Reviews Power Amp Modules

8400 DiabloSport inTune i3

  • ...exhaust buzz caused by AFM activation. Enables vehicles with AFM to stay in V8 mode at all times without reprogramming or re-flashing the vehicle onboard computer (ECU)..
  • Specs: Brand: DiabloSport | Fuel Type: Gas | Product Type: Performance Kit | Product Type: AFM/DFM/MDS Modules.
  • NOTE: Does not shut off the DFM, (dynamic fuel management) feature on 2019-2020 vehicles. If your 2019-2020 vehicle is equipped with DFM instead of AFM, you will need a different device to shut off DFM. Sprint will still disable Auto Start/Stop on DFM equipped vehicles..
Check Stock

Magnetic Game Controller Necklaces, Matching Necklace for Couples, Best Friend Necklace, Friendship Necklace (White+Gold)

  • Fully modular professional gamepad .Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
  • New next-generation (NXG) mini-sticks: a longer lifespan, and greater precision.
  • T-MOD technology and Hot Swap feature lets you swap a module with any other — at any point in a game.
  • Extremely high-precision modules and action buttons, with minimal response times.
  • Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
Check Stock

2021 PowerTIG 315LX 315 Amp AC/DC Pulse TIG/Stick Welder 240v Single Phase

  • Infineon IGBT Power Modules increase reliability and arc performance / 10 amp DC and 20 amp AC minim.
  • Pre flow and Post flow control of maximum shielding gas protection before and after the weld.
  • Pulse up to 750 Hz for maximum arc and heat control / HF or Lift TIG start with improved HF start ci.
  • Weld aluminum to a maximum of 5/8" single pass / Weld steel to a maximum of 1+" multi-pass.
Check Stock

2021 PowerTIG 250EX AC/DC Pulse TIG Stick Welder IGBT 1 or 3 Phase 220v

  • IGBT Power Modules increase reliability and performance.
  • Low 5 amp Start for TIG in AC and DC modes (+/- 2 amps).
  • 2T/4T amp/slope parameters for welding with torch switch.
  • Pre flow and Post flow control for maximum shielding gas protection before and after.
  • Improved HF start circuit for reduced maintenance issues.
Check Stock

Painless Performance 30133 Weatherproof PCM Controlled Fan Relay Kit, Ground Activated

  • Inexpensive protection for an electric fan and a vehicle's wire harness.
  • Relay activation by grounding the relay coil can be provided by most Powertrain Control Modules.
  • Provides direct battery power, protects PCM from voltage spikes and prevents the fan from back feeding through the vehicle's wire harness.
  • Kit includes weatherproof: SPST 35-amp relay, 30-amp circuit breaker, relay base with 10' harness, crimp-on terminals and mounting hardware.
Check Stock

XTOOL D9 Automotive Diagnostic Scan Tool with 3 Years Updates($900 Value), 2023 Newest, CAN FD & DoIP, Topology Mapping, 42+ Services, ECU Coding, Bi-Directional Control, All Systems Diagnostics

  • ...ties. NOTE: Please reach us with VIN # via xtoolofficial @ hot mail c om to check compatibility before purchase!.
  • 【Module Topology Mapping】XTOOL D9 intelligent diagnostic computer comes with Module Topology Mapping that displays interrelationships among various vehicle modules and views faulty modules in one glance to reduce guesswork performing all systems scan and improve diagnostic efficiency by 60% for automotive technicians, mechanics, car dealers and advanced DIY mechanics. NOTE: Software already released for GM, for Ford, for Toyota, for Honda, for Nissan, for Mazda and for BMW. More to come..
  • 【ECU Coding + Programming】XTOOL D9 ECU Programming & Coding tool can perform Offline Programming on Ford, Lincoln, Mazda vehicles, to update ECU software/firmware, program new modules, and fix software-driven fault codes, emission, and drivability issues.
  • ECU coding on VW, Audi, Skoda, and etc to match, code the new ECU and customize car settings. NOTE: NOT available to all makes & modules for above mentioned brands..
  • 【Guided Functions + Full Bi-Directional Controls】XTOOL D9 professional scan tool has full c....
Check Stock

