Reviews Power Amplifier 500watt Stereos

Scosche LOC2SLSD Car Stereo 2-Channel Adjustable Amplifier Add-On Adapter

  • ADD SUBWOOFERS: Works with high power car stereos (up to 80 watts per channel) to add subwoofer systems to any car stereo..
  • EASY TO INSTALL: Provides amplifier remote turn on output without removing car stereo..
  • OUTPUT CONVERSION: Converts car stereo speaker wire outputs to RCA Cable outputs..
  • ADDITIONAL CHANNEL: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos..
  • CONTROLLER: Includes mountable remote control with knob for adjusting subwoofer bass audio level from the dash..
  • REQUIRED FOR USE: You must have an aftermarket amplifier in order to use this product..
Check Stock

Fusion Apollo Series, MS-AP82400 8 Channel 2400-watt Marine Amplifier (150-watt RMS per Channel), a Garmin Brand

  • Powerful 2400-watt 8 channel amplifier (150-watt RMS per channel) designed to power up to eight pairs of speakers or four pairs of speakers and two subwoofers.
  • Easy Tune feature automatically adjusts audio settings for the best possible sound quality (requires setup using the Fusion-Link app on a compatible smartphone).
  • Class-D amplifier design uses less power for longer listening with reduced battery drainage.
  • Includes mounting bracket for simple installation.
  • Important Note: Amplifier is designed exclusively for use with Fusion DSP-enabled stereos (Apollo RA770, Apollo RA670, Apollo WB670 and RA210) and Fusion speakers.
Check Stock

Rockford Fosgate R2S-1X12 12 inch 500 Watt Subwoofer and Sub Enclosure Box and Boss R1100M 1100 Watt Amplifier with 8 Gauge Amplifier Wiring Kit

  • INCLUDES: This product includes 1 Rockford Fosgate R2S-1X12 12 inch 500 watt subwoofer, 1 sub enclosure box, 1 Boss R1100M 1100 watt amplifier, and a....
  • CAR SUBWOOFERS: The Rockford Fosgate R2S-1x12 12 inch 500 watt subwoofer is a single 12” shallow enclosure with 250 Watts RMS power handling wired....
  • CAR AMPLIFIER: The BOSS R1100M 1100 Watt Mono Car Audio Power Amplifier offers a MAX output of 1100 watts and an RMS output of 250 watts. It includes....
  • SUBWOOFER BOX ENCLOSURE: Rockford Fosgate R2S 1X12 12" 500W shallow loaded subwoofer sub enclosure.
  • AMPLIFIER WIRING KIT: Competition high quality fuse holder.
Check Stock

Seismic Audio Speakers Epicenter 5004 4 Channel Power Amplifier, 2000 Watts RMS Amplifier

  • Power Amplifier: Our Epicenter Amplifier is a beast! This is a 4 channel amplifier capable of pushing just about anything..
  • Audio Amplifier: This is a high end amplifier that is rack mountable. This power amplifier is easily capable of pushing eight 18" subwoofer cabinets or two pairs of dual 15" speakers..
  • 2000 Watts RMS Amp: This audio amplifier can handle 4 x 500 Watts RMS at 8 Ohms, 4 x 850 Watts RMS at 4 Ohms, 2 x 1600 Watts RMS at 8 Ohm Bridge of power..
  • 4 Channel Amplifier: The front of the Seismic Audio Speakers’ amplifier has channel A, B, C, and D volume controls, power indicator, clip indicator, protection mode indicator, and signal indicator..
  • Size And Weight Details: This 2000 Watts RMS amp fits standard 19” rack cases and weighs 69 lbs..
Check Stock

Rockford Fosgate T500x1br Power 500 Watt Class-BR Mono Amplifier

  • Our ultra-compact (1.6” x 4.3” x 8.3”) Power T500x1br mono amplifier provides the biggest power to size ratio delivering serious wattage to your subwoofers with 500 Watts of POWER.
  • Flexible vehicle integration in a compact amplifier that can produce high output power (RMS Power Output: 300 Watts x 1 @ 4-Ohm or 500 Watts x 1 @ 2-Ohm or 500 Watts x 1 @ 1-Ohm).
  • Featuring our Class BR, Rockford Fosgate’s patented Boosted Rail technology that sips current while retaining a storage reserve for extended bursts of power. Perfect for hybrid, electric, small cars, trucks, motorcycles, and side-by-side UTVs.
  • High-level auto turn-on, CLEAN circuit input/output clip detection, On-board Punch EQ with +18dB boost @ 45Hz and 12dB/octave Butterworth crossover make T500x1br an impressive POWER house.
  • Famous Rockford Fosgate build quality insures that the T500x1br will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

Rockville dB12 2000 Watt Peak/500w RMS Mono 2 Ohm Amplifier Car Amp

  • Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp.
  • Features of dB12: Rockville dB12 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 2000 Watts x 1 Channel. - 4 Ohm: 1200 Watts x 1 Channel.
Check Stock

