mm) diameter. Simple to use, push the vacuum hose or fuel line off the fitting or tube by sliver jaw..
  • 【Fastener Remover and Hook Set】The fastener remover is designed for removing automotive audio equipment, trim panels, door panels, window trim, emblems and metal clips without damaging upholstery or the trim. The V style and U style design hooks for various fittings and hoses. Easy to percolate quench coolant, oil or any other part of the hose connection. Remove radiator hoses, transmission lines, heating lines, or any other rubber hose for installation joints in real time..
  • 【Multi Function】Work great for removing all kinds of difficult dismantling pipes, such as air pipes, power auxiliary pipes, cooling oil pipes, water pipes, etc. Also perfect for pulling o- rings & gaskets on hydraulic fittings, breaking a seal on a stuck hose, brake hoses/fuel hoses/gas lines/coolant hoses/radiator hoses, lawn mower gas lines and vacuum clamps & hydraulic piston seals, clear out a grease fitting, ect..
Check Stock

PEROMI 170 Pcs Single Ear Hose Clamp 11 Sizes 1/4-1 Inch Stepless Stepless Cinch Rings Crimp Assortment Kit for Water Pipe Plumbing and Automotive Use

  • [Include Size]This fuel line clamp kit set comes with 7 common sizes: 6-7mm, 7-8.7mm, 8.8-10.5mm, 9.6-11.3mm,9.8-12.3mm, 12-14.5mm, 13.7-16.2mm,15.3-18.5mm, 17.8-21mm, 20.3-23.5mm, 22.4-25.6mm,all size of tube clamp packed in a sturdy convenient case, can be used for a storage box..
  • [Premium Quality] High precision single ear stepless hose clamps are Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, a good choice for long-term use.Hose clamps are used to seal various types of hoses..
  • [Leak-Proof] These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using..
  • [Easy to Use] The slide the clamp ring onto the pipe, push the pipe onto the fitting and squeeze it with a clamp tool. Provide a firm, leak-free and reliable crimp joint connection..
  • [Application] Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
Check Stock

Gaming Light for Desk, Streaming Light with Desk Clamp Stand for Twitch

  • Gaming Light for Desk: 6 inches Ring light with 3 light modes (Cold Light,Mixed Light,Warm Light) and 10 adjustable brightness.
  • Streaming Light for Twitich: USB power supply, comes with 1/4''-20 female Thread, can work on Tripod, Monopod, Light Stand.
  • Desk Clamp Stand: height can be adjusted from 13.5inches/34.5centimeters to 23.2inches/59centimeters through fixed knob.
  • Desk Clamp: The clamp is adjustable for fitting different table through adjust the knob and screw. The clamp can support the table thickness from from 0.4 inches to 4.7 inches. with EVA silicone Non-Slip Mat.
Check Stock

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP

  • 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Check Stock

DERNORD 1.5" Inch (OD50.5mm) Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater (120V 1500W)

  • Stainless Steel Tri Clamp 1.5″ Inch (OD 50.5mm) , fit 1.5″(38mm) pipe if that pipe has a 2″ flange for tri clamp.
  • SUS304 Tri-clamp Foldback heating element provides 1500w 120v of power.
  • Easy to Install and fits Standard 1.5″ Tri Clamp fitting of American.
  • The shape is to minimize length and maximize heated surfaces.
  • Prevent dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

Sierra International Moeller Marine 053701-10, Six Gallon All-in-1 Fuel Tank Combo Package

  • Industy's first all in one fuel tank combo package.
  • Applications with 2 prong barb engine fitting: 1998 and up Mercury, All J/E, most Yamaha O/B engines.
  • Includes: one Universal fuel line, one quick disconnct to fuel connector, three fuel line connectors (Johnson/Evinrude, Mercury, Yamaha), tank connector with sealant and hose clamp.
Check Stock

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

Eliseo 1.5'' Sanitary Tri-Clamp, 304 Stainless Steel Single Pin Heavy Duty Tri Clamp Clover with Wing Nut for Ferrule TC 1.5''(4 Pack)

  • 【PACKAGE INCLUDE】: 4 Pack 1.5 inch single pin tri clamp with 4 Pack tri-clamp rubber Gasket.
  • 【SANITARY CLAMP SIZE】Tube OD: 1 Inch to 1-1/2 Inch, Tri Clamp: 1.5inch, Ferrule Size: 2inch (50.5MM).
  • 【HEAVY DUTY TRI-CLOVER CLAMP】Tri-Clamp made of 304 stainless steel, higher corrosion resistance than the 302 grade stainless steel, ideal for most intended tri clamp fitting connections.
  • 【WING NUT STYLE SINGLE-PIN CLAMP】The wing nut style tightening screw allows for quick and easy assembly without tools.
  • 【SANITARY FITTING FOR HOME BREWING】Single hinge clamp is widely used in beer, beverage, pharmaceutical and chemical industry.
Check Stock

DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 4 inch x 2 inch)

  • Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless steel 304 for resistance to corrosion and high temperatures.
  • Tri Clamp Bowl Reducer Ferrule Size 119MM fits 4" tri clamp.
  • Tri Clamp Bowl Reducer Ferrule Size 64MM fits 2" tri clamp.
Check Stock