Reviews Power Bearing

DAIWA TANACOM 750 Electrically operated(Japan Import-No Warranty)

  • Powerful Megatwin (switchable between high/low gear).
  • Jog Power Lever. Drag radiator (72.8lb Max Drag).
  • 22 Bearing System ( 1MBB + 21BB), Magsealed ball bearing (MBB).
  • Convenient 12 Volt DC Operation. Momentary winding power = 285lbs, Max winding power = 13/33lbs (Hi/Lo).
  • Line Capacity (Lb. Test / Yards)-MONO: 30/550, 40/380, J-BRAID: 65/660, 80/550.
Check Stock

ComfortBilt & Castle Serenity Pellet Stove Maintenance Kit

  • Included: Igniter (CB-IGNITER) Lower Auger Bearing (CB-LOWER-BEARING) Upper Auger Bearing (CB-UPPER-BEARING) Exhaust Gasket (6.5" dia.) (COMFORTBILT-EXHAUST-GASKET) Large Cleanout Gasket (HP22 & HP61) (LARGE-CLEANOUT-GASKET) Small Cleanout Gasket (HP22I & HP21) (SMALL-CLEANOUT-GASKET) Door Gasket 4ft. (CB Door Gasket) ComfortBilt Backup / Main Power Fuse (250V-10A): CB-FUSE.
Check Stock

OEMTOOLS 27119 Bearing and Race Installer Set, Seal Driver Set, Bearing Race Installer, Seal Installation Tool, Bearing Install Tool, Axle Seal Installer

  • ASSIST IN REPAIRS: This bearing race and seal driver set aids in wheel bearing repairs and rotor repairs.
  • Remove and install bearing races of all sizes with bearing driver set.
  • Bearing race punch set helps correct suspension system.
  • PREVENT DAMAGE: The seal installer kit prevents damage to race and axle housing.
  • Don’t have to use a power tool to use this bearing and seal driver.
  • EASY TO USE: The heavy duty seal driver takes minutes to use and saves energy.
  • Race bearing and seal driver set comes with easy instructions.
  • Discs and handles with tool bearing and race installer set can be organized in sturdy carrying case.
  • ADAPTABLE FIT: Bearing installation tool comes with 9 driver discs to fit most standard wheel bearings.
  • Driver discs with set are: 1.565 inch, 1.750 inch, 1.965 inch, 2.325 inch, 2.470 inch, 2.555 inch, 2.830 inch, 2.995 inch, and 3.180 inch.
  • VERSATILE TOOL: Flip discs in bearing pusher over and use to install seals.
  • Bearing and race installer kit is multifaceted.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

Abu Garcia C3 Catfish Special Baitcast Round Reel

  • 3 stainless steel ball bearings plus 1 roller bearing(6500 size).
  • 2 stainless steel ball bearings plus 1 roller bearing (7000 size).
  • Carbon Matrix drag system provides smooth, consistent drag pressure across the entire drag range.
  • Extended bent handle with power knob gives anglers additional torque and power for hard pulling fish..
  • 6 pin centrifugal brake gives consistent brake pressure throughout the cast.
  • Synchronized level wind system improves line lay and castability.
Check Stock

2pcs 6001-2RS Deep Groove Ball Bearing Double Sealed Ceramic ZrO2 High Precision Sealed Full White 12x28x8mm

  • 【full ceramic】 This ball bearing is made of high quality ceramic ZrO2 and PTFE material, features high precision, high speed, and wear small..
  • 【deep groove ball bearings】 This ball bearing is standardization size, is used for machinery manufacturing, equipment installation and maintenance..
  • 【smooth】 This is a sealed ball bearing, with good dustproof effect, resistant to corrosion and able to operate in harsh conditions.
  • 【low power consumption】 Small frictional resistance, low power consumption, high mechanical efficiency.
  • 【wide applications】 Standardization size, can be used for machinery manufacturing, equipment installation and maintenance..
Check Stock

ATPEAM 3 Jaw Inner Bearing Puller, Jaw Pilot Bearing Puller Auto Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

  • 3-Jaw Puller Set: Ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Premium Material: The 3-Jaw Bearing Extractor Puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Strong Puller Power: Structure design, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter..
  • Stable & Safe: The Blind Bearing Puller applies even pressure to preventing damage to bearings, also ensures stability during use.
  • Package Included: 1x 3-Jaw Inner Bearing Puller Tool. Size: 200x135mm. Wire rod length: 175mm. Bar length: 125mm. Arm length: 86mm..
Check Stock

GFK-160A GFK-160 Fireplace Blower Fan Kit for Heat N Glo, Quadra-Fire, Heatilator, Superior, Majestic, GTI Fireplaces, DV3732, Quadra-Fire 7100, Heat N Glo 6000CLX, SL-750TR Blower Fan Kit