MTX (2) S6510-44 10" 1000w RMS Subwoofers+Vented Sub Box+Mono Amplifier+Amp Kit

  • Package Includes: (2) MTX 10" Subwoofer Car Audio (1) Rockville KRYPTON-M3 4000w Peak/1000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC (1) Rockville Dual 10” Solo Baric L7/L5/L3 Vented Square Sub Enclosure Box 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal) 20 Feet of 14 AWG Blue Speaker Wire 4 Spade Terminals.
  • Features of S6510-44: MTX S6510-44 10" 1000 Watt Peak/500 Watt RMS Square 4-Ohm Car Subwoofer, RMS Power Handling: 500 Watts, Peak Power Handling: 1000 Watts, Recommended Amp Power: 250-500 Watts RMS, Impedance: Dual 4-Ohms, Frequency Response: 26Hz - 130Hz, Sensitivity: 84.5 dB, Volume Displacement: 45.65 cu in, Voice Coil: 2" inches, Mounting Depth: 6.625" inches Cut Out Diameter: 9.313" inches.
  • Features of RDVK10 : Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure. Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar, Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!....
Check Stock

Kenwood Kac-M8005 5-Channel Power Amplifier

  • KAC-M8005 - Kenwood 5-Channel 1600W Max Conformal Coated Bridgeable Marine Power Amplifier.
  • RMS Power Rating: 4 ohms: 50 watts x 4 chan. + 300 watts x 1 chan. 2 ohms: 75 watts x 4 chan. + 500 watts x 1 chan. Bridged, 4 ohms: 150 watts x 2 chan. + N/A.
Check Stock

Massive Audio E4 - Car Audio 4,000 Watt Nano Edge Series, Monoblock Car Amplifier, Bass Boost, 1 Ohm Stable

  • HIGH PERFORMANCE CAR AUDIO AMPLIFIER | The best competition amplifiers for cars in the market! This 12v car amplifier features: 2000 Watts x 1 RMS @ 1 Ohm / 4000 Watts MAX, Freq: 10Hz - 220Hz, 0~12dB, Built-In OEM Line Converter, High Power in Extremely Small Heat Sink, Bass Boost 0~12dB, and Ground Loop Isolator. Our monoblock amplifier for car provides real punch for your car stereos and car subwoofers!.
  • PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding and underpowered car subwoofer amplifier. Your car amplifier package and car subwoofer set aren't complete without our monoblock Massive amplifier. Our car audio subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. DC 5V - 15V Operating Voltage..
  • QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS FULL POWER | Hits its full power all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. It works great and provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry..
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER | Don't settl....
Check Stock

Rockville RXD-M1 2000 Watt Peak/500w @ 1 Ohm CEA RMS Mono Amplifier+Amp Kit

  • Package Includes: (1) Rockville RXD-M1 2000w Peak/500w RMS Mono 1 Ohm Amplifier Car Audio Amp. (1) Rockville RWK41 4 Gauge Complete Car Amp Wire Kit....
  • Features of RWK41: 1 � 17' High Grade Twisted Pair of 100% Copper RCA Cable. 17' � 4 Gauge Translucent Blue SuperFlex Power Cables..
  • Features of RXD-M1: Rockville RXD-M1 2000 Watt Peak/500 Watt Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings:....
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • (2) Alpine SPE-6090 6" x 9" 2 Way Pair Of Car Stereo Speakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover:....
Check Stock

pkg Focal SUB P30 12' 250W RMS Single 4-Ohm Subwoofer + SOLID2 Black 2-Channel 200W RMS Amplifier

  • SUB P30: 12" 4-ohm subwoofer | Polypropylene cone with butyl rubber surround | Power range: 100-250 watts RMS | Peak power handling: 500 watts.
  • Frequency response: 35-500 Hz | Sensitivity: 90.8 dB | Top-mount depth: 5-3/4" | Sealed box volume: 0.88-1.59 cubic feet | Ported box volume: 1.24-2.82 cubic feet.
  • SOLID-2 BLACK: 2-channel car amplifier | 75 watts RMS x 2 at 4 ohms (100 watts RMS x 2 at 2 ohms) | 200 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode) | CEA-2006 compliant.
  • Variable high- and low-pass filters (50-150 Hz, 12 dB/octave) | Class-A/B amplifier design | Frequency response: 10-60,000 Hz | Preamp- and speaker-level inputs.
  • 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier | Fuse rating: 25A x 1 | Dimensions: 8-11/16"W x 2"H x 7-7/8"D.
Check Stock

Monolith M-10 V2 10in THX Certified Select 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...eveloped from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with two ports that can utilize foam plugs to run the subwoofer in a sealed mode..
  • 500 Watt Amplifier: The 500‑watt RMS amplifier is built around a Texas Instruments 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (90....
Check Stock