Gloriana

  • X-TREME BOX: cUL US safety listed temporary power box provides safe and rugged work-site power distribution.
  • INLET/INPUT: Powered by 1 50A, 125/250v, 12, 000 watts locking California style CS-63, compatible with 19180008 and 19190008 (cords sold separately).
  • OUTLETS: 6 NEMA 5-20 2500-5000 watts, weatherproof, straight blade receptacles with independent GFCI modules & circuit breakers, 1 NEMA L6-30 7, 500 watts, weatherproof, twist-lock receptacle, with circuit breaker.
  • PASS-THROUGH: 1 50A 125/250v 12, 000 watts locking California style CS-63, for running boxes in series.
  • HEAVY DUTY 16 GAUGE steel stands up to rugged job sites with a CORROSION RESISTANT powder coat finish, rated to NEMA-3 with rainproof weather-strip...........
Check Stock

Generac 7000 50 Amp Smart Management Module, Gray

  • Wire-free technology: smart management modules are self-aware and operate autonomously.
  • automatically shedding the managed loads to allow the generator to recover if sensing a drop in frequency.
  • Prioritize loads: power items that are most important during an outage through customizable load priority selection and up to 8 modules per system can be used.
  • Lock-out feature: Smart Management Modules feature a lock-out system, which permits blocking of specific loads only when using generator power, allowing for the important loads to be powered more often.
  • Externally visible L.E.D. status: view load status without opening the electrical box for convenient management of power during an outage.
Check Stock

Generac 7006 100 Amp Smart Management Module, Gray

  • Wire-free technology: smart management modules are self-aware and operate autonomously.
  • automatically shedding the managed loads to allow the generator to recover if sensing a drop in frequency.
  • Prioritize loads: power items that are most important during an outage through customizable load priority selection and up to 8 modules per system can be used.
  • Lock-out feature: Smart Management Modules feature a lock-out system, which permits blocking of specific loads only when using generator power, allowing for the important loads to be powered more often.
  • Externally visible L.E.D. status: view load status without opening the electrical box for convenient management of power during an outage.
Check Stock

Case Club 4 Pistol and (up to) 29 Magazine with Accessory Pocket Pre-Cut Heavy Duty Waterproof Case with Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)

  • Holds 4 pistols and (up to) 29 magazines with magazine modules or 12 magazines with accessory pocket (+5 more in the magwells). Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure..
  • Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size..
  • Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to ....
Check Stock

SparkFun XBee Explorer Dongle - Red

  • UART communication board, XBee interface, USB interface.
  • XBee USB Adapter is a UART communication board which supports XBee connectivity, features UART interface, USB interface, and onboard buttons/LEDs,....
  • Test XBee modules: onboard buttons/LEDs for easy testing. Program/Configure XBee modules: make it easy to program/configure the XBee modules....
  • USB to UART module: features CP2102, provides UART interface and power output interface, connect it to your system easily.
  • Note:The XBee/ZigBee modules and Core2530 (B) in the photos are NOT included..
Check Stock

Moog 104HP Eurorack Case

  • Extruded aluminum Eurorack case with wood sides (no modules included).
  • 104 HP includes a 16 pin to 10 pin Eurorack power cable for your Mother-32.
Check Stock

Dexarm Luxury - All-in-one Desktop Robot Arm - Laser Engraver, Laser Cutter, 3D Printer and Pen Holder - High Precision and Expansibility - A Versatile Robotic Arm Machine

  • ALL-IN-ONE ROBOT ARM - Dexarm Maker is versatile and can do it all alone. This smart desktop arm has multiple uses: 3d printing, drawing and writing, picking and placing and is also a laser cutter and engraver machine. (2.5 W).
  • FIVE SWITCHABLE MODULES - Easy to attach changeable modules with just one click. No need for screws and cables when using this intelligent product. You can purchase accessories for the Luxury Dexarm such as Safety Enclosure (ASIN B09Q53XYL1), Sliding Rail (ASIN B09Q56YRBC) & Mini production line (ASIN B09Q5QZZY2) by looking for the Product Name & ASIN in the search bar.
  • EASY TO USE SOFTWARE - The table robotic arm comes with free interactive software that brings your ideas to reality in just a few clicks. A complete DIY kit.
  • COLORFUL TOUCHSCREEN - The 3.5-inch touchscreen of this robotic arm kit allows you to check the status and command Rotrics within your hand.
  • 0.05mm HIGH PRECISION - Patented decelerator design reduces the gap between gears, allowing 0.05mm extremely high repeatability. Perfect for industrial applications. 2500 mW Laser Class 4. P....
Check Stock