  • ✿The GFK-160A fireplace blower fan kit includes dual ball bearing blower, magnetic thermostat, rheostat variable speed control, 3-prong power cord, rubber mounting feet to reduce noise and vibration, rre-wired harness for easy installation, installation instructions..
  • ✿Length x Width x Height: 12 13/16" x 4 5/16" x 4 5/16", Air discharge length: 4.75" (each blower), Motor Bearing Type: Ball, Outboard Bearing Type: Ball, Insulation: Class H (rated to 392°F), Motor RPM: 3000, Airflow in C.F.M: 160, Volts: 115, Frequency: 60 Hz, Amperage: 1.3, Power Cord:Yes, Power Cord Length: 83", Power Cord Type: 3-prong, Rheostat Variable Speed: Yes, Thermostat: Yes, Thermostat Type: Magnetic, Thermostat Temperature: 120° / 90°.
  • ✿The Heat-n-glo Fan Cross Reference Numbers: GFK-160, GFK-160A, FAB-1600, Heat N Glo 7002-1241, 7002-2944, 7102-2944, 7002-2311, 7002-2143, 7002-1615, 7102-1615, 7002-2152, 7102-2152, 7058-1221, Rotom HB-RB168, R7-RB168, Royal GFK-160, Regency 846515, 490-917, Fasco A133, 45KC49, UPPCO 1601881..
  • ✿High Quality Sealed Ball Bearing Motor - Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting. ✿Benefits: Helps reduce costly energy bills, Heats large rooms efficiently, Installs quickly and easily, Affordable..
Check Stock

R3-ZZ Bearing 3/16\x1/2\x10/51\ Miniature Ball Bearing Double Metal R3ZZ Radial Ball Bearing (10 Pack)

  • R3-ZZ Bearing: Both Sides Metal Shielded and pre-Lubricated with Grease, this bearing can effectively save grease,extending the life of machine..
  • Low frictional and irregular torque ensure highly efficient power transmission and smooth rotating performance..
  • Bearing Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity..
  • R3-ZZ Bearing Sizes: ID: 3/16"x OD 1/2" x W 10/51". The high accuracy of the bearings enables excellent high-speed performance..
  • Designed for many types of applications: Hand Piece, Hobby, RC Helicopters, RC Planes, RC Trucks, RC Cars, Beam Ball Bearing, plane wood cutter.
Check Stock

5PCS Deep U Groove Round Bottom Bearing Track Roller Wheel Stainless Steel Guide Pulley Rail Ball Rolling Bearing 8x22.5x14.5mm

  • DEEP GROOVE ROLLER BEARING: The deep U groove roller bearing is mostly used in industrial automation equipment and photographic equipment tracks..
  • DOUBLE ROW OF BALLS: The inside of the bearing have double row of balls, high precision, maintenance-free and long service life..
  • SMOOTH OPERATION: Stable and smooth operation, good mute effect, practical and durable..
  • STAINLESS BEARING STEEL MATERIAL: It is made of high quality stainless bearing steel material, rust and corrosion resistant..
  • HIGH PRECISION & HIGH HARDNESS: High precision, high hardness, high speed, high load, applicable for motors, toys, models, instrumentation, power tools, communication equipment, fitness equipment and other fields..
Check Stock

Highway Capacity Manual 2000 (HCM2KE)US UNIT

  • REPLACEMENT PART: Washing Tub Seal (4036ER2004A), Tub Seal Gasket (4036ER4001B), Large Bearing (4280FR4048L), Small Bearing (4280FR4048E) fit for Kenmore / Sears, LG.
  • HIGH QUALITY: External Fluororubber and Internal Steel Plate Tub Seal.
  • Large Bearing and Small Bearing with Double Seal.
  • POSSIBLE PROBLEM REPAIRING: Help to repair Noisy, Leaking, Shakes and Moves.
  • WARM PROMPT: Cut off the Power Supply When Installing to Prevent Accidents （If you don't know the size you need, and your model is not on the list, it should Not work for your Front Load Washer）.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this REPLACEMENT PART, simply return it for a full refund in 30 days. Premium Support & 12 months Warranty.
Check Stock

Adviace GFK-160 GFK-160A Fireplace Blower Fan Kit for Heat-N-Glo, Heat and Glow, Heat&Glo, Hearth and Home, Superior, Quadra-Fire Fireplaces, FAB-1600 FAB-1100 HB-RB168 1601881 950-3315 Blower Kit

  • ★ Included With Purchase ★ – replacement 180 CFM ball bearing blower assembly, rubber isolation feet for noise reduction, magnetic automatic thermostat sensor, rheostat variable speed controller, heavy duty grounded 3 prong power cord, wire harness, installation instructions..
  • ★ Specifications of The GFK-160A Fireplace Blower Fan Kit ★- Length x Width x Height: 12 13/16" x 4 5/16" x 4 5/16", Air discharge length: 4.75" (each blower), Motor Bearing Type: Ball, Outboard Bearing Type: Ball, Insulation: Class H (rated to 392°F), Motor RPM: 2700, Airflow in C.F.M: 160, Volts: 120, Frequency: 60 Hz, Thermostat: Yes, Thermostat Type: Magnetic, Thermostat Temperature: 120° / 90°, Rheostat Variable Speed: Yes, Power Cord Length: 83", Power Cord Type: 3-prong..
  • ★ 100% Ball Bearing Blower ★ - The fab-1600 fireplace blower kit comes standard with an wonderfully balanced, powerful and quiet 180 CFM blower. It's roller bearing motor is energy efficient and will absolutely improve the heating efficiency of your fireplace. ★ Reduces Noise and Installs Easily ★ – This gfk-160 fireplace blower kit also comes with rubber mounting feet which to reduce noise and vibration..
  • ★ Adjustable Fan Speeds, Turns On/Off Automatically ★- In addition to havi....
Check Stock